| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling |
| Tear Strength | Not less than 90 kN/m |
| Hardness | 85 Shore A (80A / 90A / 95A available) |
| Supply Ability | 2000 Pieces per Month |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Tensile Strength | Not less than 45 MPa |
| Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Material | Cast polyurethane elastomer |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Payment Terms | T/T,L/C,Western Union |
| Size | 1000 x 1000 mm |
| Colour | Natural amber or black, custom on request |
| Model Number | PU-BP-1000-A |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Abrasion Resistant Polyurethane Lined Steel Pipe Polyurethane Rubber Products 8
Slurry Pump Volute Liner Polyurethane Rubber Products Corrosion Resistant
Wear Resistant Diamond Groove Polyurethane Pulley Lagging Sheet 12mm Cold Bond
Polyurethane Conveyor Skirt Board Dust Sealing Strip 100mm Wide 85 Shore A
Product Specification
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling | Tear Strength | Not less than 90 kN/m |
| Hardness | 85 Shore A (80A / 90A / 95A available) | Supply Ability | 2000 Pieces per Month |
| Density | 1.10 - 1.15 g/cm3 | Service Temperature | -30 C to +80 C |
| Tensile Strength | Not less than 45 MPa | Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Material | Cast polyurethane elastomer | Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile | Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Payment Terms | T/T,L/C,Western Union | Size | 1000 x 1000 mm |
| Colour | Natural amber or black, custom on request | Model Number | PU-BP-1000-A |
| Certification | ISO 9001, ISO 14001, ISO 45001 | Place of Origin | China |
| High Light | Custom Cast Polyurethane Blind Plate ,Polyurethane Blind Plate 1000x1000mm | ||
Custom Cast Polyurethane Blind Plate 1000x1000mm Screen Deck Blanking Panel for Modular Media
This plate closes off a section of modular screen media where material has to travel across the deck without dropping through. It is poured as one solid casting at 1000 x 1000 mm, and the bolt hole layout is copied from the aperture panels already fitted to the machine, so a deck can be re-profiled for a new cut point inside a single shutdown. No welding, no adapter frames, no redrilling of the cross members.
The pre-polymer is degassed before pouring and the filled mould is cured in a temperature controlled oven, which holds hardness within +/- 3 Shore A across the whole face. Every moulded edge carries a 3 mm radius so that bolt torque does not start a stress crack, and inserts are cast in place rather than glued afterwards.
Every plate is made to drawing: outline size, bolt hole diameter and pitch, countersink depth, edge chamfer, lifting lugs, hardness and colour. Send a site sketch, a worn panel or a photo with a tape measure and the drawing is returned for approval before casting starts.
Plates that match an existing mould are shipped in 7 to 15 days. A new mould takes 12 to 15 days to build, after which repeat orders run from finished stock plate.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Packed in plywood cases with moisture barrier film and steel strapping. Full dimensional report and material batch certificate supplied with each shipment.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!