| Payment Terms | T/T,L/C |
| Application | Coal, iron ore, zinc ore separation |
| Supply Ability | 5000 Pieces per Month |
| Packaging Details | Export-grade wooden pallet with stretch film and shock-proof foam |
| Service Life | 6-12 months |
| Min Aperture | 3 mm |
| Open Area | 32% - 42% |
| Delivery Time | 7-15 days for stock, 20-30 days for production |
| Structure | embedded metal skeleton |
| Hole Design | Cone-shaped, anti-clogging |
| Material | Imported High Wear-Resistant Polyurethane |
| Model Number | ZC-PU-WR42 |
| Certification | ISO 9001:2015 |
| Place of Origin | Chengdu, China |
| Brand Name | Zhicheng Screen |
View Detail Information
Explore similar products
Wear Resistant Polyurethane Screen Panels Anticorrosion For Coal Preparation
Rubber Polyurethane Screen Panels Tensioned 2000mm Wide PU Mesh
Reinforced Polyurethane Screen Mesh 1200x2400mm Hydrolysis Resistant Anticorrosi
Polyurethane Frame Screen Panel 1000x1000mm 60mm Aperture PU Screen
Product Specification
| Payment Terms | T/T,L/C | Application | Coal, iron ore, zinc ore separation |
| Supply Ability | 5000 Pieces per Month | Packaging Details | Export-grade wooden pallet with stretch film and shock-proof foam |
| Service Life | 6-12 months | Min Aperture | 3 mm |
| Open Area | 32% - 42% | Delivery Time | 7-15 days for stock, 20-30 days for production |
| Structure | embedded metal skeleton | Hole Design | Cone-shaped, anti-clogging |
| Material | Imported High Wear-Resistant Polyurethane | Model Number | ZC-PU-WR42 |
| Certification | ISO 9001:2015 | Place of Origin | Chengdu, China |
| Brand Name | Zhicheng Screen | ||
| High Light | Wear Resistant Scalping Screen Mesh ,Wear Resistant Polyurethane Screen Panel ,Scalping Screen Mesh Polyurethane | ||
Scalping Screen Panel in Polyurethane for Duty After the Primary Crusher
Scalping is the least forgiving screening job on a plant. The feed comes straight from a jaw or gyratory, it is coarse, it is sharp, and it arrives in surges rather than at a steady rate. Everything downstream depends on this deck doing its job — if the scalping screen blinds or breaks, the secondary crusher gets flooded and the whole circuit slows down.
Built for surge loading. A scalper sees the peak, not the average. Panels are specified with the frame carrying structural load so that a surge of coarse rock does not deflect the deck into the support rails or work the fixings loose.
Sharp edges, not round particles. Crushed rock has edges, and edges cut. A compound with tear strength at or above 80 kN/m resists the cutting action that opens up a slot or splits a land, which is the dominant wear mechanism on scalping duty.
Aperture that holds the cut. The scalping cut point sets the load on the secondary crusher. If the aperture wears open by 5 mm over a campaign, the secondary gets more fines it did not need and the circuit loses capacity. A moulded polyurethane aperture holds its dimension far longer than rubber or punched plate.
Section sized by drop height. Feed-end rows at 40 mm, downstream at 25–30 mm. On most scalpers this reduces total panel mass by a third against an all-40 mm deck, with no loss of life where the bed is thin.
Where it runs
Scalping ahead of secondary and tertiary crushers, run-of-mine screening at the pit, C&D material ahead of a jaw, and slag or clinker handling where the feed is coarse and hot-material risk is absent.
Technical data
|
Item |
Specification |
|
Thickness |
40 mm standard; 25–60 mm on request |
|
Panel size |
Custom cut to your deck drawing |
|
Aperture |
3–100 mm, slotted or square; tapered option |
|
Hardness |
Shore A 85 (75–95 available) |
|
Compound |
Hydrolysis-resistant wear grade polyurethane |
|
Density |
1.10–1.15 g/cm³ |
|
Tensile strength |
≥ 30 MPa |
|
Tear strength |
≥ 80 kN/m |
|
Abrasion (DIN 53516) |
≤ 40 mm³ |
|
Rebound resilience |
≥ 40 % |
|
Service temperature |
−30 °C to +80 °C |
|
Fixing |
Pin and sleeve, bolt-through, or rail clamp |
Ordering
Send crusher setting (CSS), maximum lump size, feed rate, deck drawing and drop height. The CSS and the scalping cut point have to be consistent; if they are not, we will flag it before quoting.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!