| Hardness | 85 Shore A (80A / 90A / 95A available) |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Supply Ability | 2000 Pieces per Month |
| Tensile Strength | Not less than 45 MPa |
| Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Material | Cast polyurethane elastomer |
| Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 12 mm |
| Size | To drum radius / OEM drawing |
| Colour | Natural amber or black, custom on request |
| Model Number | PU-OEM-12-T |
| Place of Origin | China |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
View Detail Information
Explore similar products
Abrasion Resistant Polyurethane Lined Steel Pipe Polyurethane Rubber Products 8
Slurry Pump Volute Liner Polyurethane Rubber Products Corrosion Resistant
Wear Resistant Diamond Groove Polyurethane Pulley Lagging Sheet 12mm Cold Bond
Polyurethane Conveyor Skirt Board Dust Sealing Strip 100mm Wide 85 Shore A
Product Specification
| Hardness | 85 Shore A (80A / 90A / 95A available) | Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C | Supply Ability | 2000 Pieces per Month |
| Tensile Strength | Not less than 45 MPa | Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Material | Cast polyurethane elastomer | Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling | Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) | Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 12 mm | Size | To drum radius / OEM drawing |
| Colour | Natural amber or black, custom on request | Model Number | PU-OEM-12-T |
| Place of Origin | China | Certification | ISO 9001, ISO 14001, ISO 45001 |
| High Light | OEM Molded Polyurethane Blind Plate ,Polyurethane Blind Plate 12mm ,Abrasion Resistant Polyurethane Blind Plate | ||
OEM Custom Molded Polyurethane Blind Plate 12mm Abrasion Resistant Trommel Deck Cover
Scrubbers and trommels are hard on deck covers: the load tumbles, the water is dirty and the plate is usually curved or profiled rather than flat. This 12 mm blind plate is produced from an OEM drawing or from a sample that is measured and reverse engineered, so the finished cover follows the drum radius and the existing fixing strap positions.
Curved covers are cast in a machined aluminium or steel mould with the radius built in, which avoids the spring-back you get when a flat sheet is bent cold. Ribs, drainage grooves, strap recesses and locating bosses are all formed in the mould rather than cut later, so the geometry stays consistent from the first unit to the five hundredth.
The 12 mm section is intended for covers supported by a drum shell or strap frame. For unsupported spans the thickness is increased to 15 or 20 mm. Standard grade is 85 Shore A with a high abrasion resistant package for slurry with sharp sand; 90 Shore A is used where the cover also takes direct impact from the feed chute.
New moulds are typically 12 to 15 working days. Once tooling exists, repeat covers are cast against the existing pattern, and drawings are held on file so a replacement can be run without re-measuring on site.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Covers are crated on edge in plywood cases with foam separators, steel strapped, and marked with part number and batch.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!