| Tear Strength | Not less than 90 kN/m |
| Hardness | 85 Shore A (80A / 90A / 95A available) |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Tensile Strength | Not less than 45 MPa |
| Supply Ability | 2000 Pieces per Month |
| Material | Cast polyurethane elastomer |
| Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 10 / 15 / 20 mm |
| Size | 305 x 305 mm |
| Colour | Natural amber or black, custom on request |
| Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling |
| Model Number | PU-BS-305-M |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Abrasion Resistant Polyurethane Lined Steel Pipe Polyurethane Rubber Products 8
Slurry Pump Volute Liner Polyurethane Rubber Products Corrosion Resistant
Wear Resistant Diamond Groove Polyurethane Pulley Lagging Sheet 12mm Cold Bond
Polyurethane Conveyor Skirt Board Dust Sealing Strip 100mm Wide 85 Shore A
Product Specification
| Tear Strength | Not less than 90 kN/m | Hardness | 85 Shore A (80A / 90A / 95A available) |
| Density | 1.10 - 1.15 g/cm3 | Service Temperature | -30 C to +80 C |
| Tensile Strength | Not less than 45 MPa | Supply Ability | 2000 Pieces per Month |
| Material | Cast polyurethane elastomer | Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) | Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 10 / 15 / 20 mm | Size | 305 x 305 mm |
| Colour | Natural amber or black, custom on request | Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling | Model Number | PU-BS-305-M |
| Certification | ISO 9001, ISO 14001, ISO 45001 | Place of Origin | China |
| High Light | Polyurethane 305x305mm Modular Screen Deck ,Polyurethane Modular Screen Deck | ||
Polyurethane Blind Segment 305x305mm Modular Screen Deck Blanking Mat Custom Formulated
Modular decks are designed so that a single panel can be swapped by hand. This blind segment uses that same logic: it is a solid polyurethane panel, 305 x 305 mm, with the standard pin or rail fixing of the deck it belongs to. One aperture panel out, one blind segment in, and screening area drops exactly one module without touching the frame.
Constant water contact and high pH are the two conditions that shorten polyurethane life. This compound is formulated on a polyether pre-polymer with a hydrolysis stabiliser, and it keeps its hardness after long immersion instead of turning soft and swelling. Segments are also available in a 95 Shore A grade for high pressure spray zones.
Blind segments are normally used to trim the effective screening length when a plant changes cut point, and to close the outer modules that carry the highest wear. Because each segment is a separate item, the deck can be tuned module by module and returned to full open area later if the duty changes back.
Hardness, colour and hydrolysis package are selected against your slurry analysis. Segments can be marked with a moulded number on the underside so operators can identify grade on site.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Segments are boxed in counted layers with film between each panel; plywood case is steel strapped and palletised.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!