| Tear Strength | Not less than 90 kN/m |
| Hardness | 85 Shore A (80A / 90A / 95A available) |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Tensile Strength | Not less than 45 MPa |
| Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Material | Cast polyurethane elastomer |
| Supply Ability | 2000 Pieces per Month |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 15 mm PU on 6-8 mm steel |
| Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling |
| Size | Custom outline to drawing |
| Colour | Natural amber or black, custom on request |
| Place of Origin | China |
| Model Number | PU-SB-15-H |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
View Detail Information
Explore similar products
Abrasion Resistant Polyurethane Lined Steel Pipe Polyurethane Rubber Products 8
Slurry Pump Volute Liner Polyurethane Rubber Products Corrosion Resistant
Wear Resistant Diamond Groove Polyurethane Pulley Lagging Sheet 12mm Cold Bond
Polyurethane Conveyor Skirt Board Dust Sealing Strip 100mm Wide 85 Shore A
Product Specification
| Tear Strength | Not less than 90 kN/m | Hardness | 85 Shore A (80A / 90A / 95A available) |
| Density | 1.10 - 1.15 g/cm3 | Service Temperature | -30 C to +80 C |
| Tensile Strength | Not less than 45 MPa | Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Material | Cast polyurethane elastomer | Supply Ability | 2000 Pieces per Month |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) | Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 15 mm PU on 6-8 mm steel | Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling | Size | Custom outline to drawing |
| Colour | Natural amber or black, custom on request | Place of Origin | China |
| Model Number | PU-SB-15-H | Certification | ISO 9001, ISO 14001, ISO 45001 |
| High Light | Steel Backed Polyurethane Blind Plate ,Polyurethane Blind Plate 15mm | ||
Steel Backed Polyurethane Blind Plate 15mm Wear Resistant Blanking Pad Custom Molded
Where the load is coarse rock rather than slurry, a free standing elastomer plate eventually creeps at the bolt holes. The answer is to cast the polyurethane directly onto a prepared steel backing plate so the two behave as one composite section. The elastomer is chemically bonded during cure, not glued afterwards, and the steel carries the bolt load while the PU absorbs the impact.
The backing plate is grit blasted, primed with a bonding agent and located in the mould before pouring. Because the bond forms while the elastomer is still reactive, pull-off strength stays stable across the service temperature range instead of degrading at the first hot campaign.
Standard elastomer thickness is 15 mm on a 6 mm or 8 mm backing plate, giving an overall section of 21 to 23 mm. Backing plate outline, hole pattern, lifting eyes and edge return can all be produced to your drawing. Hardness is normally 90 Shore A for this duty, and 95 Shore A is available for the most aggressive positions.
Each unit is checked for bond integrity by visual and tap test across the full face, and overall thickness is measured at nine points. Records are kept against the batch number printed on the backing plate.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Face protected by a removable film, units separated by foam, crated in plywood with steel strapping and lifting marks.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!