| Hardness | 85 Shore A (80A / 90A / 95A available) |
| Material | Cast polyurethane elastomer |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling |
| Supply Ability | 2000 Pieces per Month |
| Colour | Natural amber or black, custom on request |
| Payment Terms | T/T,L/C,Western Union |
| Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile |
| Thickness | 20 mm |
| Size | Cut to drawing up to 2000 x 1200 mm |
| Place of Origin | China |
| Model Number | PU-BB-20-C |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
View Detail Information
Explore similar products
Abrasion Resistant Polyurethane Lined Steel Pipe Polyurethane Rubber Products 8
Slurry Pump Volute Liner Polyurethane Rubber Products Corrosion Resistant
Wear Resistant Diamond Groove Polyurethane Pulley Lagging Sheet 12mm Cold Bond
Polyurethane Conveyor Skirt Board Dust Sealing Strip 100mm Wide 85 Shore A
Product Specification
| Hardness | 85 Shore A (80A / 90A / 95A available) | Material | Cast polyurethane elastomer |
| Density | 1.10 - 1.15 g/cm3 | Service Temperature | -30 C to +80 C |
| Packaging Details | Plywood case with moisture barrier film, foam separators and steel strapping, export grade | Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m | Delivery Time | 7-15 days for existing mould sizes, 20-25 days for new tooling |
| Supply Ability | 2000 Pieces per Month | Colour | Natural amber or black, custom on request |
| Payment Terms | T/T,L/C,Western Union | Abrasion Loss | Not more than 60 mm3 (DIN 53516) |
| Customisation | Made to drawing: size, bolt pattern, hardness, edge profile | Thickness | 20 mm |
| Size | Cut to drawing up to 2000 x 1200 mm | Place of Origin | China |
| Model Number | PU-BB-20-C | Certification | ISO 9001, ISO 14001, ISO 45001 |
| High Light | PU Chute Liner Plates ,Chute Liner Plates Polyurethane Rubber Products ,20mm PU Chute Liner Plates | ||
Polyurethane Blind Board 20mm Thick Anti Stick Chute Liner Plate Custom Cut to Drawing
Wet sticky material is the usual reason a transfer chute plugs. This board gives the chute wall a smooth, low friction face that material slides over instead of smearing onto. It is supplied as a solid blind board, meaning no perforations at all, and it is cut to the exact outline of the panel it replaces so the liner drops straight into the existing bolt pattern.
Perforated or slotted liners let fines migrate behind the plate, and once that happens the bolts work loose and the liner starts to buckle. A fully blind board seals the wall, keeps the substrate dry and spreads the impact load across the full panel area rather than around hole edges.
The 20 mm section keeps enough stiffness to bridge support spacing of up to 600 mm without a steel backing plate, while the elastomer face recovers from impact instead of denting. Compared with mild steel liners of the same thickness, the board is roughly one eighth of the weight, which makes single person handling realistic during maintenance.
Send the outline drawing, hole positions and thickness. If only a worn board is available, we will reverse-draw it and return a dimensioned sketch for your approval before cutting.
| Material | Cast polyurethane elastomer, MDI pre-polymer system |
| Hardness | 85 +/- 3 Shore A (80A / 90A / 95A on request) |
| Thickness | 10 / 15 / 20 / 25 / 30 mm |
| Plate Size | 1000 x 1000 mm standard, custom up to 2000 x 1200 mm |
| Dimensional Tolerance | +/- 1.0 mm length and width, +/- 0.5 mm thickness |
| Tensile Strength | Not less than 45 MPa |
| Tear Strength | Not less than 90 kN/m |
| Abrasion Loss | Not more than 60 mm3, DIN 53516 |
| Density | 1.10 - 1.15 g/cm3 |
| Service Temperature | -30 C to +80 C |
| Colour | Natural amber, black or matched to sample |
| Fixing Method | Bolt-through, countersunk insert or steel backed |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
Boards are stacked flat on plywood pallets, interleaved with film, and steel strapped. Cut list and material certificate travel with the shipment.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!