| Packaging Details | Export-grade wooden case, cyclone and spare kit packed in separate foam-lined compartments |
| Payment Terms | T/T,L/C,PayPal,Western Union |
| Spare Kit Contents | 2 apex spigots, 1 vortex finder, 1 liner, 1 feed chamber, gasket set |
| Supply Ability | 500 Sets per Month |
| Delivery Time | 7-15 days for stock, 20-30 days for production |
| Wearing Parts | Apex spigot, vortex finder, one-piece liner, feed chamber, gaskets |
| Nominal Feed Capacity | 3 - 6 m3/h at 0.2 MPa |
| Apex Spigot Range | 8 / 10 / 12 mm replaceable |
| Feed Head | Replaceable PU, tangential inlet |
| Vortex Finder Range | 22 / 25 / 28 mm replaceable |
| Body Weight | 5 kg assembled |
| Cone Diameter | 75 mm (3 inch) |
| Model Number | HC-PU-075K |
| Place of Origin | Chengdu, China |
| Certification | ISO 9001, ISO 14001, ISO 45001 |
View Detail Information
Explore similar products
125mm Hydrocyclone Cluster Lightweight PU Liner Fine Particle Classification 8
Mineral Slurry Classification 60m3/H Hydrocyclones 380mm Desanding Hydrocyclone
250mm Hydrocyclone Sand Washing 30t/H Hydrocyclone In Mineral Processing
500mm Dewatering Hydrocyclone Wear Resistant Underflow Spigot PU Liner Tailings
Product Specification
| Packaging Details | Export-grade wooden case, cyclone and spare kit packed in separate foam-lined compartments | Payment Terms | T/T,L/C,PayPal,Western Union |
| Spare Kit Contents | 2 apex spigots, 1 vortex finder, 1 liner, 1 feed chamber, gasket set | Supply Ability | 500 Sets per Month |
| Delivery Time | 7-15 days for stock, 20-30 days for production | Wearing Parts | Apex spigot, vortex finder, one-piece liner, feed chamber, gaskets |
| Nominal Feed Capacity | 3 - 6 m3/h at 0.2 MPa | Apex Spigot Range | 8 / 10 / 12 mm replaceable |
| Feed Head | Replaceable PU, tangential inlet | Vortex Finder Range | 22 / 25 / 28 mm replaceable |
| Body Weight | 5 kg assembled | Cone Diameter | 75 mm (3 inch) |
| Model Number | HC-PU-075K | Place of Origin | Chengdu, China |
| Certification | ISO 9001, ISO 14001, ISO 45001 | ||
| High Light | 75mm Desliming Hydrocyclone ,Desliming Hydrocyclone Hydrolysis Resistant ,PU Liner Clay Hydrocyclones | ||
Small cyclones in clay, kaolin and chemical plants spend their life in water that is warm, slightly acidic or alkaline, and often loaded with dissolved salts. In that environment the liner material decides the maintenance interval, not the flow rate. This 75 mm unit is specified for exactly that service.
The cast polyurethane used here retains over 85 percent of its tensile strength after 168 hours of immersion at 70 ℃, which means the liner does not soften, swell or go chalky in a continuously wet circuit. A one-piece casting removes the bonded seams where water ingress normally starts.
The liner operates in slurries from pH 2 to pH 13, including chloride bearing process water, without a protective coating that could chip. Where a steel body would need a coating maintenance programme, the polyurethane surface simply keeps working.
A 75 mm cone produces a sharp cut between 10 and 40 µm, and because the liner is cast in one piece the apex seat and cone taper stay concentric. That keeps the classification curve repeatable even after several apex changes.
Every part is a drop-in fit, so a changeover does not need measuring, cutting or bonding. Complete units and kits are produced under ISO 9001, ISO 14001 and ISO 45001 certified systems.
| Liner Type | One-piece hot cast polyurethane (PU) liner |
| Liner Hardness | 88 - 92 Shore A |
| Housing Material | Carbon steel with anti-corrosion coating, SS304 optional |
| Feed Pressure | 0.06 - 0.25 MPa |
| Separation Range | 10 - 150 µm |
| Classification Efficiency | ≥ 85% |
| Underflow Spigot | Replaceable PU spigot, ceramic option |
| Overflow Vortex Finder | Replaceable PU vortex finder |
| Hydrolysis Resistance | ≥ 85% tensile retention after 168 h immersion at 70 ℃ |
| Corrosion Resistance | pH 2 - 13 slurry with chloride bearing water |
| Process Connection | Bolt-on flange / quick clamp, DN50 - DN200 |
| Spare Parts Kit | Apex spigot, vortex finder, inner liner, feed chamber, gaskets |
Kaolin and ball clay desliming, ceramic and glaze slurry classification, chemical precipitate washing and pigment fines recovery.
Describe your slurry chemistry and target cut and we will confirm the liner grade, apex bore and kit contents.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!