| Payment Terms | L/C,T/T |
| Mounting | Tensioned bow-shaped |
| Type | Tensioned / Bow-shaped Screen |
| Delivery Time | 7-15 days for stock, 20-30 days for production |
| Max Width | 2000mm |
| Thickness | Determined by sieve hole |
| Material | Imported High Wear-Resistant Polyurethane |
| Supply Ability | 5000 Pieces per Month |
| Application | Coal washing, mineral processing, dewatering |
| Aperture Range | 2mm - 180mm |
| Max Length | 3950mm |
| Packaging Details | Export-grade wooden pallet with stretch film and shock-proof foam |
| Model Number | ZC-PU-TENSION |
| Brand Name | Zhicheng Screen |
| Certification | ISO 9001:2015 |
| Place of Origin | Chengdu, China |
View Detail Information
Explore similar products
305x305mm Polyurethane Screen Panels Tensioned PU Dewatering Screen
Steel Core Reinforced PU Mesh 2000mm Wide Poly Screen Panels
Polyurethane Dewatering Screen Panels Slotted 0.3mm Aperture PU Mesh
Hydrolysis Resistant Polyurethane Screen Panels 90 Shore A PU Mesh
Product Specification
| Payment Terms | L/C,T/T | Mounting | Tensioned bow-shaped |
| Type | Tensioned / Bow-shaped Screen | Delivery Time | 7-15 days for stock, 20-30 days for production |
| Max Width | 2000mm | Thickness | Determined by sieve hole |
| Material | Imported High Wear-Resistant Polyurethane | Supply Ability | 5000 Pieces per Month |
| Application | Coal washing, mineral processing, dewatering | Aperture Range | 2mm - 180mm |
| Max Length | 3950mm | Packaging Details | Export-grade wooden pallet with stretch film and shock-proof foam |
| Model Number | ZC-PU-TENSION | Brand Name | Zhicheng Screen |
| Certification | ISO 9001:2015 | Place of Origin | Chengdu, China |
| High Light | Tensioned Polyurethane Screen Panel ,Pin And Sleeve Polyurethane Screen ,Pin And Sleeve PU Screen | ||
Tensioned Polyurethane Screen Panel for Fast, Repeatable Deck Changes
A tensioned deck is judged on two things: how long a panel change takes, and whether the panel is still tight a month later. Most tensioned media fail the second test. The fixing creeps, tension drops, the panel drums on the frame and the deck starts leaking oversize — and by the time anyone notices, the damage is already in the product.
This panel is built around the fixing, not around the aperture.
Pin and sleeve fixing, no frame modification. The pin seats into a moulded sleeve that carries load through the panel body rather than through a bolt hole. Nothing is drilled into your deck frame, so the panel drops onto the existing fixing points and comes off the same way. A deck set up for rubber or steel media can be converted without re-machining the frame.
Tension distributed, not concentrated. A panel held at four corner bolts pulls tight at the corners and stays slack in the middle, which is where it drums first. The sleeve arrangement loads the panel along its full length, so the working surface stays in contact with the frame across the whole span.
One fitter, no crane. A 40 mm panel is heavy enough to need two people to carry it across a walkway. The pin-and-sleeve layout lets one fitter lift, locate and seat a panel from above the deck, which is what determines real change-out time on a plant running three shifts.
Wears at the surface, not at the fixing. Reinforcement sits around the fixing zone so abrasive slurry attacks the panel face instead of eating the sleeve. That is the difference between a panel retired for worn apertures and one retired because it will no longer stay fixed.
Where it runs
Coal preparation and washing decks, sand and gravel wash plants, dewatering and drain sections, quarry sizing screens and mobile plant decks — any deck that already uses a tensioned fixing pattern, or is being converted from rubber or wire where frame modification is not an option.
Technical data
|
Item |
Specification |
|
Thickness |
40 mm standard; 25–60 mm on request |
|
Panel size |
Custom cut to your deck drawing |
|
Aperture |
3–100 mm, slotted or square; tapered option |
|
Hardness |
Shore A 85 (75–95 available) |
|
Compound |
Hydrolysis-resistant wear grade polyurethane |
|
Density |
1.10–1.15 g/cm³ |
|
Tensile strength |
≥ 30 MPa |
|
Tear strength |
≥ 80 kN/m |
|
Abrasion (DIN 53516) |
≤ 40 mm³ |
|
Rebound resilience |
≥ 40 % |
|
Service temperature |
−30 °C to +80 °C |
|
Fixing |
Pin and sleeve, bolt-through, or rail clamp |
Ordering
Send the deck drawing or a measurement sheet with fixing centres, panel count per deck, screen motion and cut point. We return a dimensioned drawing with the fixing positions marked for your approval before production.
FAQ
What is your MOQ and lead time? MOQ is 10 pcs. Standard lead time is 15 days, and standard mold making takes 10 days.
Will the panel fit a frame that currently takes rubber? Usually yes. Send the fixing centres and the panel outline; the pin positions are moulded to match your existing frame rather than to a standard pattern.
How much tension drop should I expect over a campaign? With the sleeve taking the load instead of a bolt hole, tension stays stable until the panel face itself wears through. If a panel drums early, the cause is normally a worn pin, not the panel — check the pins at every change-out.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2013
Total Annual:
3,000,000-USD 3,000,000
Employee Number:
21~50
Ecer Certification:
Verified Supplier
Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ... Chengdu Zhicheng Screen Co., Ltd. is located in Chengdu, a city rich in natural resources. After more than ten years of hard work, the company has developed into a professional screen manufacturing enterprise and a leading brand supplier of screens for the mining machinery industry. Our produ...
Get in touch with us
Leave a Message, we will call you back quickly!