JINXING MATECH CO LTD
| Payment Terms | L/C, D/A, D/P, T/T, Western Union |
| Supply Ability | 10tons/M |
| Delivery Time | 30~60 days |
| Packaging Details | Plywood Case |
| Material | MP35N |
| Density | 8.43 g/cm3 |
| Melt Point | 1440 C |
| Rigid modulus | 80.7KN/mm2 |
| Modulus of elasticity | 234 KN/ mm2 |
| linear expansion coefficient | 12.8 a/10-6℃-1 |
| Standard | ASTM F562 AMS 5844 AMS 5845 |
| Heat Treatment | Solution Annealing, Aging treatment |
| Brand Name | JINXING |
| Model Number | MP35N alloy wire |
| Certification | ISO 9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Supermendur 1J22 Co50V2 Soft Magnetic Alloy Tube With High Magnetic Flux
4j29 (Kovar) , 4j32, 4j33, 4j34,Nickel Alloy Manufacturer
High Thermal Expansion Permendur2V 1J22 Co50V2 Bar
Magnetic Conductor Core Precision Alloy Hiper Co50A 1J22 Rod
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union | Supply Ability | 10tons/M |
| Delivery Time | 30~60 days | Packaging Details | Plywood Case |
| Material | MP35N | Density | 8.43 g/cm3 |
| Melt Point | 1440 C | Rigid modulus | 80.7KN/mm2 |
| Modulus of elasticity | 234 KN/ mm2 | linear expansion coefficient | 12.8 a/10-6℃-1 |
| Standard | ASTM F562 AMS 5844 AMS 5845 | Heat Treatment | Solution Annealing, Aging treatment |
| Brand Name | JINXING | Model Number | MP35N alloy wire |
| Certification | ISO 9001 | Place of Origin | China |
| High Light | ni based superalloys ，nickel based superalloys | ||
MP35N alloy wire is a non-magnetic nickel cobalt chromium molybdenum alloy, which has unique ultra-high tensile strength (up to 300ksi [2068mpa], good ductility, toughness and very good corrosion resistance. In addition, the alloy also exhibits outstanding resistance to vulcanization, high temperature oxidation and hydrogen embrittlement. The unique properties of mp35n are obtained by work hardening, phase transformation and aging treatment. If the alloy is used under full work hardening conditions, the recommended temperature is 750 ° f (399 ° C) with an operating temperature of - 200-315 ° C.
3, Purpose of mp35n:
Mp35n alloy can be used for fasteners, springs, non-magnetic components and instrument components in medical, seawater, oil and gas wells, chemical and food processing environments.
4, Corrosion resistance:
Mp35n has good properties of anti sulfurization, high temperature oxidation, brittleness, salt spray and most mineral acids. The alloy has the ability to resist stress corrosion cracking under severe environment and high strength. The alloy also has high resistance to local corrosion, such as pitting and crevice corrosion.
5, Room temperature strength:
The yield strength of mp35n can reach 1999 MPa
MP35 N wire specification Φ 0.03m/m ～ Φ 12m / M delivery status: spring hard wire (tensile strength ≥ 1400MPa), acid white / hydrogen soft wire, fine wire delivery, round steel (hot rolling or solid solution delivery)
Characteristics of MP35N alloy:
·
Chemical composition:
| C % | Si % | Mn % | Cr % | Ni % | Fe % | Ti % | Mo % | OTHERS % |
| max. 0.02 | max. 0.15 | max. 0.15 | 20.00 | 35.00 | max. 1.00 | max. 1.00 | 10.0 | Co = rest. |
MP35N Physical propertie
| Density g/cm3 | Melt Point ℃ | Thermal conductivity λ/(W/m•℃) | Specific heat capacity J/kg•℃ | Rigid modulus KN/mm2 | Modulus of elasticity KN/mm2 | Resistivity μΩ•m | linear expansion coefficient a/10-6℃-1 |
| 8.43 | 1440 | 80.7 | 234 | 12.8 |
The minimum mechanical properties of MP35N alloy at room temperature:
MP35N Alloy | Tensile strength Rm N/mm2 | Yield strength RP0.2N/mm2 | Elongation A5 % | Hardness HB |
| Solution treatment | 800-1000 | |||
| Aging treatment | 1900-2200 |
the microstructure, monotonic, and cyclic response of as drawn ~100 μm diameter MP35N low-Ti alloy wire were presented and discussed. In this sequel paper, the effects of annealing the same cold-drawn wire on microstructure and mechanical properties are examined. Specifically, segments of the wire were annealed for 1 h at 973 K, 1023 K, 1073 K, 1123 K and 1173 K in a vacuum furnace. .
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter,Seller,Other
Year Established:
2007
Total Annual:
5,000,000-10,000,000
Employee Number:
10~25
Ecer Certification：
Site Member
JINXING MATECH is a research and development, production, processing and sales of integrated, comprehensive refractory metal, precious metal material manufacturer.JINXING MATECH is an expert provider on the metal solution. Especially on the products such as Tungsten , Tungsten copper , Titanium ... JINXING MATECH is a research and development, production, processing and sales of integrated, comprehensive refractory metal, precious metal material manufacturer.JINXING MATECH is an expert provider on the metal solution. Especially on the products such as Tungsten , Tungsten copper , Titanium ...
Get in touch with us
Leave a Message, we will call you back quickly!