Large Stone Breaker Rock Splitter For Excavator Mounted

Product Specification

Introducing our Large Stone Breaker Rock Splitter for Excavator Mounted. This powerful rock splitter boasts impressive features, including its ability to be mounted from a crane or normal excavator for open pits or shafts. It can also be mounted on a specialized carrier for horizontal tunneling.

With increased output pressure from the excavator's supercharger, the driving oil cylinder generates the necessary driving force. The hydraulic oil is then transported to the oil cylinder pipe in the airborne splitting machine through the excavator. The ultra-huge rock splitter in the splitting machine is controlled to push and expand, generating the necessary splitting force on the object.

To ensure the longevity and proper usage of our ultra-large rock splitters quarry, we urge our customers to observe the following guidelines strictly:

1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division. Hole depth requirements: splitter front end of the block length + 900mm or more, for example, split block length.

We understand the importance of safely and efficiently breaking large stones, and our Large Stone Breaker Rock Splitter for Excavator Mounted is the perfect solution for your mining or construction needs.

Description

The huge rock splitter can be mounted from a crane or a normal excavator for open pits or shafts or mounted on a specialized carrier for horizontal tunneling.
After the output pressure of the excavator is increased by the supercharger, the driving oil cylinder generates driving force, and the hydraulic oil is transported to the oil cylinder pipe in the airborne splitting machine through the excavator, and the ultra-huge rock splitter of the splitting machine controlled to push and expand, generate the splitting force on the object.

Precaution of operating ultra-large rock splitter

For your better use of our ultra-large rock splitters quarry to avoid undue failure of the hydraulic splitting machine, please be sure to observe the following when using the splitting machine and strictly observe:

1. After the hole depth reaches the standard, the splitter can be inserted into the hole for division;
(Hole depth requirements: splitter front end of the block length + 900mm or more, for example, split block length 600mm, then you must drill more than 1500mm holes can be used before the split machine)
2. Each splitter splits a certain grease after splitting 3-5 holes to reduce the friction between the wedge and the splitter;
3. Do not use the splitter gun as a crowbar to use.

Entire Service

We would provide customers with a one-year warranty, during processing, if customers have any problems with installation and use, we have professionals to provide online text, voice, or video communication services for them.

FAQ:
Q1: Whether the rig is used for rock holes or soil holes?
A1: Equipped with different drill bits according to the application object. Rock drilling rigs are equipped with round steel drill impact hammers and rock drill bits. The soil drilling rigs require a twist drill pipe and a three-blade drill bit.

Q2: How much tonnage can a bridge jack lift??
A2: The range is from 50 to 1000 tons, depending on the application needs we have the right choice for you.

Q3: How many meters is the connection between the jack and the oil pump?
A3: The factory standard is two meters. If you need longer, we will make it for you.

Q4: What is the difference between the hydraulic oil pump?
A4: For the tension jack, it is 50 MPa 3 kW oil pump and 60 MPa 4 kW oil pump.

Q5: What kind of packages does a set of anchors have?
A5: Anchor ring, clip, anchor pad, spiral rib.

Q6: Which payment term can you accept?
A6: 100% T/T( Decide according to actual situation)

Q7: How long is the machine warranty?
A7: One year for the machine and provide technical support according to your needs.

Q8: How long will it take to arrange production?
A8: we can deliver the normal goods within 7-15 days. Other nonstandard electrical items we will deliver within 25-30 days.

Q9: Which trade term can you accept?
A9: Available trade terms: FOB, CIF, CFR, EXW, etc.

Q10: Do you provide samples? Is it free or extra?
A10: Yes, we could offer you the sample machine. But it's not free. You need to pay for the sample and the cost of the freight.

Q11: What are your terms of payment?
A11: We accept T/T, Western Union, Money Gram, Paypal, L/C, etc.