Seat Driven Floor Grinder Machine Concrete Trowel Cement Floor Polishing Machine

The working principle of Concrete Trowel Seat-Driven Machine​

The water spray pipe can be made of plastic pipe, and the tail of the water spray pipe is connected to an atomizing nozzle. The atomizing nozzle can include a spray head. Using the atomizing nozzle, atomized water can be sprayed, which can humidify the wall and make the wall humid. evenly. The water pump control handle and the motor control handle are provided with fixed rods, the fixed rods are hollow, and the fixed rods can be provided with a water pump switch or a motor controller. The motor controller can be connected with a leakage protector, the top of the casing can be provided with a vertical level, which ensures that the wall after troweling is perpendicular to the ground, and the casing can be movably connected to the motor, and the casing and the motor can pass through. Bolted. The shell can be provided with a jet port, which is connected to the air pump or fan through a plastic pipe. The ejected gas can accelerate the volatilization of water, which is conducive to the rapid drying and smoothing of the wall. The jet is used for drying, and the water is used for humidification. Convenient and effective. The mounting cover may be made of metallic material. The motor controller can be connected to the controller.

The controller can be connected with a humidity detection device. When it is detected that the humidity of the wall is lower than the rated value, the water spray pipe automatically sprays water. When the humidity of the wall is detected to be higher than the rated value, the air jet port automatically sprays water. The air jet port can be set. There is a one-way valve, and a stop valve can be set on the spray pipe. The wall troweling machine described herein includes a cover, a disc, a casing, a motor, a blocking block, and a blade. The disc is the main component, the blocking block is arranged on the upper surface of the disc, and the cutter is provided upward on the disc. It consists of a blade, the disc is clamped with the tool, the blade is movably connected to form a tool, the tool is connected upward with a motor, the motor, and the tool are connected through a transmission shaft, and the motor is provided with a casing outward, which is characterized by the water pump control handle, water pump switch, fog spray nozzles, atomizing nozzles, hoses, water pumps, kettles, motor controllers, motor control handles and lithium batteries.

The advantages of Concrete Trowel Seat-Driven Machine​

1. The walk-behind trowel requires people to hold the machine for construction, and it is very tiring during the operation. This car trowel can sit and open, the handle is concentrated, the ergonomic design is in line with the ergonomic design, and the seat can be installed. Effectively improve the comfort of work and reduce the labor intensity of workers.
2. Equipped with a high-horsepower engine, the quality of the engine is guaranteed, which makes it easier to start the troweling machine, and greatly improves the efficiency of the finishing and troweling operation of the equipment. The whole machine runs with strong power. Stable during light work.
3. Adopting the design of a double trowel, the area of finishing and troweling operation has been increased, and the efficiency of harsh construction work has been improved. Equipped with transfer wheels, it is convenient for workers to move and transfer.
Using a car trowel for construction when finishing and leveling the concrete floor can bring great convenience to the majority of workers and reduce their own labor burden.

Maintenance of Concrete Trowel Seat-Driven Machine​

In the daily use of the car trowel, attention should be paid to reasonable and effective maintenance, and regular maintenance and maintenance will help to maintain the equipment in good operating condition and can have excellent performance. With proper maintenance, your trowel will last longer.
1. Check and replace the engine oil of the trowel on a regular basis to check whether the engine oil is sufficient. If the engine oil is insufficient, it should be replenished in time. When replacing the engine oil, be careful not to mix old and new oil to prevent oil from appearing. spoiled.
2. Add lubricating oil to the bearing parts of the troweling machine to ensure that the machine can get a good lubrication effect. Reasonable filling of lubricating oil can reduce the friction and wear between the various parts, and reduce the occurrence of the failure rate of the fuselage. Extends the life of components.
3. Before the construction work of the car trowel, comprehensively check whether the various parts of the fuselage are properly connected, and tighten the loose parts according to the specified gaps to prevent the loose parts from loosening during operation, and timely repair the aging and severely worn parts. to replace.