3600rpm Indoor Outdoor Floor Grinder Machine Ride On Concrete Trowel Machine

The working principle of Concrete Trowel Seat-Driven Machine​

1. Before starting, check the operating parts of the machine for abnormal conditions to ensure the reliability of operation;
2. Confirm that the switch of the main brake is in the closed state, do not step on the accelerator when starting, pull the damper to start, and return the damper after the machine starts;

3. Start the trowel, and hold the joystick tightly to keep the fuselage balanced;

4. The trowel must be stabilized when the trowel is working, and the direction should be adjusted in time when working on the floor to keep the operation of the machine under control;

5. During the construction process, pay attention to rough grinding first and then fine grinding. After rough grinding the bottom grinding disc, remove the grinding disc when the ground is suitable for fine grinding, and then use a spatula to finely grind it.

The advantages of Concrete Trowel Seat-Driven Machine​

Using gasoline power, it is easy to start, and one machine can be equipped with two discs for ride-on operation. One person can easily operate it; it is an ideal machine for concrete construction. The infinitely variable steering is flexible and convenient, and the working width can reach two meters, which not only saves labor but also improves construction efficiency. The surface after machine construction will be smoother and smoother, and at the same time, the compactness and wear resistance of the concrete surface can be greatly improved. Ride-on grinder + single-disc trowel is widely used for slurrying, smoothing, and troweling concrete surfaces in high-standard workshops, warehouses, parking lots, squares, airports, and frame buildings.

Maintenance of Concrete Trowel Seat-Driven Machine​
In the daily use of the car trowel, attention should be paid to reasonable and effective maintenance, and regular maintenance and maintenance will help to maintain the equipment in good operating condition and can have excellent performance. With proper maintenance, your trowel will last longer.
1. Check and replace the engine oil of the trowel on a regular basis to check whether the engine oil is sufficient. If the engine oil is insufficient, it should be replenished in time. When replacing the engine oil, be careful not to mix old and new oil to prevent oil from appearing. spoiled.
2. Add lubricating oil to the bearing parts of the troweling machine to ensure that the machine can get a good lubrication effect. Reasonable filling of lubricating oil can reduce the friction and wear between the various parts, and reduce the occurrence of the failure rate of the fuselage. Extends the life of components.
3. Before the construction work of the car trowel, comprehensively check whether the various parts of the fuselage are properly connected, and tighten the loose parts according to the specified gaps to prevent the loose parts from loosening during operation, and timely repair the aging and severely worn parts. to replace.