Shenzhen ZTW Model Science&Technology Co.,ltd
| Continuous Current | 25A |
| Weight | 101g |
| Burst Current | 120A |
| Size | 80*34*19.5mm |
| Model Name | DX 60A ESC BLDC 14S |
| Input Voltage | 6-14S LiPo |
View Detail Information
Explore similar products
ZTW 300 Amp ESC DX BLDC ESC 6S-28S ZTW ESC 300A Ultra High Power
6S-14S LiPo DX 80A ESC BLDC Multirotor ESC For Industrial UAV
High Current ZTW DX 100A BLDC ESC 6S-14S EVTOL RC Speed Controller
DX BLDC ZTW 150A ESC 6S-14S ESC UAV With Shielded Signal Cable
Product Specification
| Continuous Current | 25A | Weight | 101g |
| Burst Current | 120A | Size | 80*34*19.5mm |
| Model Name | DX 60A ESC BLDC 14S | Input Voltage | 6-14S LiPo |
| High Light | DX BLDC ZTW 60A ESC ，ZTW 60A ESC 6S ，14S Electronic Speed Controller | ||
DX 60A ESC BLDC 6-14S HV Electronic Speed Controller. Support 6-14S LiPo with Telemetry & CAN Bus Designed for heavy lift drone, VTOL, multirotor & industrial UAV. Stable & low temperature
Entry-Level Industrial Power in a Compact Frame
The DX 60A is the gateway to ZTW's DX industrial BLDC ESC line, engineered for lightweight commercial UAVs, inspection drones, and small eVTOL platforms that demand reliable brushless motor control without excess weight.
25A Continuous / 60A Burst Current
Rated for 25A sustained operation with 60A peak headroom, this ESC comfortably drives motors on 6-14S LiPo packs — ideal for medium-thrust multirotor and fixed-wing commercial airframes where efficiency and thermal stability matter.
Ultra-Compact 101g Design
At just 80×34×19.5mm and 101g, the DX 60A fits tight ESC bays on compact airframes. 14-gauge power and motor wires keep resistance low while maintaining a clean, install-friendly layout.
170MHz High-Speed Processing
A 170MHz MCU delivers rapid throttle response and precise commutation, ensuring smooth motor control across the full RPM range — critical for stable hover and efficient cruise in commercial operations.
UART & CAN Bus with Telemetry
Native UART and CAN bus support (customizable) enables real-time telemetry integration with flight controllers, allowing operators to monitor ESC health, current draw, and temperature during missions.
Field-Upgradable Firmware
Upgrade firmware in the field via the communication interface, ensuring ESCs stay current with the latest performance refinements and feature updates without hardware replacement.
Splash-Proof for Field Operations
Splash-proof construction protects against rain, humidity, and dust — essential for industrial UAVs operating in unpredictable outdoor environments.
| Specifications | DX 60A BLDC | DX 80A BLDC | DX 100A BLDC | DX 150A BLDC | DX 200A BLDC 14S | DX 300A BLDC 28S |
|---|---|---|---|---|---|---|
| Continuous Current | 25A | 40A | 50A | 70A | 100A | 150A |
| Burst Current | 60A | 80A | 100A | 150A | 200A | 300A |
| Input Voltage | 6-14S LiPo | 6-14S LiPo | 6-14S LiPo | 6-14S LiPo | 6-14S LiPo | 6-28S LiPo |
| BEC Output | None (OPTO) | None (OPTO) | None (OPTO) | None (OPTO) | None (OPTO) | None (OPTO) |
| CPU Frequency | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz |
| Telemetry | Supported | Supported | Supported | Supported | Supported | Supported |
| Communication | UART & CAN (Customizable) | UART & CAN (Customizable) | UART & CAN (Customizable) | UART & CAN (Customizable) | UART & CAN (Customizable) | UART & CAN (Customizable) |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported | Supported |
| Waterproof Rating | Splash-Proof | Splash-Proof | Splash-Proof | Splash-Proof | Splash-Proof | Splash-Proof |
| Power Wire | 14AWG | 12AWG | 12AWG | 10AWG | 8AWG | 8AWG |
| Motor Wire | 14AWG | 12AWG | 12AWG | 10AWG | 8AWG | 8AWG |
| Signal Cable | 30AWG JR | 30AWG JR | 60AWG JR | 26AWG Shielded | 26AWG Shielded | 26AWG Shielded |
| Size (L×W×H) | 80×34×19.5mm | 80×34×19.5mm | 94×38×25mm | 110×53×30mm | 105×58×30mm | 188×95×39.5mm |
| Weight | 103g | 114g | 158g | 368g | 387g | 1119g |
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
>20 Million
Employee Number:
100~500
Ecer Certification：
Verified Supplier
About ZTW Shenzhen ZTW Model Science & Technology Co., Ltd. is a high-tech enterprise specializing in the R&D, manufacturing, and sales of brushless electronic speed controllers (ESCs) and propulsion systems for RC models, UAVs, and industrial applications. Since our founding in 2007, we hav... About ZTW Shenzhen ZTW Model Science & Technology Co., Ltd. is a high-tech enterprise specializing in the R&D, manufacturing, and sales of brushless electronic speed controllers (ESCs) and propulsion systems for RC models, UAVs, and industrial applications. Since our founding in 2007, we hav...
Get in touch with us
Leave a Message, we will call you back quickly!