Shenzhen ZTW Model Science&Technology Co.,ltd
| Programming Way | LCD Program Card G2/Android&IOS APP |
| Continuous/ Burst Current | 85A/160A |
| Size | 70*36*21mm |
| Weight | 93g |
| Input Voltage | 3-6S LiPo |
| BEC Output | 6-12V Adjustable /10A |
| Product Name | XDFly HPRO 85A SBEC |
View Detail Information
Explore similar products
HV SBEC XDFly 300A Anti Ignition 6-12V BEC 700-800 RC Heli ESC
XDFly 195A HV SBEC 32 Bit G4 6-14S ESC For 600-700 RC Helicopter
HPRO XDFly 155A SBEC G4 3-8S ESC With RGB F3C And 2m F3A Fixed Wing ESC
125A XDFly ESC 32 Bit G4 3-8S Temp Controlled Fan 500-550 RC Helicopter ESC
Product Specification
| Programming Way | LCD Program Card G2/Android&IOS APP | Continuous/ Burst Current | 85A/160A |
| Size | 70*36*21mm | Weight | 93g |
| Input Voltage | 3-6S LiPo | BEC Output | 6-12V Adjustable /10A |
| Product Name | XDFly HPRO 85A SBEC | ||
| High Light | 6S G4 XDFly 85A ，XDFly 85A SBEC 32 Bit ，420 RC Helicopter ESC | ||
XDFly HPRO 85A SBEC 32-Bit G4 ESC 3-6S with 6-12V BEC for 380-420 RC Helicopter, EDF and Fixed-Wing 3D
85A/160A for 420 Helis & High-Power Fixed-Wing
The HPRO 85A delivers 85A continuous and 160A burst — substantial headroom over the 130A burst typical of this class — using new-generation MOSFETs that run cooler and handle instantaneous current spikes with ease. Ideal for 380-420 helis, .70-class fixed-wing 3D, and 75mm EDF jets.
Lighter Than Comparable ESCs
At just 93g and 70×36×21mm, the HPRO 85A is significantly lighter than same-class competitors (typically 105-110g), reducing all-up weight on aerobatic airframes where every gram affects flight performance.
32-Bit G4 Precision
The 170MHz G4 processor delivers efficient processing and accurate motor output, with smooth startup and linear throttle response that pilots can feel in both heli collective management and fixed-wing 3D sequences.
6-12V Wide-Range SBEC
The 6-12V adjustable SBEC (10A continuous, 0.2V steps) powers HV servos and gyro/flybarless controllers directly, eliminating the weight and complexity of an external BEC.
Vented Case for Superior Cooling
The unique HPRO housing with side air vents and optimized internal airflow increases heat dissipation area, keeping MOSFET temperatures low during sustained high-power aerobatics.
XT60 & 3.5mm Bullets Pre-Installed
Amass XT60 battery connector and 3.5mm gold bullets come pre-soldered for fast, reliable installation.
Full Telemetry Ecosystem & Protections
Telemetry for VBar VBCt/E, Rotorflight2, SBUS2, Jeti, Brain, and iKon. APP/LCD G2 programming, firmware upgrades, heli governor, fixed-wing mode, ARTime autorotation restart, self-check, and seven protection layers.
| Specifications | H-Pro 35A SBEC | H-Pro 65A SBEC | H-Pro 85A SBEC | H-Pro 125A SBEC | H-Pro 155A SBEC | H-Pro 195A HV SBEC | H-Pro 300A HV SBEC |
|---|---|---|---|---|---|---|---|
| Continuous Current | 35A | 65A | 85A | 125A | 155A | 195A | 300A |
| Burst Current | 55A | 130A | 160A | 200A | 260A | 260A | 400A |
| Input Voltage | 3-6S LiPo | 3-6S LiPo | 3-6S LiPo | 3-8S LiPo | 3-8S LiPo | 6-14S LiPo | 6-14S LiPo |
| BEC Output | 6-12V Adj. / 8A | 6-12V Adj. / 10A | 6-12V Adj. / 10A | 6-12V Adj. / 10A | 6-12V Adj. / 10A | 6-12V Adj. / 10A | 6-12V Adj. / 10A |
| CPU Frequency | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz | 32-bit / 170MHz |
| Telemetry | Supported | Supported | Supported | Supported | Supported | Supported | Supported |
| Governor Mode | Supported | Supported | Supported | Supported | Supported | Supported | Supported |
| Anti-Ignition | — | — | — | — | — | — | Supported |
| Cooling Fan | — | — | — | Auto Temp Control | Auto Temp Control | Auto Temp Control | Auto Temp Control |
| RGB Light | — | — | — | Supported | Supported | Supported | Supported |
| Programming | LCD Card / iOS & Android App | LCD Card G2 / App | LCD Card G2 / App | LCD Card G2 / App | LCD Card G2 / App | LCD Card G2 / App | LCD Card G2 / App |
| Firmware Upgrade | Supported | Supported | Supported | Supported | Supported | Supported | Supported |
| Power Wire | 16AWG | 14AWG | 12AWG | 10AWG | 10AWG | 8AWG | 8AWG |
| Motor Wire | 18AWG | 14AWG | 12AWG | 10AWG | 10AWG | 10AWG | 10AWG |
| Battery Plug | None (Solder) | XT60 (Amass) | XT60 (Amass) | None (Solder) | None (Solder) | None (Solder) | None (Solder) |
| Motor Bullet | 3.5mm Gold | 3.5mm Gold | 3.5mm Gold | 4.0mm Gold | 4.0mm Gold | None (Solder) | None (Solder) |
| Size (L×W×H) | 48×25×16mm | 60×36×19mm | 70×36×21mm | 90×43×36mm | 90×43×36mm | 103.5×48×37mm | 95×57×42mm |
| Weight | 42g | 63g | 93g | 158g | 158g | 223g | 302g |
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
>20 Million
Employee Number:
100~500
Ecer Certification：
Verified Supplier
About ZTW Shenzhen ZTW Model Science & Technology Co., Ltd. is a high-tech enterprise specializing in the R&D, manufacturing, and sales of brushless electronic speed controllers (ESCs) and propulsion systems for RC models, UAVs, and industrial applications. Since our founding in 2007, we hav... About ZTW Shenzhen ZTW Model Science & Technology Co., Ltd. is a high-tech enterprise specializing in the R&D, manufacturing, and sales of brushless electronic speed controllers (ESCs) and propulsion systems for RC models, UAVs, and industrial applications. Since our founding in 2007, we hav...
Get in touch with us
Leave a Message, we will call you back quickly!