Shanghai Bestcomp Compressor Co., Ltd
| Air capacity（m3/min） | 45.0 |
| Payment Terms | TT/LC,Western Union,D/P,D/A |
| Power | 8.8KW |
| Working Pressure | 0.6~1.0MPa |
| Inlet oil content | ≤0.01ppm |
| Supply Ability | 2,000-3,000 per month |
| Pressure dew point | -20℃~-40℃ |
| Delivery Time | 5-15 days |
| Purge air | <=12~15% |
| Packaging Details | wooden case |
| Model Number | HDR-350XF |
| Place of Origin | made in China |
| Certification | ISO、CE、TUV |
| Brand Name | AIRERA |
View Detail Information
Explore similar products
10.7Nm3/min Energy-Efficient Heatless Desiccant Air Dryer with Low Air
35Nm3/min No Electric Heating Means More Energy Savings | Heatless Regenerative
3.8Nm3/min Heatless Regenerative Adsorption Dryer – Stable Dew Point at -40°C;
55Nm3/min No Electric Heating Means More Energy Savings | Heatless Regenerative
Product Specification
| Air capacity（m3/min） | 45.0 | Payment Terms | TT/LC,Western Union,D/P,D/A |
| Power | 8.8KW | Working Pressure | 0.6~1.0MPa |
| Inlet oil content | ≤0.01ppm | Supply Ability | 2,000-3,000 per month |
| Pressure dew point | -20℃~-40℃ | Delivery Time | 5-15 days |
| Purge air | <=12~15% | Packaging Details | wooden case |
| Model Number | HDR-350XF | Place of Origin | made in China |
| Certification | ISO、CE、TUV | Brand Name | AIRERA |
| High Light | 65Nm3/min molecular sieve desiccant air dryer ，non-thermal dryer low failure rate ，powder-resistant desiccant air dryer | ||
Engineered for ultra-large modern industrial air compressor stations, this AIRERA 65Nm³/min heatless regenerative desiccant dryer serves as heavy-duty, hyper-stable equipment for deep dehumidification. The core of the dual towers is filled with industrial-grade premium molecular sieves, possessing exceptional resistance to physical powdering and trace oil contamination, completely eliminating the severe risks of desiccant crushing and fluidization common in traditional high-flow units. Relying on a pure physical heatless pressure swing adsorption cycle, the streamlined architecture thoroughly abandons complex, vulnerable electrical heating elements, achieving an exceptionally low system failure rate and near-zero daily maintenance costs. Coupled with AIRERA's scientific large-diameter, low-resistance engineering, it delivers a continuous, fully automated supply of premium compressed air with a stable ultra-low dew point, forging a long-lasting safety barrier for plant-wide automated piping networks.
Energy-Saving Purge Design
With purge air controlled within only 12-15%, it cuts compressed air waste drastically, bringing remarkable long-term operational savings for Middle East factories.
Steady Dew Point Performance
Maintains a stable pressure dew point between -20°C to -40°C even under 45°C hot inlet air, fully protecting downstream pneumatic components from moisture damage.
Wide Working Pressure Adaptability
Adapts seamlessly to 0.6-1.0Mpa working pressure, matching local power supply and pipeline conditions perfectly for hassle-free installation and operation.
| ITEM | UNIT | MODEL HDR-450XF |
|---|---|---|
| Capacity | Nm³/min | 65.0 |
| Motor | Power(kw) | 13 |
| Voltage | V | 380 |
| connection |
DN125 |
|
| Dimension | L×W×H in mm | 1900×700×3070 |
| Weight | kg | 3100 |
| Purge air | <=12~15% | |
| Working pressure | Mpa | 0.6~1.0 |
| Inlet oil content | ppm | <=0.01 |
| Pressure dew point | ℃ | -20℃~-40℃ |
| Desiccant | Activated aluminum or Molecular siere | |
| Working periods | T=4~20Minutes | |
| Inlet temperature | 0℃~45℃ |
Under the continuous impact of a massive 65Nm³/min air load, traditional dryers are highly susceptible to localized airflow channeling (the tunnel effect), leading to dew point degradation. How does AIRERA ensure uniform contact between the airflow and the anti-powdering molecular sieves?
If an ultra-large airflow of 65Nm³/min rushes directly into the vessel, it can easily flush "tunnels" through the desiccant bed, causing air to pass through without full moisture extraction. To prevent this, AIRERA integrates a proprietary multi-layer progressive diverging mesh and a stainless steel star-shaped flow distribution matrix at the vessel inlet. This architecture instantly and uniformly disperses the concentrated high-pressure stream, guiding the air upward through the molecular sieve bed at an optimized, uniform velocity. Because the gas distribution is perfectly symmetrical, structural mechanical stresses are evenly spread, completely eliminating desiccant impact powdering caused by localized high-velocity air streams while ensuring 100% of the molecular sieves exert their full moisture-affinity potential to deliver premium ultra-dry air.
Although premium pre-filters are installed at major air stations, trace oil mist carryover is still inevitable. How does this dryer's desiccant achieve "Oil Contamination Resistance" without easily succumbing to oil poisoning and failure?
Once traditional desiccant encounters trace oil mist, its micropores are instantly sealed (known as oil poisoning), causing a total loss of moisture affinity. In this 65Nm³/min heavy-duty model, AIRERA utilizes a composite multi-gradient bed architecture, where a specialized macro-porous protective activated alumina layer is layered at the bottom inlet zone to serve as a "sacrificial interception zone" dedicated to trapping escaping trace oil mists and heavy moisture. Meanwhile, the premium oil-resistant molecular sieves in the core adsorption zone feature a specialized surface modification layer whose micropores maintain a highly selective affinity for water molecules while naturally repelling oil tracking, fundamentally ensuring the equipment maintains an extended service lifespan under complex industrial air conditions.
In large-scale industrial operations, high system complexity inevitably inflates management costs. Heated dryers contain dozens of high-value, vulnerable components such as heating elements, high-temperature contactors, SCR voltage regulation modules, and thermal sensors, which not only degrade under high temperatures but also lock up significant factory capital in spare parts inventory. The AIRERA 65Nm³/min heatless dryer achieves a streamlined physical regeneration architecture, leaving the entire system completely free of high-risk, vulnerable thermal-electrical wear parts except for standard pneumatic valve seals and a PLC unit. Consequently, massive industrial facilities no longer need to stockpile complex high-temperature electrical spares in their warehouses, and operational engineers only need to master straightforward valve maintenance techniques, comprehensively simplifying equipment asset management workflows for major production hubs.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
1981
Total Annual:
13200000-15000000
Employee Number:
115~1040
Ecer Certification：
Verified Supplier
Since 1981, Airera has been dedicated to the development & production of compressors(not AC compressors) for over 4 decades, it has overseas R&D centers and provincial enterprise technology centers, 106 R&D technicians, 12 third-generation Rotorcomp patented lines, and cooperates with Ge... Since 1981, Airera has been dedicated to the development & production of compressors(not AC compressors) for over 4 decades, it has overseas R&D centers and provincial enterprise technology centers, 106 R&D technicians, 12 third-generation Rotorcomp patented lines, and cooperates with Ge...
Get in touch with us
Leave a Message, we will call you back quickly!