4N0616013 4N0616013A Air Suspension Solenoid Valve Block For Audi A8D5 Audi

4N0616013 4N0616013A Air Suspension Solenoid Valve Block for Audi A8D5 Audi (E-tron) 2019+ Audi Q5 (FYB) 2017+

1. Product Introduction

4N0616013 / 4N0616013A is an original-equipment-grade dedicated air suspension distribution valve for Audi new high-end chassis, precisely compatible with Audi A8 D5, A6 C8 and Q5 B9 high-end models equipped with factory original air suspension. Serving as the air pressure control core of the new air suspension system, it is mainly responsible for four-wheel independent precise air pressure distribution, system pressure stabilization and retention, intelligent vehicle body height adjustment, and automatic pipeline pressure balance. It manages the air inflation, pressure retention and pressure relief logic of the four air springs, maintaining consistent vehicle body level, stable chassis comfort and zero-fault operation of the air suspension system for new Audi high-end vehicles.

The original air suspension distribution valve of Audi new 4N/4K chassis operates under harsh chassis conditions including long-term high-frequency high pressure, alternating seasonal temperature differences and humid dust erosion. After years of use, it is prone to common faults such as slow solenoid valve response, slight valve core sticking, carbon deposition blockage, aging and loose sealing rubber rings, micro valve pressure relief, reduced pressure retention capacity and unbalanced four-wheel air pressure distribution. Typical vehicle faults include single-side/four-wheel body sagging after static parking, unbalanced left-right body height, frequent start-stop of the air suspension compressor, slow body lifting speed, lifting stuttering, body shaking and tilting during high-speed driving, dashboard air suspension warning light on, and system pressure leakage and abnormal pressure retention fault codes.

This new model dedicated distribution valve is 1:1 precisely replicated according to original factory data of 4N0616013 and 4N0616013A. The valve flow channel aperture, solenoid switching frequency, high-pressure resistance grade, electronic control signal parameters, pipeline interface dimensions and plug pin definitions fully comply with OEM standards. Adopting new model dedicated high-strength precision aluminum alloy valve body, high and low temperature resistant high-pressure fluororubber sealing kit and anti-interference rust-proof precision electronic valve core, it features sensitive response, accurate shunting, stable pressure stabilization, aging resistance, corrosion resistance and zero air leakage. It supports non-destructive in-situ direct replacement without wiring modification, drilling or professional programming, perfectly compatible with the original Audi new Airmatic intelligent air suspension control system. It thoroughly solves high-frequency common faults of new Audi A8 D5, A6 C8 and Q5 B9 including air suspension body sagging, pressure leakage, body tilting, height imbalance, overworked compressor and abnormal lifting with an ultra-low rework rate, being a must-selling essential part for new model auto repair replacement, parts wholesale and cross-border export.

• ✅ 1:1 OEM precise replication, perfectly matching Audi new D5/C8/B9 chassis air suspension models with zero deviation in flow channel, hole position and electronic signal
• ✅ Solves classic new Audi high-end air suspension faults: static body sagging, body tilting, pressure leakage, frequent compressor operation and system alarm
• ✅ New model dedicated high-pressure valve structure, anti-carbon deposition, anti-sticking and high/low temperature resistant, maintaining stable leak-free pressure under long-term high-pressure operation
• ✅ Universal for all vehicle positions and multiple models with single stock specification, extremely low inventory pressure
• ✅ Non-destructive bolt-on installation, no modification or coding required, only code clearing and leak test for nearly 100% installation success rate
• ✅ Restores four-wheel independent pressure stabilization and shunting function, corrects body level errors and recovers premium chassis comfort and stability of new Audi models

2. Custom Attributes (E-commerce Listing)

3. Compatible Vehicles

1. Audi A8L D5 (4N): All air suspension versions (2019–2026)
2. Audi A6L C8 (4K): All air suspension versions (2019–2026)
3. Audi Q5 / SQ5 B9: All air suspension versions (2019–2026)
4. Audi A6 Avant: Corresponding high-end air suspension models

4. Interchangeable OE Numbers

5. FAQ

A: Completely universal. 4N0616013A is a factory upgraded iterative version replacing the old 4N0616013, with fully consistent dimensions, functions, electronic control parameters and compatible models for free interchangeable installation.

A: No position limitation, universal for all A8D5/A6C8/Q5B9 air suspension models, featuring ultra-simple inventory management and wide compatibility.

A: No. This part is exclusively applicable to new high-end models with factory-built air suspension system. Mechanical chassis has no matching air suspension pipelines, control modules and electronic control logic, resulting in incompatibility.

A: Not universal. This valve is exclusive for new 2019+ D5/C8/B9 chassis. Old chassis has completely different valve structure, electronic control procedures and pipeline layout and cannot be mixed.

A: No programming or coding required. After in-situ replacement, exhaust pipeline air, complete air tightness test, clear fault codes and calibrate body height for normal use, the vehicle system will automatically identify and adapt.

A: Replacement is recommended for vehicle static sagging, single-side low body height, unbalanced left-right height, continuous compressor operation, slow and stuttering lifting, air suspension warning light and system pressure relief/retention faults. These problems are mainly caused by new model valve sticking and sealing aging failure, which can be completely solved by replacing the new assembly.

6. Custom Service

1. OEM & Private Label Customization: Support custom logo printing, neutral no-label export packaging and customized color boxes, suitable for cross-border platforms including Amazon, eBay, AliExpress.
2. Bulk Supply Service: Long-term sufficient stock of 4N0616013 / 4N0616013A new air suspension distribution valves, supporting large-batch wholesale and full-container export orders with stable supply, fast delivery and significant price advantages.
3. Complete Air Suspension Parts Supply: One-stop procurement of full Audi new D5/C8/B9 air suspension accessories, including air compressor, dryer, air filter, front/rear air spring, height sensor, shock absorber assembly and repair kit.
4. E-commerce Material Support: Provide real product photos, detailed close-up images, compatibility parameter sheets and installation reference materials for store listing, short video promotion and store decoration.