Foshan Henghui Aluminum Innovation International Trade Co., Ltd.
| Supply Ability | 20 sets/ year |
| Maximum natrual gas consumption | Maximum 350N m³/hour (quick melting period) |
| Payment Terms | T/T,L/C |
| Melting period fuelconsumption | 65 m³ /ton of aluminum (continuous working to melt the scrap to 710℃ |
| Delivery Time | 60 days |
| Burner load adjustment | PLC adjustment |
| Tonnage | 20T |
| Burner type | Regenerative burner |
| Maximum scrap loading | 22T |
| Packaging Details | Standard export packaging (carbon box, pallet, film) |
| Scrap type | loose or baled aluminum scrap, UBC, automobile engine |
| Fuel | Natural gas 8400kcal/m³ |
| Brand Name | Bolv |
| Model Number | 20T |
| Place of Origin | China |
View Detail Information
Explore similar products
20 Ton Aluminum Melting Furnace Tilting Type Aluminium Scrap Melting Machine
10 Ton Aluminum Scrap Melting Furnace PLC Adjustment Aluminium Melting Machine
Energy Saving Aluminum Melting Furnace Regenerative Scrap Melting Furnace 10
Air Entrapment and Slag Carryover During Molten Aluminum Pouring: Evaluating
Product Specification
| Supply Ability | 20 sets/ year | Maximum natrual gas consumption | Maximum 350N m³/hour (quick melting period) |
| Payment Terms | T/T,L/C | Melting period fuelconsumption | 65 m³ /ton of aluminum (continuous working to melt the scrap to 710℃ |
| Delivery Time | 60 days | Burner load adjustment | PLC adjustment |
| Tonnage | 20T | Burner type | Regenerative burner |
| Maximum scrap loading | 22T | Packaging Details | Standard export packaging (carbon box, pallet, film) |
| Scrap type | loose or baled aluminum scrap, UBC, automobile engine | Fuel | Natural gas 8400kcal/m³ |
| Brand Name | Bolv | Model Number | 20T |
| Place of Origin | China | ||
| High Light | molten aluminum transfer furnace ，aluminum melting furnace casting line ，reduce entrapment inclusion risks | ||
From Tilting Furnace to Casting Line: Managing Molten Aluminum Transfer to Reduce Entrapment and Inclusion Risks
In aluminum melting and casting, the transfer of molten metal from the furnace to downstream casting equipment is an important process stage. Flow disturbances, insufficient slag removal, and unsuitable transfer practices may increase the risk of inclusions or other defects in castings and aluminum billets. Discharge control should therefore be considered together with melting, melt treatment, and casting operations.
This hydraulic tilting furnace for aluminum melting uses a regenerative natural gas combustion system and is equipped with hydraulic tilting and PLC controls. It is designed for melting aluminum ingots, master alloy ingots, and returned scrap, with provisions for slag removal, sampling, composition adjustment, and melt temperature control. Tilting speed can be adjusted through a proportional valve according to casting speed, providing a control function for coordinating furnace discharge with the downstream casting line.
The furnace discharges molten aluminum by tilting the furnace body. According to the product documentation, a proportional valve allows the tilting speed to be adjusted to suit casting speed requirements. Appropriate operating settings can help manage discharge conditions and avoid unnecessary flow disturbances caused by unsuitable operation.
However, air entrapment and slag carryover are not determined by tilting speed alone. Skimming practices, transfer equipment, outlet design, and casting parameters also require consideration.
The furnace has two regenerative natural gas burners, each rated at 3,000 kW. The system alternates combustion and exhaust phases to recover heat from exhaust gas. The product document specifies a main exhaust temperature of no more than 200°C.
This is a documented design parameter, not a verified energy-saving percentage under every operating condition.
The furnace is intended for aluminum ingots, master alloy ingots, and returned scrap. Its process functions include skimming, refining, sampling, and melt temperature adjustment. Standardized melting and slag removal procedures can support inclusion-risk management, while actual melt cleanliness and final billet or casting quality must be verified through production controls and inspection.
| Parameter | Specification |
|---|---|
| Furnace type | Rectangular, single-chamber hydraulic tilting furnace |
| Combustion system | Regenerative natural gas |
| Capacity stated on page 2 | ≤17 tons |
| Charge amount stated on page 18 | 20 tons +10% |
| Melting rate | ≥4 t/h |
| Specific gas consumption during melting | ≤65 Nm³/t-Al |
| Burners | 2 × 3,000 kW |
| Natural gas consumption | ≤300 Nm³/h |
| Normal molten aluminum temperature | 690–760°C |
| Maximum furnace temperature | 1,200°C |
| Main exhaust temperature | ≤200°C |
| Hydraulic system design pressure | 16 MPa |
| Hydraulic oil tank capacity | 1,000 L |
| Tilting control | Proportional-valve adjustment coordinated with casting speed |
| Control system | PLC and human-machine interface |
| Power supply | 380 V, 50 Hz |
| Total installed electrical power | 43.5 kW |
For aluminum producers concerned about air entrapment, slag carryover, and inconsistent casting or billet quality, furnace selection should consider melting capacity, hydraulic tilting control, melt treatment, and integration with the casting line. The proportional-valve tilting system, regenerative natural gas combustion, and PLC controls provide relevant technical features for production planning. Actual effects on inclusion levels and product quality should be validated under site-specific operating conditions.
Company Details
Business Type:
Trading Company
Year Established:
2026
Total Annual:
10,000,000-50,000,000
Employee Number:
40~100
Ecer Certification：
Verified Supplier
As an outstanding provider of advanced solutions, Foshan Henghui Aluminum Innovation International Trade Co., Ltd. has been specializing in the research and development and production of aluminum melting and casting equipment for 20 years. With over technical professionals and senior engineers, we... As an outstanding provider of advanced solutions, Foshan Henghui Aluminum Innovation International Trade Co., Ltd. has been specializing in the research and development and production of aluminum melting and casting equipment for 20 years. With over technical professionals and senior engineers, we...
Get in touch with us
Leave a Message, we will call you back quickly!