Aquacells Membrane Technologies Co., Ltd.
| Maximum Pressure | 150 psi |
| Application | Pharmaceutical, biotech, and food & beverage industries |
| Water quality output | High purity water, resistivity > 15 MΩ·cm |
| Product name | Hot Water Sanitizable EDI Module |
| Electrical consumption | Low power consumption |
| Flow rate | Varies by model, typically 1-10 GPM |
| Connection type | Sanitary tri-clamp or threaded connections |
| Module type | EDI (Electrodeionization) |
| Sanitizationcycleduration | Typically 30-60 minutes |
| PH Range | 2-11 |
| Sanitizationmethod | Hot Water |
| Material construction | Sanitary-grade materials compatible with hot water |
| Installation orientation | Horizontal or vertical |
| Operatingtemperature | Up to 85 °C |
| Maintenance interval | Extended due to hot water sanitization capability |
| Certification | FDA，EU，CE，RoHS ，REACH |
| Model Number | EIMD-30HP |
| Place of Origin | China |
| Brand Name | Aquacells |
View Detail Information
Explore similar products
Product Specification
| Maximum Pressure | 150 psi | Application | Pharmaceutical, biotech, and food & beverage industries |
| Water quality output | High purity water, resistivity > 15 MΩ·cm | Product name | Hot Water Sanitizable EDI Module |
| Electrical consumption | Low power consumption | Flow rate | Varies by model, typically 1-10 GPM |
| Connection type | Sanitary tri-clamp or threaded connections | Module type | EDI (Electrodeionization) |
| Sanitizationcycleduration | Typically 30-60 minutes | PH Range | 2-11 |
| Sanitizationmethod | Hot Water | Material construction | Sanitary-grade materials compatible with hot water |
| Installation orientation | Horizontal or vertical | Operatingtemperature | Up to 85 °C |
| Maintenance interval | Extended due to hot water sanitization capability | Certification | FDA，EU，CE，RoHS ，REACH |
| Model Number | EIMD-30HP | Place of Origin | China |
| Brand Name | Aquacells | ||
| High Light | High Temp Resistant EDI Module ，EDI Module Chemical Free Regeneration | ||
The Aquacells EIMD-HP module is specifically engineered for hot water sanitization applications and is widely utilized in Pharmaceutical, biotechnology, and cosmetics industries. Constructed from high-temperature resistant materials to accommodate instantaneous heating and cooling requirements, this module delivers a constant flowrate of high-purity water without the need for chemical regeneration.
| Parameter | Specification |
|---|---|
| FCE (including CO2 and Silica) | < 45 µS/cm |
| Temperature | 5-45 ℃ (40-113 ℉) |
| Feed pressure | 1.4-7 bar (20-100 psi) |
| Total Chlorine (as CI2) | <0.05 ppm |
| Fe | <0.01 ppm |
| Mn | <0.01 ppm |
| S2- | <0.01 ppm |
| pH | 4-11 |
| Total Hardness (as CaCO3) | <1.0 ppm |
| Dissolved Organics (TOC as C) | <0.5 ppm |
| Silica (SiO2) | <1.0 ppm |
| Parameter | Performance |
|---|---|
| Typical Recovery | 90-95% |
| Maximum Feed Pressure | 7 bar (100 psi) |
| Maximum Feed Temperature | 45 ℃ (113 ℉) |
| Sanitization Temperature at 30 psi (2.0 bar) | 85 ℃ (185 ℉) |
| DC Voltage* | 0-600 V |
| DC Amperage | 0-10 A |
| Product Conductivity | <0.1 µS/cm |
| Silica (SiO2) Removal | 90-99% depending on feed water |
*Voltage required depends on module size
The information provided in this brochure contains general descriptions or performance characteristics that may not always apply as described in actual use cases or may change due to further product development. An obligation to provide the respective characteristics shall only exist if expressly agreed upon in the terms of the contract.
Company Details
Business Type:
Manufacturer
Ecer Certification：
Verified Supplier
Aquacells Membrane Technologies Co., Ltd. Aquacells Membrane Technologies Co., Ltd.
Get in touch with us
Leave a Message, we will call you back quickly!