Shijiazhuang Haobaijiu Trading Co., Ltd.
| Payment Terms | L/C |
| Delivery Time | 5-8 work days |
| Battery Type | Blade Battery |
| Seating Capacity | 5 seats |
| Engine Type | 1.5L Turbocharged Engine (for PHEV) |
| Model | BYD Qin PLUS (2nd Gen Intelligent Driving) |
| Battery Capacity | Varies by model (e.g., 18.3 kWh for PHEV) |
| Maximum Power | Total system power approx. 321 hp |
| Acceleration (0-100 Km/H) | Approx. 6.9 seconds |
| Transmission | 6-speed DCT (Dual Clutch Transmission) |
| Electric Range | Up to 120 km (PHEV model) |
| Safety Features | ADAS including adaptive cruise control, lane keeping assist, automatic emergency braking |
| Intelligent Driving System | 2nd Generation Intelligent Driving |
| Drive System | Plug-in Hybrid / Electric |
| Charging Time | Fast charging supported, approx. 1 hour to 80% (depending on charger) |
| Infotainment System | BYD DiLink Intelligent Connectivity System |
| Vehicle Type | Sedan |
| Brand Name | BYD |
| Model Number | BYD Qin plus Gen2 Intelligent Driving |
View Detail Information
Explore similar products
BYD Qin PLUS Gen2 Intelligent Driving Side Skirt Assembly | Lower Door Trim OEM
BYD Qin PLUS Gen2 Intelligent Driving Trunk Lid Assembly | Rear Trunk Lid OEM
BYD Qin PLUS Gen2 Intelligent Driving Rear Bumper Bracket Assembly (L/R) | Rear
BYD Qin PLUS Gen2 Intelligent Driving Front Bumper Bracket Assembly (L/R) |
Product Specification
| Payment Terms | L/C | Delivery Time | 5-8 work days |
| Battery Type | Blade Battery | Seating Capacity | 5 seats |
| Engine Type | 1.5L Turbocharged Engine (for PHEV) | Model | BYD Qin PLUS (2nd Gen Intelligent Driving) |
| Battery Capacity | Varies by model (e.g., 18.3 kWh for PHEV) | Maximum Power | Total system power approx. 321 hp |
| Acceleration (0-100 Km/H) | Approx. 6.9 seconds | Transmission | 6-speed DCT (Dual Clutch Transmission) |
| Electric Range | Up to 120 km (PHEV model) | Safety Features | ADAS including adaptive cruise control, lane keeping assist, automatic emergency braking |
| Intelligent Driving System | 2nd Generation Intelligent Driving | Drive System | Plug-in Hybrid / Electric |
| Charging Time | Fast charging supported, approx. 1 hour to 80% (depending on charger) | Infotainment System | BYD DiLink Intelligent Connectivity System |
| Vehicle Type | Sedan | Brand Name | BYD |
| Model Number | BYD Qin plus Gen2 Intelligent Driving |
This series is specifically designed for the front and rear wheel arches of the BYD Qin PLUS Gen2 Intelligent Driving Edition (2025 model and subsequent facelift models). It is a protective and soundproof component installed between the body sheet metal and the tire above each wheel—the fender liner assembly. Acting as a "close-fitting shield" for the wheels, the fender liner directly withstands mud splash and gravel impact during driving, blocking mud from corroding the body sheet metal, reducing tire rolling noise, and protecting wiring harnesses inside the wheel arch. It is a critical component for ensuring body durability and driving comfort.
Important Note: The original rear fender liner of the Qin PLUS is made of cotton/felt material with a design defect—there is no screw in the middle for fixation, causing it to soften and collapse when exposed to rainy season water. Many owners have reported that the original felt liner softens and collapses when wet, not only causing noise but also wearing down tires and increasing fuel consumption. This product is optimized to address this common issue, using PP+EPDM-T20 thickened hard plastic material injection molding, offering excellent water resistance, impact resistance, and dimensional stability, completely solving the defect of the original felt material softening when wet. The front fender liner is an OEM-spec injection-molded part, while the rear liner is an upgraded thickened hard plastic version. The mounting positions are 100% precisely matched with the original vehicle for direct replacement of aged, damaged, or collapsed original fender liner assemblies.
Company Details
Business Type:
Exporter
Year Established:
March 2019
Total Annual:
1 million-2.5 million
Employee Number:
two hundred and thir
Ecer Certification：
Verified Supplier
We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha... We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha...
Get in touch with us
Leave a Message, we will call you back quickly!