Shijiazhuang Haobaijiu Trading Co., Ltd.
| Payment Terms | L/C |
| Productname | BYD Destroyer 05 |
| Transmission | 6-speed Dual Clutch Transmission (DCT) |
| Enginetype | Plug-in Hybrid |
| Safetyfeatures | 360-degree camera, adaptive cruise control, lane departure warning |
| Batterytype | Blade Battery |
| Chargingtimefastcharge | 30 minutes (80% charge) |
| Drivetype | All-Wheel Drive (AWD) |
| Delivery Time | 5-8 workdays |
| Width | 1837 mm |
| Batterycapacity | 82.5 kWh |
| Fuel Type | Petrol |
| Electric Range | Approximately 100 km (NEDC) |
| Battery Capacity | 18.3 kWh |
| Motortype | Permanent Magnet Synchronous Motor |
| Pricerange | Approx. $25,000 - $30,000 USD |
| Manufacturer | BYD |
| Model Number | BYD Destroyer 05 |
| Brand Name | BYD |
View Detail Information
Explore similar products
BYD Destroyer 05 Side Skirt (Rocker Panel / Bottom Edge Trim)
BYD Destroyer 05 Trunk Lid (Rear Trunk Cover / Boot Lid / Decklid)
BYD Destroyer 05 Letter Emblem Assembly
BYD Destroyer 05 Rear Bumper (Rear Fascia / Rear Cover Assembly)
Product Specification
| Payment Terms | L/C | Productname | BYD Destroyer 05 |
| Transmission | 6-speed Dual Clutch Transmission (DCT) | Enginetype | Plug-in Hybrid |
| Safetyfeatures | 360-degree camera, adaptive cruise control, lane departure warning | Batterytype | Blade Battery |
| Chargingtimefastcharge | 30 minutes (80% charge) | Drivetype | All-Wheel Drive (AWD) |
| Delivery Time | 5-8 workdays | Width | 1837 mm |
| Batterycapacity | 82.5 kWh | Fuel Type | Petrol |
| Electric Range | Approximately 100 km (NEDC) | Battery Capacity | 18.3 kWh |
| Motortype | Permanent Magnet Synchronous Motor | Pricerange | Approx. $25,000 - $30,000 USD |
| Manufacturer | BYD | Model Number | BYD Destroyer 05 |
| Brand Name | BYD |
This product is professionally designed for BYD’s popular Ocean Series model—the BYD Destroyer 05, serving as a core safety component in the front suspension and wheel system that bears vehicle weight and connects to the drive axle.
As a professional manufacturing factory specializing in automotive chassis and wheel hub bearings, our front wheel hub assembly strictly follows OE specifications, dedicated to providing high-precision, high-durability replacement solutions for the global aftermarket.
The front wheel hub assembly (also known as front hub bearing unit) integrates the hub, wheel bearing, housing, and oil seal into a single unit, featuring a double-row angular contact ball bearing structure that effectively reduces friction and improves load capacity.
Compatible with all BYD Destroyer 05 models (including 2022-2025, 55KM/120KM range versions, Champion Edition, and Glory Edition). The vehicle features front-wheel drive layout with MacPherson independent front suspension—the front hub assembly is a critical rotating support component.
| English Features |
|---|
| OE-spec development with precisely matched mounting dimensions and bolt pattern |
| Double-row angular contact ball bearing design with high load capacity and smooth rotation |
| Integrated unit design combining hub, bearing, and housing for simplified installation |
| High-precision bearing steel material, heat-treated for wear and fatigue resistance |
| Built-in ABS/speed sensor magnetic encoder compatible with original vehicle electronics |
| 100% dynamic balance and axial play testing to ensure driving safety |
| Factory direct supply with OEM/ODM customization and bulk procurement |
Important Safety Note:
Front wheel hub assembly involves ABS sensor and drive axle connection. Ensure the magnetic encoder does not contact metal particles to avoid damaging speed sensing function.
Tools Required:
Lift or jack with safety stands
Socket wrench / Impact wrench
Torque wrench
Special axle nut socket
Grease
Installation Steps (General Reference):
Lift Vehicle: Raise the front using a lift, remove front wheels
Remove Brake Caliper: Remove caliper and secure to body to avoid straining brake lines
Remove Brake Disc: Remove brake disc
Remove ABS Sensor: Carefully remove wheel speed sensor to avoid damaging sensor tip
Remove Drive Axle Nut: Remove drive axle retaining nut and washer
Remove Tie Rod & Lower Arm: Disconnect tie rod end and lower arm ball joint bolts
Remove Knuckle Bolts: Remove hub-to-knuckle mounting bolts
Remove Old Assembly: Remove old front wheel hub assembly from knuckle
Clean Mounting Area: Clean knuckle bearing housing, apply proper grease
Install New Assembly: Install new hub assembly into knuckle, pre-tighten mounting bolts
Install Drive Axle: Insert drive axle spline into hub assembly, install washer and pre-tighten nut
Reinstall Disc & Caliper: Reinstall brake disc and caliper, torque to specification
Reinstall Wheel: Reinstall wheel and tighten, lower vehicle
Torque Axle Nut: Torque axle nut to specification with vehicle on ground
【Professional Tips】:
Pay attention to hub assembly orientation—ensure ABS magnetic encoder faces sensor side
Use diagnostic tool to verify ABS sensor signal after replacement
Recommended to replace both left and right sides as a pair for symmetric suspension and steering performance
Road test and wheel alignment recommended after replacement
Company Details
Business Type:
Exporter
Year Established:
March 2019
Total Annual:
1 million-2.5 million
Employee Number:
two hundred and thir
Ecer Certification：
Verified Supplier
We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha... We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha...
Get in touch with us
Leave a Message, we will call you back quickly!