BYD Destroyer 05 Letter Emblem Assembly

Product Specification

The BYD Destroyer 05 adopts BYD's "Ocean Aesthetics" design concept, with one of the most recognizable rear features being its letter emblem system. According to design analysis, the Destroyer 05 rear features a through-type taillight design with "Build Your Dream" lettering above the light strip, and "DM-i" and "Destroyer 05" badges on the left and right sides respectively to identify the vehicle.

According to third-party parts information, the Destroyer 05 letter emblem assembly typically includes: trunk letter mark ("Build Your Dream" or "BYD") , model badge ("Destroyer 05") , and powertrain badge ("DM-i") . The 2025 new Seal 05 DM-i features a simplified "BYD" three-letter badge after the name change.

In daily use, letter emblems are exposed to outdoor elements, sunlight, rain, and car washes – making them prone to surface oxidation/fading, plating peeling, letter detachment or damage. They are one of the exterior parts that may require replacement in vehicle detailing and collision repairs.

In daily use, letter emblems are exposed to outdoor elements, sunlight, rain, and car washes – making them prone to surface oxidation/fading, plating peeling, letter detachment or damage. They are one of the exterior parts that may require replacement in vehicle detailing and collision repairs.

The letter emblem is injection-molded from high-quality ABS engineering plastic with chrome plating or painted finish, offering excellent weather resistance and UV protection. UV stabilizers are added to the material – passes 500-hour xenon arc aging testing with no fading or gloss loss under long-term outdoor exposure.

According to product information, the letter emblem measures approximately 70×30mm , made of ABS plastic with chrome-plated finish and pre-applied 3M double-sided tape for quick and easy installation.

The letter emblem features 3M automotive-grade double-sided tape for adhesive installation – no drilling required, no damage to trunk lid paint. Simple installation steps: Clean mounting surface → Peel off backing → Align and apply → Press for 30 seconds. Replacement takes only 5-10 minutes by one person without professional tools..

Important Note: Thoroughly clean the mounting surface with alcohol before installation – ensure no oil, water, or dust. Avoid car washing or water contact for 24 hours after installation. For blacked-out letter emblem replacement, it can be directly applied over the original emblem without removing it.

Tool Preparation:

• Clean cloth

• Alcohol/cleaner (for surface cleaning)

• Hair dryer/heat gun (for low-temperature adhesion)

Installation Steps:

1. Clean Mounting Surface: Thoroughly clean the mounting area with alcohol – ensure no oil, water, or dust

2. Dry-fit: Position the letter emblem to confirm correct placement and level centering

3. Pre-heat Adhesive (low temperature): Use low heat to warm the 3M tape and mounting surface

4. Peel and Apply: Peel off the tape backing, apply to the marked position

5. Press Firmly: Press evenly for >30 seconds to ensure full adhesive contact

6. Final Inspection: Confirm the emblem is securely attached with tight edge fitment

【Professional Tips】

• Recommended installation temperature above 15°C – low temperatures reduce tape adhesion

• Avoid car washing or water contact for 24 hours after installation

• Blacked-out emblems can be applied directly over original emblems without removal

• Dry-fit before peeling the tape backing to confirm alignment