Shijiazhuang Haobaijiu Trading Co., Ltd.
| Wheelbase | 2,800 mm |
| Electricrange | Approximately 100 km (NEDC) |
| Max Torque | 245 Nm |
| Payment Terms | L/C |
| Seatingcapacity | 5 |
| Acceleration | 0-100 km/h in 7.9 seconds |
| Engine Type | Gasoline |
| Fuel Type | Petrol |
| Dimensions | 4760 mm (L) x 1800 mm (W) x 1760 mm (H) |
| Delivery Time | 5-8 workdays |
| Productname | BYD Destroyer 05 |
| Fuelconsumption | 1.3 L/100km |
| Enginetype | 1.5L Turbocharged Inline-4 |
| Maxpower | 245 kW |
| Battery Capacity | 18.3 kWh |
| Engine | 1.5L Turbocharged Inline-4 |
| Torque | 180 Nm |
| Model Number | BYD Destroyer 05 |
| Brand Name | BYD |
View Detail Information
Explore similar products
BYD Destroyer 05 Side Skirt (Rocker Panel / Bottom Edge Trim)
BYD Destroyer 05 Trunk Lid (Rear Trunk Cover / Boot Lid / Decklid)
BYD Destroyer 05 Letter Emblem Assembly
BYD Destroyer 05 Rear Bumper (Rear Fascia / Rear Cover Assembly)
Product Specification
| Wheelbase | 2,800 mm | Electricrange | Approximately 100 km (NEDC) |
| Max Torque | 245 Nm | Payment Terms | L/C |
| Seatingcapacity | 5 | Acceleration | 0-100 km/h in 7.9 seconds |
| Engine Type | Gasoline | Fuel Type | Petrol |
| Dimensions | 4760 mm (L) x 1800 mm (W) x 1760 mm (H) | Delivery Time | 5-8 workdays |
| Productname | BYD Destroyer 05 | Fuelconsumption | 1.3 L/100km |
| Enginetype | 1.5L Turbocharged Inline-4 | Maxpower | 245 kW |
| Battery Capacity | 18.3 kWh | Engine | 1.5L Turbocharged Inline-4 |
| Torque | 180 Nm | Model Number | BYD Destroyer 05 |
| Brand Name | BYD |
We, as a professional automotive body structural parts manufacturing factory, proudly present the Hood Hinge Assembly designed specifically for the BYD Destroyer 05 (5th Generation DM Super Hybrid) .
The hood hinge is a critical load-bearing component connecting the engine hood and the vehicle body, installed between the cowl panel and the engine hood, supporting opening, closing, and positioning functions of the hood.
According to the service manual, the tightening torque for the hood hinge-to-hood bolts is 9-11 N·m , and for the hinge-to-body bolts is 16.7-25.5 N·m . The hood hinge is typically stamped from high-strength steel with cathodic electrodeposition primer (E-coat) for excellent corrosion resistance .
According to parts data, the hood hinge is a body structural part, belonging to the body hinge system along with door hinges and other components. According to complaint information, hinge corrosion is a concern for some vehicle owners, making high-quality surface treatment essential.
In daily use, the hood hinge is long subjected to gravity during opening and impact forces during closing, making it prone to deformation, wear, corrosion, and noise – requiring replacement after collision repairs or extended use.
Our product is strictly developed to original Destroyer 05 OE specifications, with hinge mounting holes and bolt positions precisely matching the original 1:1. Compatible with all 2022-2025 Destroyer 05 models (55KM/120KM range versions, Champion Edition, and Glory Edition).
According to standard installation procedures, the hinge-to-body bolt torque is 16.7-25.5 N·m and the hinge-to-hood bolt torque is 9-11 N·m . Our product is designed to meet factory torque specifications – no additional adjustment required after installation.
The hood hinge is stamped from high-strength steel with thickened reinforcement at critical load-bearing areas. The surface features cathodic electrodeposition primer (E-coat) treatment, passing salt spray testing for excellent corrosion resistance.
According to maintenance data, corrosion of body attachment areas including hinges is a concern . Our product features rigorous pre-treatment and multi-layer E-coat application to effectively prevent rust and extend service life.
The hood hinge features a bolt-on mounting design – can be individually removed and replaced without cutting or welding. This design significantly reduces the complexity and cost of collision repairs, and can be completed by a single person.
According to hood hinge replacement standards, two persons are required for the operation: one uses No. 10 and No. 12 socket wrenches to remove the fixing bolts, while the other supports the hood to prevent falling . Installation follows the reverse order of removal.
Company Details
Business Type:
Exporter
Year Established:
March 2019
Total Annual:
1 million-2.5 million
Employee Number:
two hundred and thir
Ecer Certification：
Verified Supplier
We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha... We are more than just an auto parts manufacturer – we are your trusted partner for comprehensive BYD parts solutions. From R&D and mold development to production and logistics, we provide full-chain one-stop services. Whether you are an overseas importer, domestic wholesaler, repair cha...
Get in touch with us
Leave a Message, we will call you back quickly!