304 Stainless Steel ESD Turnstile Gate Security System For Cleanrooms

Product Specification

304 Stainless Steel ESD Swing Barrier Security System For Cleanrooms

Product Description

The Kemaisi intelligent anti static turnstile provides mandatory electrostatic protection control for highly sensitive workshops such as semiconductor and precision electronics manufacturing . Employees must pass through the electrostatic test pad next to the turnstile ; only when the static value is acceptable will the turnstile open , physically preventing non compliant personnel from entering . The device integrates facial recognition , electrostatic testing , and attendance into one : the employee stands on the electrostatic pad facing the recognition terminal , and the system automatically completes identity verification , static measurement , and simultaneously records clock in and overtime hours – achieving one stop passage . If the static test fails , the turnstile remains locked and gives a voice prompt : “ Static excessive – please use the static discharge ball ” . A static discharge ball can be provided nearby ; the employee presses it for 3 to 5 seconds and then retests . If the result is acceptable , passage is granted . The turnstile has built in fault self diagnosis and alarm functions for easy maintenance . In the event of a power outage , the device automatically sounds an alarm and opens the gate , ensuring safe evacuation . The anti pinch mechanism ensures that when the swing arm encounters resistance during reset , it automatically rebounds or the motor stops , with a force not exceeding 2 kg , effectively protecting the safety of personnel as they pass .

Operating Modes

• Single passage in the set direction

• Bi-directional single passage

• Free passage in the set direction

• Always free or locked

Features and Advantages

1 . Mandatory electrostatic testing , physically eliminating hazards

Employees must pass the electrostatic test pad with an acceptable value to gain passage . Those who fail cannot enter , removing the risk of personnel with excessive static entering the workshop at the source .

2 . Three in one : face recognition , static test , and attendance

Standing on the electrostatic pad , the employee completes identity verification , static detection , and clock in / out time recording in a single operation – saving time and effort while improving passage efficiency .

3 . Automatic reminder for failed test and on‑spot discharge

When the test fails , the turnstile remains locked and gives a voice prompt : “ Static excessive – please use the static discharge ball ” . A static discharge ball can be configured nearby ; after pressing it for 3 to 5 seconds and retesting successfully , passage is granted , forming a complete closed loop .

4 . Fault self diagnosis and alarm

Built in fault self diagnosis module triggers an automatic alarm when an abnormality occurs , helping maintenance staff quickly locate problems and reducing downtime .

5 . Power failure fire protection

In the event of a sudden power failure , the turnstile automatically sounds an alarm and immediately opens the gate , ensuring unobstructed emergency evacuation and meeting fire safety requirements .

6 . Gentle anti pinch safety

When the swing arm encounters resistance during reset , it automatically rebounds or the motor stops , with a maximum impact force not exceeding 2 kg . This effectively protects the safety of employees as they pass , especially in high traffic frequency scenarios .