Shenzhen CPET Electronics Co., Ltd.
| Aging Quantity | 60CH |
| Delivery Time | 30 work days |
| Control Module Model | PLC + touch screen control method |
| Coolingmethod | Refrigeration system |
| Supply Ability | 30sets/month |
| Temperatureuniformity | ±2°C |
| Heatingmethod | Electric heating |
| Guarantee Period | 12 month |
| Payment Terms | L/C,T/T |
| Power Per Channel | 600W/CH |
| Load Precision | ±（1%+0.1%FS） |
| Material | Stainless steel interior and exterior |
| Packaging Details | Wooden box packaging |
| Humidityaccuracy | ±2% RH |
| Weight | 500kg |
| Model Number | CP-BS3003 |
| Certification | CE,ROHS |
| Brand Name | CPET |
| Place of Origin | China |
View Detail Information
Explore similar products
New Energy Automobile BMS Controller Board Burn-in Test Equipment with 48 BMS
High-temperature Water-cooled Burn-in Aging Test Cabinet For Automotive Control
OBC Aging Test Chamber with 7KW and 11KW Capacity for Cost Recovery in 8-12
Burn-In Test System for Household Photovoltaic Inverters with Three-Phase Five
Product Specification
| Aging Quantity | 60CH | Delivery Time | 30 work days |
| Control Module Model | PLC + touch screen control method | Coolingmethod | Refrigeration system |
| Supply Ability | 30sets/month | Temperatureuniformity | ±2°C |
| Heatingmethod | Electric heating | Guarantee Period | 12 month |
| Payment Terms | L/C,T/T | Power Per Channel | 600W/CH |
| Load Precision | ±（1%+0.1%FS） | Material | Stainless steel interior and exterior |
| Packaging Details | Wooden box packaging | Humidityaccuracy | ±2% RH |
| Weight | 500kg | Model Number | CP-BS3003 |
| Certification | CE,ROHS | Brand Name | CPET |
| Place of Origin | China | ||
| High Light | High-temperature burn in equipment for BMS ，Vehicle-mounted BMS battery management system ，Burn in equipment for battery management system | ||
High-temperature Burn In Equipment For Vehicle-mounted BMS Battery Management System
The PLC should be equipped with a network port. An overcurrent fuse should be connected in series between the power supply and the product. The vehicle docking should be equipped with a floating device. After reaching the position, there should be a locking structure and a detection signal for reaching the position. 32A leakage switch with undervoltage trip. The heating time from room temperature to 85 degrees is less than 15 minutes. It is equipped with an electrical control cabinet and an HDMI high-definition interface display. Change the right side of the silk-screen printing to PowerTest5211 CAN box CANET-4E-U 12 pieces, with 2 spare parts prepared. MC terminal model: 148143, 24 pieces, with 4 spare parts in stock.
The total dimensions of the aging cabinet are: length 1800mm, width 1400mm, height 1800mm, and the layer height reaches 300mm. The product, including the carrier size, should be placed in an order of 350mm in length, 200mm in width and 180mm in height.
MC terminals are placed on each layer, and each terminal supplies power and communication for two products. There are 20 carriers in the entire container, with 2 products in each carrier, totaling 40 products. The vehicle docking should be equipped with a floating device. After reaching the position, there should be a locking structure and a detection signal for reaching the position. According to the size of the carrier, it is reasonably designed with 4 (5) terminals on each layer, making it a five-layer (four-layer) design.
| 1 | Power Supply Aging Test Cart — Appearance & Structure Overview: | |
| A | Cart Dimensions (mm): | Temperature-controlled type: L1800 × W1400 × H1800 mm, 20 carrier positions, 40 product positions. (Dimensions customizable per requirements) |
| B | Number of cart layers: | Product placement area: 4 layers |
| C | Cart layer height: | Product placement layer height: approx. 225 mm |
| D | Cart structural material: | 2.0 mm thick cold-rolled steel sheet |
| E | Load area heat dissipation: | Top-mounted turbo exhaust fan with upward discharge (facilitates ambient temperature control) |
| F | Inter-layer insulation & anti-static: | Shelf depth 520 mm, bakelite surface with heat dissipation holes |
| G | Cart structural form: | Test area isolated from the electrical control area |
| H | Sheet metal with visible glass doors: | Product area is enclosed, with insulated glass viewing doors |
| I | Others: | Smoke alarm installed in the aging cabinet product area |
| 2 | Control Module Configuration, DUT Power & Aging Quantity: | |
| A | Communication & control method: | Ethernet communication |
| B | Control module model: | PLC + touch screen + Huawei host computer control |
| C | Power supply method: | 3 customer-supplied Huawei power supplies installed in the cabinet |
| D | Product communication module: | Each product is equipped with 1 CAN-to-Ethernet channel communicating with the Huawei host computer; 40 CAN signals total per cabinet |
| E | Aging quantity configuration: | 4 layers = 20 fixtures per cart; 2 products per fixture, 40 products total per cart |
| 3 | Power Supply Aging Test Cart — Electrical & Temperature Control System: | |
| A | Wiring method: | Product DC and CAN ports equipped with MC dedicated terminals (customizable per customer requirements) |
| B | Panel function keys: | Input AC voltage display, start switch, emergency stop switch |
| C | Product area temperature control accuracy: | Product area is enclosed with insulated glass doors; temperature control range 50–85℃, not exceeding 90℃; temperature uniformity within ±3℃; warm-up from ambient to 85℃ in less than 15 minutes |
| D | Product area temperature control principle: | Low-temperature heating, over-temperature exhaust ventilation |
| E | Cart power distribution & control: | 380V three-phase five-wire power distribution, computer monitoring and manual electrical control. Aging time settable by the user in minutes |
| F | Cart power distribution rating: | 600W × 40 / 0.8 ≈ 8.0 kW; DUT actual power calculated at 200 W; aging cabinet power supply, exhaust & heating at 12 kW; actual power consumption approx. 20 kW |
| G | Control method: | Electrical control includes manual/automatic switching; aging is monitored in real time by computer |
| H | Safety protection: | Equipment grounding protection, leakage switch protection, smoke alarm automatic power-off protection, etc. |
| I | Control cabinet configuration: | Optional: 22-inch HDMI HD monitor for monitoring |
| 4 | Main System Functions: | |
| A | Suitable for aging of precision devices such as BMS controllers, radar controllers, cameras, etc. | |
| B | Proprietary monitoring software can be professionally developed and configured, with independent intellectual property and no legal risk | |
| C | Aging monitoring software enjoys lifetime upgrade service; powerful scalability saves duplicate equipment investment | |
| D | Aging parameters, time settings, ON/OFF sequence editing (DUT power on/off testing), support automatic voltage switching, load change and other programmable functions | |
| E | Automatic scheduled power-off after aging completes, enabling unattended operation | |
| F | Computer automatically displays the pass/fail status of DUT power supplies; window view of multiple carts for centralized management, saving manpower and improving production efficiency | |
| G | Computer can store DUT aging data reports and process parameters for traceability; also supports barcode scanning and MES system upload | |
| H | RS232-to-RS485 conversion uses opto-isolated converters to improve communication reliability and protect equipment from lightning damage | |
| I | Each computer can monitor 18 devices simultaneously (each serial port can connect 63 slaves; each computer supports up to 18 serial ports). This is the standard power aging cabinet configuration | |
| J | Power aging monitoring software includes built-in help documentation for immediate resolution of operational questions | |
Company Details
Business Type:
Manufacturer
Year Established:
2010
Total Annual:
10000000-15000000
Employee Number:
400~450
Ecer Certification：
Verified Supplier
CPET focuses on the research and development, manufacturing, sales and service of power electronic products such as power aging test, battery energy storage test, automatic aging test equipment, and intelligent monitoring software. Widely used in network communication, LED driven lighting, industria... CPET focuses on the research and development, manufacturing, sales and service of power electronic products such as power aging test, battery energy storage test, automatic aging test equipment, and intelligent monitoring software. Widely used in network communication, LED driven lighting, industria...
Get in touch with us
Leave a Message, we will call you back quickly!