Shenzhen Bicheng Electronics Technology Co., Ltd
| Payment Terms | T/T, Paypal |
| Supply Ability | 50000pcs |
| Delivery Time | 2-10 working days |
| Packaging Details | Packing |
| Brand Name | Rogers |
| Model Number | TMM10 |
| Certification | ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Rogers RO4003C LoPro 20.7mil Double-Sided Copper Clad Laminate raw material
Fabricate 2-Layer TMM6 PCB built on 15mil laminate and double sided copper with
Rogers RO4835 2layer PCB built on 6.6mil laminate core with immersion Gold 1 oz
15mil TMM10 laminate 2-layer PCB with 1oz copper and EPIG Finish using in RF and
Product Specification
| Payment Terms | T/T, Paypal | Supply Ability | 50000pcs |
| Delivery Time | 2-10 working days | Packaging Details | Packing |
| Brand Name | Rogers | Model Number | TMM10 |
| Certification | ISO9001 | Place of Origin | China |
High-Dk 2-Layer Design Using Rogers TMM10
In high-frequency circuit design, certain applications demand a dielectric constant significantly higher than standard microwave laminates. Chip testers, GPS patch antennas, satellite communication systems, and dielectric polarizers all benefit from materials with Dk values approaching 10—enabling circuit miniaturization, improved antenna gain, and specific phase response characteristics.
This article examines a 2-layer PCB implementation utilizing Rogers TMM10—a thermoset microwave laminate that bridges the gap between PTFE and ceramic-based substrates. The design features a 15mil (0.381mm) core with a finished thickness of 0.5mm, optimized for applications requiring high dielectric constant with robust mechanical properties.
1. Design Overview and Specifications
This double-sided rigid PCB measures 76mm x 118mm and utilizes a TMM10 core with a nominal Dk of 9.20—substantially higher than standard RF materials like RO4003C (Dk 3.38) or RO4533 (Dk 3.3). The table below summarizes the key construction parameters and design statistics.
| Parameter | Specification | Statistic | Qty |
| Base Material | Rogers TMM10 | Components | 34 |
| Layer Count | Double-sided (2-layer) | Total Pads | 56 |
| Board Dimensions | 76mm x 118mm (±0.15mm) | Thru-Hole Pads | 32 |
| Finished Thickness | 0.5mm | Top SMT Pads | 24 |
| Min Trace / Space | 4 / 6 mils | Vias | 24 |
| Min Hole Size | 0.35mm | Nets | 2 |
| Cu Weight | 1 oz (35 μm) outer layers | ||
| Via Plating | 20 μm | ||
| Surface Finish | ENEPIG | ||
| Solder Mask | Top: Green / Bottom: None | ||
| Silkscreen | Top: White / Bottom: None | ||
| Quality Standard | IPC-Class-2 |
Stackup Configuration: The 2-layer stackup consists of a TMM10 core (0.381mm / 15mil) sandwiched between two 1 oz copper layers, resulting in a finished board thickness of 0.5mm.
2. TMM10 Material Properties
Rogers TMM series materials occupy a unique position in the microwave laminate market. Unlike PTFE-based substrates, which are thermoplastic and prone to creep and cold flow under mechanical stress, TMM materials utilize a thermoset resin system. The table below presents the key electrical, thermal, and mechanical properties of TMM10.
| Property Category | Parameter | Value |
| Electrical | Dielectric Constant (Dk) | 9.20 ± 0.23 |
| Dissipation Factor (Df) | 0.0022 @ 10 GHz | |
| Thermal Coefficient of Dk | -38 ppm/°K | |
| Thermal Conductivity | 0.76 W/m/°K | |
| Thermal & Mechanical | Decomposition Temperature (Td) | 425°C (TGA) |
| CTE (X / Y / Z) | 21 / 21 / 20 ppm/°C | |
| Copper CTE (Reference) | 17 ppm/°C | |
| Moisture Absorption | Low (typical of thermosets) | |
| Key Benefits | No creep or cold flow | Maintains dimensional stability under load |
| No sodium napthanate treatment | Standard FR-4 via preparation process | |
| Chemical resistance | Withstands aggressive fabrication chemistries | |
| Thermoset resin | Enables reliable wire bonding |
The CTE of TMM10 is closely matched to copper in all three axes (21/21/20 ppm/°C vs. copper's 17 ppm/°C). This exceptional match minimizes thermo-mechanical stress on plated through-holes—critical for the 32 thru-hole pads and 24 vias in this design. The decomposition temperature of 425°C significantly exceeds standard lead-free soldering temperatures (260°C), providing a substantial safety margin during assembly.
3. Application Suitability
Given its high Dk, low loss, and mechanical robustness, this 2-layer TMM10 design is ideally suited for the following applications:
Chip Testers / Semiconductor Test Hardware
Dielectric Polarizers
Satellite Communication Systems
GPS Antennas & Patch AntennasGPS Antennas & Patch Antennas
4. Summary
The 2-layer PCB detailed here demonstrates an optimized implementation of Rogers TMM10 for applications requiring a high dielectric constant without compromising mechanical stability. With a 15mil core (0.5mm finished thickness), 1 oz copper, and ENEPIG surface finish, the design balances RF performance, thermal reliability, and fabricability.
For engineers working on chip testers, satellite communication systems, or compact GPS antennas, TMM10 offers a compelling value proposition: the high Dk (9.20) needed for circuit miniaturization, the low loss (0.0022) required for signal integrity, and the thermoset mechanical properties that eliminate creep, cold flow, and special via preparation processes—all while maintaining CTE match to copper for reliable plated through-hole performance.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2003
Total Annual:
10 million-18 million
Employee Number:
350~450
Ecer Certification：
Site Member
Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm... Founded in 2003, Shenzhen Bicheng Electronics Technology Co., Ltd is an established high frequency PCB supplier and exporter in Shenzhen China, severing cellular base station antenna, satellite, high frequency passive components, microstrip line and band line circuit, millimeter wave equipm...
Get in touch with us
Leave a Message, we will call you back quickly!