Product Specification

Stainless steel dental mechanical grinding needle - hook - Precision medical hardware accessory

Precision Machining of Grinding Tool Pins for Dental Handpieces

Key Manufacturing Challenges

1. Stringent Geometric Accuracy

    

   Dimensional tolerance is typically controlled within ±0.005–0.01 mm, roundness and cylindricity within 0.005 mm, with strict requirements for coaxiality and radial runout. Even minor deviations can cause vibration, jamming, or premature failure of the grinding head, directly affecting clinical stability.
    
2. High Surface Quality Standards

    

   Surface roughness must achieve Ra ≤ 0.8 μm, with high-end versions requiring Ra ≤ 0.2 μm. The surface must be free of tool marks, scratches, and micro-cracks to minimize friction, wear, and biological contamination risks.
    
3. Material and Heat Treatment Difficulties

    

   Common materials include 304/316L stainless steel and 40Cr or bearing steel. Stainless steel is prone to built-up edge and work hardening during machining, while high-carbon steel may deform or crack during heat treatment. Precise quenching and tempering are required to balance hardness HRC 45–52 and toughness.
    
4. Consistency in Mass Production

    

   Stable dimensions, surface finish, and hardness across batches pose high requirements for machine rigidity, tool management, and in-process inspection.
    

Recommended Processing Route

Key Processes & Target Specifications

• Precision Turning

   

  Equipment: Swiss-type lathe / dual-spindle CNC lathe

   

  Features: One-setup machining; coated carbide tools; roughing & finishing separated

   

  Target: Diameter tolerance ±0.01 mm, Ra 1.6–3.2 μm
   
• Fine Grinding

   

  Equipment: High-precision centerless grinder

   

  Features: Wheel wear control, online compensation, periodic calibration

   

  Target: Cylindricity ≤0.005 mm, Ra ≤ 0.8 μm
   
• Double-Surface Grinding

   

  Equipment: Double-surface grinding machine

   

  Features: Ensures flatness and perpendicularity

   

  Target: Perpendicularity ≤0.02 mm, Ra 0.3–0.5 μm
   
• Heat Treatment

   

  Equipment: Vacuum furnace / induction hardening

   

  Features: Vertical loading, low-temperature tempering for stress relief

   

  Target: Hardness HRC 45–50, no deformation or cracking
   
• Surface Treatment

   

  Equipment: Plating line / QPQ system

   

  Features: Pre-plating electropolishing, uniform coating

   

  Target: Wear-resistant, corrosion-resistant surface
   
• Fine Lapping / Burnishing

   

  Equipment: Lapping / burnishing machine

   

  Features: Improves finish and surface integrity

   

  Target: Ra ≤ 0.2 μm, enhanced surface hardness
   

Solutions to Typical Issues

• Precision control: High-rigidity machines, precision fixtures, optimized parameters, online gauging, tool life management.
• Surface quality: Diamond wheels, post-grinding lapping or burnishing, controlled cutting heat.
• Heat treatment stability: Vacuum heat treatment, vertical mounting, multiple aging processes.
• Stainless steel machining: Special cutting fluid, reduced cutting speed, optimized feed to avoid adhesion and work hardening.

Material Selection Guide

• 304/316L Stainless Steel: Ideal for biocompatibility and corrosion resistance; focus on reducing built-up edge and work hardening.
• 40Cr / Bearing Steel: For high hardness and wear resistance; requires strict heat treatment to avoid distortion.

Quality Inspection

• Dimension & form accuracy: Micrometer, projector, roundness tester for diameter, cylindricity, coaxiality, perpendicularity.
• Surface quality: Roughness tester, visual and microscopic inspection.
• Performance: Rockwell hardness, salt spray test, optional NDT for internal defects.

Conclusion

We have introduced advanced equipment and technology from Japan and Germany (CNC 5-axis and 6-axis machines) to better serve our customers' needs.

Our maximum processing outer diameter is 60, and the minimum control tolerance is 0.001. We have Japanese CNC Tsugami, CNC Citizen, multi-station cold extrusion forming machines, 500T press machines, casting equipment, and various process equipment, which can effectively provide customers with the best technical solutions.

Our company has a total of 300 employees, including 20 technicians, 10 engineers, and 15 quality control personnel. We have over 300 pieces of equipment.

Our company implements 8S management and has passed ISO9001 and TS16949 automotive certifications.

Our customers include , bo-sch, Foxconn, Motors, Husqvarna, Shimano, NVIDIA, DJI Drones, Siegenia, and Cater-pillar.