Like-for-like outage recovery
Used when a legacy AC 800M node must be restored without changing the commissioned PROFIBUS topology during the immediate outage.
AMIKON LIMITED
| ABB Article Number | 3BSE030220R1 |
| Model Number | CI854AK01 |
| Brand Name | ABB |
View Detail Information
Explore similar products
ABB 07KP90 Communications Module with 24V DC Supply Voltage Compatible with
ABB Bailey IEPAS02 AC System Power Module
ABB Bailey NTAO02 Termination Unit
ABB Bailey NTMP01 Multi-Function Processor Termination Unit
Product Specification
| ABB Article Number | 3BSE030220R1 | Model Number | CI854AK01 |
| Brand Name | ABB | ||
| High Light | ABB CI854AK01 PROFIBUS DP-V1 interface ，PROFIBUS DP-V1 AC 800M interface ，ABB PLC PROFIBUS interface module | ||
ABB · CI854AK01
ABB CI854AK01 legacy PROFIBUS DP-V1 communication package with CI854A and TP854, documented redundancy and an official migration path to CI854BK01.
CI854AK01 availability, lead time and order review
Send RFQCI854AK01 is an earlier AC 800M PROFIBUS DP-V1 kit containing CI854A and TP854. It is mainly relevant for installed-system repair or planned migration.
Select a category to view its specifications. All categories are closed by default.
| ABB article number | 3BSE030220R1 |
|---|---|
| Package contents | CI854A communication interface + TP854 baseplate, 60 mm wide |
| Galvanic isolation | Yes |
| Status indicators | Red error; green run; yellow traffic, primary and dual mode |
| Protocol | PROFIBUS DP / DP-V1 |
|---|---|
| Master services | DP-V0 master class 1 and 2; DP-V1 master class 2 |
| Transmission speed | 9.6, 19.2, 93.75, 187.5, 500, 1,500, 3,000, 6,000 or 12,000 kbit/s |
| Bus capacity | Maximum 32 nodes per segment; up to 124 nodes with repeaters |
| Connector | Two female DB9 connectors on TP854 |
| Line redundancy | Two PROFIBUS lines on TP854 |
|---|---|
| Master redundancy | Supported |
| Hot swap | Supported |
| 24 V CEX-Bus current | 190 mA typical; 240 mA maximum |
| Lifecycle / compliance note | Legacy spare; ABB documentation states not RoHS 2 compliant for the referenced installed-base use case |
| Power dissipation | 4.6 W typical |
|---|---|
| Protection class | IP20 to EN 60529 / IEC 529 |
| Certification in cited guide | UL 508 and UL 60079-15; Class 1 Zone 2 |
| Dimensions | 59 × 185 × 127.5 mm |
| Package weight | 700 g |
Installed-base role. Official System 800xA 5.1 material lists this package for AC 800M PROFIBUS DP-V1 communication, with TP854 providing the two DB9 network connectors.
Confirmed replacement. ABB lifecycle documentation names CI854BK01 (3BSE069449R1) as the replacement. The newer B hardware requires System 800xA 6.0.3.2 or Compact Control Builder 6.0.0-2 and later.
Migration boundary. A replacement order should include the current software release, controller type, redundancy design and project backup status. Do not assume that a newer interface can be inserted into an older software baseline without engineering work.
Used when a legacy AC 800M node must be restored without changing the commissioned PROFIBUS topology during the immediate outage.
The official successor path can be prepared during a controlled shutdown after software and project compatibility are checked.
Use the primary/dual and traffic indications to distinguish interface state from a cable, termination or inactive-line problem.
If cyclic I/O remains available but DP-V1 functions do not, review the device definition and master configuration before hardware replacement.
For new projects, review RoHS and lifecycle requirements; this model is documented for legacy repair and reuse rather than unrestricted new installation.
Amikon can review the part number, installed system, quantity, destination and required date before quotation, helping maintenance teams avoid incomplete purchase requests.
Independent multi-brand support for maintenance, outage and legacy-system requirements.
These models are listed only as independent sourcing references. They are not substitutes for CI854AK01. Compatibility, configuration and stock must be confirmed separately for each item.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!