Remote I/O and drive networks
Use as the AC 800M PROFIBUS master for supported DP/DP-V1 devices, including distributed I/O and drives.
AMIKON LIMITED
| ABB Article Number | 3BSE069449R1 |
| Model Number | CI854BK01 |
| Brand Name | ABB |
View Detail Information
Explore similar products
ABB 07KP90 Communications Module with 24V DC Supply Voltage Compatible with
ABB Bailey IEPAS02 AC System Power Module
ABB Bailey NTAO02 Termination Unit
ABB Bailey NTMP01 Multi-Function Processor Termination Unit
Product Specification
| ABB Article Number | 3BSE069449R1 | Model Number | CI854BK01 |
| Brand Name | ABB | ||
| High Light | ABB CI854BK01 PROFIBUS DP-V1 interface ，AC 800M PROFIBUS DP-V1 module ，ABB PLC communication interface | ||
ABB · CI854BK01
ABB CI854BK01 PROFIBUS DP-V1 master interface package with CI854B, TP854 baseplate, dual DB9 ports and verified redundancy support.
CI854BK01 availability, lead time and order review
Send RFQCI854BK01 connects AC 800M controllers to PROFIBUS DP/DP-V1 networks. The kit includes the CI854B interface and TP854 baseplate, with line- and master-redundancy support.
Select a category to view its specifications. All categories are closed by default.
| ABB article number | 3BSE069449R1 |
|---|---|
| Package contents | CI854B communication interface + TP854 baseplate |
| Galvanic isolation | Yes |
| 24 V consumption | Typical 190 mA; older product guide gives 240 mA maximum |
| Status indicators | Error, run, traffic, primary and dual-mode indications |
| Pollution degree | Degree 2 to IEC/EN 61131-2 |
| Protocol / role | PROFIBUS DP-V1 master |
|---|---|
| Channels / ports | 2 PROFIBUS channels |
| Transmission speed | 9.6 to 12,000 kbit/s |
| Services | DP-V0 master class 1 and 2; DP-V1 master class 2 services |
| Bus capacity | Maximum 32 nodes per segment; up to 124 nodes with repeaters in ABB hardware documentation |
| Connector | Two female 9-pin DB connectors on TP854 |
| Line redundancy | Yes |
|---|---|
| Module / master redundancy | Yes |
| Hot swap | Yes |
| High Integrity controller use | Yes |
| Max units on CEX-Bus | 12 |
| Power dissipation | 4.6 W typical |
|---|---|
| Operating / storage temperature | 0 to +55 °C / −40 to +70 °C |
| Corrosion protection | G3 to ISA 71.04 |
| Protection class | IP20 to EN 60529 / IEC 529 |
| Marine certificates | ABS, BV, DNV-GL, LR |
| Dimensions / weight | 59 × 185 × 127.5 mm; 700 g including base |
Required software. ABB states compatibility with System 800xA 6.0.3.2, Compact Control Builder 6.0.0-2 and later releases.
Network integration. PROFIBUS DP devices can connect directly. ABB also identifies LD 800P as the linking device for supported PROFIBUS PA connections. The bus must be terminated at its two outermost nodes; powered terminating connectors are required for a working termination.
Confirmed migration relationship. ABB lifecycle documentation identifies CI854BK01 as the replacement for CI854AK01. Treat the exchange as an engineered migration: verify the software baseline, hardware definition and redundancy arrangement before the outage.
Use as the AC 800M PROFIBUS master for supported DP/DP-V1 devices, including distributed I/O and drives.
Line redundancy uses the two PROFIBUS ports; master redundancy uses two communication interfaces and can be combined with controller/CEX-Bus redundancy where engineered.
Check bus termination, connector power, cable continuity and traffic LEDs before replacing the interface.
Review primary and dual-mode indicators and the Control Builder configuration. A hardware swap does not correct an inconsistent redundancy definition.
Compare configured baud rate, segment length/topology, repeater use and node count with the commissioned design.
Amikon can review the part number, installed system, quantity, destination and required date before quotation, helping maintenance teams avoid incomplete purchase requests.
Independent multi-brand support for maintenance, outage and legacy-system requirements.
These models are listed only as independent sourcing references. They are not substitutes for CI854BK01. Compatibility, configuration and stock must be confirmed separately for each item.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!