AMIKON LIMITED
| Delivery Time | 2-3 work days |
| Payment Terms | T/T |
| Place of Origin | SWEDEN |
| Brand Name | ABB |
View Detail Information
Explore similar products
ABB 07KP90 Communications Module with 24V DC Supply Voltage Compatible with
ABB Bailey IEPAS02 AC System Power Module
ABB Bailey NTAO02 Termination Unit
ABB Bailey NTMP01 Multi-Function Processor Termination Unit
Product Specification
| Delivery Time | 2-3 work days | Payment Terms | T/T |
| Place of Origin | SWEDEN | Brand Name | ABB |
| High Light | AC500-eCo Processor Module ，128 kB Memory ，Integrated Ethernet | ||
A legacy AC500-eCo processor intended primarily for existing installations and exact-model spare-part replacement. The complete article number should be matched before procurement rather than selecting a visually similar PM-series CPU.
| Product type | AC500-eCo processor module |
|---|---|
| Product ID | 1SAP121000R0071 |
| Program memory | 128 kB |
| Digital inputs | 6 DI |
| Digital outputs | 6 DO, relay |
| Analog inputs | 2 AI |
| Analog output | 1 AO |
| COM1 | RS-485, 9-pin D-sub female connector |
| COM1 transmission rate | 1.2 to 187.5 kBit/s |
| COM1 functions | Programming, free protocol, Modbus RTU master/slave and CS31 master |
| COM2 | Optional serial interface |
| Ethernet | Integrated Ethernet interface |
| Ethernet communication | Modbus TCP, HTTP, FTP, SNTP, DHCP and UDP |
| Supply voltage | 24 V DC |
| Maximum current consumption | 250 mA |
| Typical current consumption | 120 mA |
| Maximum power dissipation | 4.9 W |
| Processor | 32-bit Freescale ARM, 50 MHz |
| Programming languages | IL, FBD, LD, SFC, ST and CFC |
| Execution modes | Cyclic, time-controlled and multitasking |
| Data buffering | Flash memory |
| User program protection | Password protection |
| RUN/STOP switch | Yes |
| RTC | Optional |
| Mounting position | Horizontal or vertical |
| Dimensions | Approx. 82 × 135 × 74 mm |
| Weight | Approx. 350 g |
| Protection | IP20 |
| Operating temperature | 0 °C to +60 °C horizontal; 0 °C to +40 °C vertical, subject to documented load conditions |
| Humidity | Maximum 95%, non-condensing |
The full order code distinguishes this relay-output, Ethernet-equipped version from other PM564 variants.
The Ethernet interface is part of the processor module rather than a separately listed communication module.
ABB classifies this model as Classic, making exact-model sourcing relevant when maintaining an installed controller.
Check the installed pluggable terminal blocks before moving field wiring. Terminal blocks are selected separately from the processor module.
The controller is configured and programmed within ABB's AC500 programming environment using the documented IEC 61131-3 language set.
ABB documents optional serial and RTC accessories, as well as the MC503 memory card. Existing accessory configuration should be recorded before CPU replacement.
Record the existing application project, installed terminals and optional hardware before removing the processor. Do not assume a nearby PM-series housing has the same wiring.
Common procurement trigger: the installed processor fails or cannot return the controller to normal operation, creating an immediate spare-part requirement.
If the controller remains installed but Ethernet communication is unavailable, the processor may be investigated as part of the hardware fault diagnosis.
A processor-level fault can prevent the PLC application from executing, leaving dependent machine or process control unavailable until the fault is resolved.
ABB product ID: 1SAP121000R0071. Use this complete number when requesting a quotation or checking an installed unit.
Yes. The PM564 family includes different output and supply variants, so the complete order code should be matched rather than the PM564 family name alone.
No direct replacement should be assumed. ABB identifies PM5032-R-ETH as a possible migration device, so the existing application and hardware configuration need to be assessed before migration.
The ABB processor-module documentation is the appropriate reference for technical specifications, installation and configuration details. AMIKON can also use the exact part number to help identify the applicable documentation.
Send the complete Part Number, Quantity, Destination, Required Date and Machine/System Model. A photo of the installed nameplate can also help with exact-model checking.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!