AMIKON LIMITED
| Packaging Details | Brand new and original |
| Freight Collect | Customer DHL/FedEx Account Supported |
| Supply Ability | in stock |
| Delivery Time | 2-3 work days |
| MOQ | 1 Piece |
| Shipping Carriers | DHL | FedEx | UPS | TNT | Aramex (Global Shipping Available) |
| Quotation Time | Quick Quote Within 24 Hours |
| Payment Terms | T/T |
| Place of Origin | USA |
| Brand Name | Triconex |
View Detail Information
Explore similar products
Triconex 3625 Digital Output Module with TMR Architecture and 24VDC Supervised
9662-610 Triconex Termination Board with 16 Points 1500V AC Isolation and 16
Triconex 9771-210 Terminal Board with 16 Points Current Input in Flame-retardant
Bently Nevada 330101-00-20-15-02-05 8 mm Proximity Probe and CSA / ATEX / IECEx
Product Specification
| Packaging Details | Brand new and original | Freight Collect | Customer DHL/FedEx Account Supported |
| Supply Ability | in stock | Delivery Time | 2-3 work days |
| MOQ | 1 Piece | Shipping Carriers | DHL | FedEx | UPS | TNT | Aramex (Global Shipping Available) |
| Quotation Time | Quick Quote Within 24 Hours | Payment Terms | T/T |
| Place of Origin | USA | Brand Name | Triconex |
| High Light | TRICONEX 3625A ，32-Point Digital Output Module ，TMR Digital Output Module | ||
The 3625A is a 32-point TMR digital output module for Tricon systems, providing 24 VDC discrete outputs for supervised or non-supervised operation. It is specified for Tricon v10.2 and later systems.
| Specification | 3625A |
|---|---|
| Module type | 32-point TMR supervised / non-supervised digital output module |
| Output signals | 32, commoned |
| Nominal voltage | 24 VDC |
| Recommended voltage range | 16–32 VDC |
| Maximum voltage | 36 VDC |
| Logic power | < 13 W |
| Maximum current rating | 1.70 ± 10% A per point; 5 A surge for 7 ms |
| Total module output current | 10 A per termination panel |
| Minimum required load | 10 mA |
| Maximum output leakage | 2.0 mA at 24 VDC; 2.5 mA at 32 VDC |
| Field termination fuses | Not required; output switches are self-protected against over-voltage, over-temperature and over-current |
| System-to-field isolation | 1,500 VDC minimum |
| Point supervision | Can be programmed per point |
| Short/open detection | Programmable per supervised point |
| Module status indicators | PASS, FAULT, LOAD, ACTIVE |
| Point indicators | One On/Off status indicator per point |
| Field alarm | LOAD, one per point |
| Maximum output diagnostic toggle rate | Every 60 ms |
| Diagnostic glitch duration | 2 ms maximum; 200 μs typical |
| On-state voltage drop at backplane | < 0.16 VDC typical at 250 mA; < 1.12 VDC typical at 1.7 A |
| On-state voltage drop with 10-foot cable | < 1.15 VDC typical at 250 mA; < 3.33 VDC typical at 1.7 A |
| On-state voltage drop with 99-foot cable | < 2.71 VDC typical at 250 mA; < 8.92 VDC typical at 1.7 A |
| Inductive kick-back protection | Output switches are self-protected |
| Color code | Dark blue |
| Specified system generation | Tricon v10.2 and later |
Specified for Tricon v10.2 and later systems. The 3625A uses 16-point commoned field termination panels.
The 3625A is a modified version of the 3625 and is documented as fully compatible with 3625 applications.
Used inside a Tricon safety control system to provide discrete field outputs through a TMR output architecture.
Check field power, load condition and termination wiring.
Review module diagnostics and associated field conditions.
Check configuration, wiring and field supply before replacing the module.
Confirm the configured chassis and logical slot before installation. Tricon I/O modules are mechanically keyed for their configured positions.
Digital output modules require a separate field termination assembly and cable interface to the controller backplane.
The 3625A separates field power into two 16-point groups with a common return.
Verify the field supply arrangement against the applicable installation documentation before commissioning.
Three redundant channels participate in the output architecture.
Redundant output paths use voting to control the field output.
Voltage and current loopback circuitry supports output fault detection.
Supervision and short/open detection can be programmed per supervised point.
Before replacement, compare the installed system generation, termination arrangement, output configuration and field power setup with the applicable 3625A manual.
The manufacturer specifies the 3625A for Tricon v10.2 and later systems.
It is a 32-point TMR digital output module with a nominal 24 VDC output.
The 3625A modifies the field-power arrangement into two 16-point groups while retaining a common return and is documented as compatible with 3625 applications.
Yes. Digital output modules require a separate field termination assembly with a cable interface to the controller backplane.
Check the system generation, slot, termination assembly, point configuration, field wiring and field power arrangement.
Company Details
Business Type:
Trading Company
Year Established:
2004
Total Annual:
85682000-125000000
Employee Number:
70~80
Ecer Certification：
Verified Supplier
Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste... Company Profile Amikon Limited specializes in the global supply of industrial automation module spare parts.The company focuses on well-known international brands covering DCS systems, robot control systems, and large-scale servo control systems. Product scope includes: ➢Distributed Control Syste...
Get in touch with us
Leave a Message, we will call you back quickly!