Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection |
| Installation / Interface | 1/2-20 UNF; 6-Inch Rigid Stem; 6-Pin Connector |
| Primary Function | High-Temperature Polymer Melt Pressure Measurement |
| Brand | Gefran |
| Ordering Requirement | Verify F008531, Pressure Range, Stem, Connector and Nameplate |
| Supply Ability | 2 Units per Month |
| Product Type | Mercury-Filled Melt Pressure Transducer |
| Key Specification | 0–5000 psi; 3.33 mV/V; 0.5% FSO Accuracy Class |
| Payment Terms | T/T |
| Series / Control Platform | M3 Series |
| Delivery Time | 7-14 Days |
| Model | M30-6-M-P05M-1-4-0 2130X000X00 |
| Model Number | M30-6-M-P05M-1-4-0 2130X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran M31-6-M-P05M-1-4-D 2130X000X00 Melt Transducer
Gefran M31-6-M-P10M-1-4-D 2130X000X00 10000 psi Transducer
Gefran W31-6-M-P10M-1-4-D 2130X000X00 Oil-Filled Transducer
Gefran K31-6-M-P05M-1-4-D-H 2130X000X00 NaK Transducer
Product Specification
| Packaging Details | Anti-static Bag + Carton Box + Foam Protection | Installation / Interface | 1/2-20 UNF; 6-Inch Rigid Stem; 6-Pin Connector |
| Primary Function | High-Temperature Polymer Melt Pressure Measurement | Brand | Gefran |
| Ordering Requirement | Verify F008531, Pressure Range, Stem, Connector and Nameplate | Supply Ability | 2 Units per Month |
| Product Type | Mercury-Filled Melt Pressure Transducer | Key Specification | 0–5000 psi; 3.33 mV/V; 0.5% FSO Accuracy Class |
| Payment Terms | T/T | Series / Control Platform | M3 Series |
| Delivery Time | 7-14 Days | Model | M30-6-M-P05M-1-4-0 2130X000X00 |
| Model Number | M30-6-M-P05M-1-4-0 2130X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
The Gefran M30-6-M-P05M-1-4-0 2130X000X00 is a mercury-filled M3-series melt pressure transducer identified by Gefran ordering number F008531. It measures polymer melt pressure over a verified 0–5000 psi range and produces a low-level 3.33 mV/V strain-gauge signal for connection to a compatible pressure indicator, controller or signal conditioner.
This M30 configuration uses a rigid-stem-only construction. It is intended for applications where the sensor electronics can be positioned directly behind the 6-inch rigid stem without requiring a flexible capillary section.
| Complete Model | M30-6-M-P05M-1-4-0 2130X000X00 |
| Ordering Number | F008531 |
| Series | M3 |
| Pressure Range | 0–5000 psi |
| Output | 3.33 mV/V |
| Accuracy Class | 0.5% FSO |
| Connector | 6-pin |
| Process Thread | 1/2-20 UNF |
| Rigid Stem | 6 inches / approximately 153 mm |
| Flexible Capillary | None |
| Published Maximum Process Temperature | Up to 400°C, subject to installation conditions |
The rigid stem must place the pressure-sensitive diaphragm correctly within the process mounting hole while keeping the transducer housing within its permitted temperature range. Verify mounting-hole depth, thread condition, sealing surface and available clearance before installation. Do not use the housing to force a damaged thread into position.
The 3.33 mV/V output is not a 4–20 mA loop signal. The connected instrument must provide suitable bridge excitation and accept a low-level strain-gauge input. Confirm excitation voltage, connector pinout, R-Cal handling, shielding and controller scaling before energizing the system.
Do not clean the diaphragm with sharp or abrasive tools. Hardened polymer should be removed only by an approved procedure. Verify F008531 and the complete 2130X000X00 configuration because different diaphragm, accuracy, thread and stem codes can share a similar external appearance.
M30-6-M-P10M-1-4-0 2130X000X00 F008535 provides a 10,000 psi range. M31-6-M-P05M-1-4-D 2130X000X00 F008650 retains the 5000 psi range but adds an 18-inch flexible capillary. W3 and K3 models use different pressure-transmission fluids and temperature capabilities.
Related models are provided for family reference only and are not automatically interchangeable.
Provide photographs of the complete nameplate, connector, stem and diaphragm with the inquiry. Confirm whether the application permits a mercury-filled product under the applicable regional and installation requirements. Availability and calibration documentation require separate confirmation.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!