Dengfeng (XinXing) Trading Co., Limited
| Packaging Details | original packing |
| Process Connection / Installation | 1/2-20 UNF, 6-Pin Connector, 6-Inch Rigid Stem with 18-Inch Flexible Section |
| Pressure Range | 0 to 500 bar |
| Brand | Gefran |
| Ordering Requirement | Verify F007704, B05C range code, loop supply, connector and complete nameplate |
| Supply Ability | 2 Units per Month |
| Product Type | Melt Pressure Transmitter |
| Output / Accuracy Class | 4–20 mA / 0.5% FSO |
| Payment Terms | T/T |
| Series / Control Platform | ME1 Series / Mercury Filled |
| Delivery Time | 7-14 Days |
| Model | ME1-6-M-B05C-1-4-D 2130X000X00 |
| Model Number | ME1-6-M-B05C-1-4-D 2130X000X00 |
| Place of Origin | USA |
| Brand Name | Gefran |
View Detail Information
Explore similar products
Gefran ME1-6-M-P05M-1-4-D Melt Pressure Transmitter 5000 PSI
Gefran KE1-6-M-P10M-1-4-D-S NaK Melt Pressure Transmitter
Gefran KE1-6-M-P05M-1-4-D-S NaK Melt Pressure Transmitter
Gefran ME2-6-M-B07C-1-4-D-000 700 Bar Melt Transmitter
Product Specification
| Packaging Details | original packing | Process Connection / Installation | 1/2-20 UNF, 6-Pin Connector, 6-Inch Rigid Stem with 18-Inch Flexible Section |
| Pressure Range | 0 to 500 bar | Brand | Gefran |
| Ordering Requirement | Verify F007704, B05C range code, loop supply, connector and complete nameplate | Supply Ability | 2 Units per Month |
| Product Type | Melt Pressure Transmitter | Output / Accuracy Class | 4–20 mA / 0.5% FSO |
| Payment Terms | T/T | Series / Control Platform | ME1 Series / Mercury Filled |
| Delivery Time | 7-14 Days | Model | ME1-6-M-B05C-1-4-D 2130X000X00 |
| Model Number | ME1-6-M-B05C-1-4-D 2130X000X00 | Place of Origin | USA |
| Brand Name | Gefran |
The Gefran ME1-6-M-B05C-1-4-D 2130X000X00, ordering code F007704, is a 500 bar mercury-filled melt pressure transmitter for continuous pressure measurement in polymer extrusion equipment. Its amplified 4–20 mA output can transmit the process signal to a PLC or pressure controller over longer cable runs than a low-level mV/V bridge signal. The B05C calibration is intended for machines requiring a metric 500 bar full-scale value.
| Complete Model | ME1-6-M-B05C-1-4-D 2130X000X00 |
| Ordering Code | F007704 |
| Pressure Range | 0 to 500 bar |
| Output | 4–20 mA, two-wire |
| Supply Voltage | 10–30 VDC |
| Accuracy Class | 0.5% FSO |
| Process Thread | 1/2-20 UNF |
| Electrical Connector | 6-pin |
| Rigid / Flexible Length | 153 mm / 457 mm |
| Maximum Diaphragm Temperature | 400°C |
The 500 bar range is appropriate for extrusion processes whose normal operating window and protective limits are configured below this full scale. It can be used for monitoring pressure before or after a screen changer, at a melt pump inlet or outlet, or near an extrusion die. The connected PLC channel must support a powered two-wire current loop and the permitted load must be matched to the selected supply voltage.
A 500 bar transmitter must not be treated as a 7,500 psi transmitter merely because the nominal values are close. Five hundred bar is approximately 7,252 psi, so the controller span, displayed units, alarm limits and recorded process data will differ. After installation, verify the zero condition and use the calibration function only according to the applicable operating procedure. Do not use the flexible capillary to rotate or tighten the process connection.
ME1-6-M-B35D-1-4-D F007725 has a lower 350 bar range. ME1-6-M-B07C-1-4-D F007714 extends the range to 700 bar. ME1 P75C versions are calibrated to 7,500 psi rather than 500 bar. ME2-6-M-B05C-1-4-D F007769 incorporates a thermocouple and belongs to the pressure-and-temperature configuration group. Related models are provided for family reference only and are not automatically interchangeable.
Use F007704 together with the complete model when requesting a quotation. Verify that the supplied item carries the B05C range code and 2130X000X00 configuration. Photographs should clearly show the pressure range, output, connector, stem construction and all nameplate suffixes.
Company Details
Business Type:
Exporter,Trading Company,Seller
Year Established:
2024
Total Annual:
1000000-1500000
Employee Number:
10~25
Ecer Certification：
Site Member
Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h... Company Profile DF Automatic supplies industrial automation spare parts, control system components, and replacement parts to customers worldwide. Our product range covers PLC modules, servo drives, servo motors, variable frequency drives, HMI panels, industrial sensors, pneumatic components, h...
Get in touch with us
Leave a Message, we will call you back quickly!