View Detail Information
Explore similar products
Nickel 201 Pure Nickel Wire 0.025mm For Mesh
Ni200 0.15mm Thickness Pure Nickel Strip For 21700 2p 3p 4P
Irregular Ni200 0.2mm Pure Nickel Strip 2p 3p 4P For 21700
Battery Pure Nickel Strip 0.15m 0.2mm Thickness With 23.4 Pitch Distance
Product Specification
| High Light | pure nickel bars for chemical industry ,certified nickel bars marine grade ,pure nickel metal bars | ||
In modern chemical manufacturing and marine engineering, components are subject to continuous electrochemical attack, high-temperature caustic corrosion, and mechanical stress. Standard stainless steels and conventional alloys frequently fail under severe alkaline or chloride exposure due to pitting, stress corrosion cracking, and intergranular embrittlement. DLX pure nickel round bars resolve these operational challenges by forming a tenacious, self-healing oxide barrier that remains completely stable across wide pH ranges and operating temperatures up to 550°C.
Manufactured via high-purity Vacuum Induction Melting (VIM) followed by precision hot forging, multi-pass cold drawing, and protective atmosphere annealing, our nickel bars provide exceptional microstructural cleanliness, uniform mechanical response, and tight geometric tolerances. Every shipment is backed by 100% full-body non-destructive testing and comprehensive melt-specific chemical and mechanical inspection documentation.![]()
| Element | N4 (Ultra-High Purity) | N6 (Industrial Corrosion) | Ni201 (Low Carbon High-Temp) | Ni200 (Commercial Pure) |
|---|---|---|---|---|
| Nickel + Cobalt (Ni+Co) | ≥ 99.90% | ≥ 99.50% | ≥ 99.00% | ≥ 99.20% |
| Carbon (C) | ≤ 0.010% | ≤ 0.100% | ≤ 0.020% | ≤ 0.150% |
| Copper (Cu) | ≤ 0.015% | ≤ 0.100% | ≤ 0.250% | ≤ 0.250% |
| Silicon (Si) | ≤ 0.030% | ≤ 0.100% | ≤ 0.350% | ≤ 0.350% |
| Manganese (Mn) | ≤ 0.002% | ≤ 0.050% | ≤ 0.350% | ≤ 0.350% |
| Iron (Fe) | ≤ 0.040% | ≤ 0.100% | ≤ 0.400% | ≤ 0.400% |
| Sulfur (S) | ≤ 0.001% | ≤ 0.005% | ≤ 0.010% | ≤ 0.010% |
| Phosphorus (P) | ≤ 0.001% | ≤ 0.002% | Controlled Trace | Controlled Trace |
| Magnesium (Mg) | ≤ 0.010% | ≤ 0.100% | Controlled Trace | Controlled Trace |
| Property | Benchmark Value | Engineering Significance |
|---|---|---|
| Density | 8.89 g/cm³ | Consistent volumetric mass calculation for engineering design |
| Melting Range | 1435°C to 1446°C | Fixed high thermal threshold without premature phase softening |
| Curie Temperature | 358°C | Sharp ferromagnetic transition point for electronic instruments |
| Electrical Resistivity (20°C) | ~0.096 μΩ·m | High electrical conductivity for high-current busbars and leads |
| Thermal Conductivity | 70.2 W/(m·K) | Rapid heat dissipation in chemical evaporators and exchangers |
| Tensile Strength (Rm) | ≥ 462 MPa | Reliable structural load-bearing capacity under high pressure |
| Yield Strength (Rp0.2) | ≥ 148 MPa | Predictable deformation threshold during precision CNC turning |
| Elongation at Break (A5) | ≥ 35% | High ductility ensuring crack-free cold flanging and forming |
| Brinell Hardness | 90 - 120 HB | Optimal chip formation and extended tool life during machining |
| Supply Format | Diameter Range | Length Range | Diameter Tolerance | Surface Finish |
|---|---|---|---|---|
| Precision Cold Drawn Bar | 3.0 mm - 50.0 mm | 1,000 mm - 6,000 mm | Class h9 / h10 / h11 | Bright drawn / Centerless ground |
| Centerless Ground Rod | 5.0 mm - 80.0 mm | 1,000 mm - 4,000 mm | ±0.015 mm (Ra ≤ 0.8 μm) | Mirror polished / Precision ground |
| Hot Forged & Turned Round Bar | 50.0 mm - 350.0 mm | 1,000 mm - 6,000 mm | Precision rough turned | Machined smooth (Ra ≤ 1.6 μm) |
| Custom Turned Shaft Blanks | Per technical drawing | Per technical drawing | Custom tight tolerance | Chamfered ends / Ultrasonic cleared |
DLX pure nickel bars exhibit virtually zero corrosion rates in boiling, anhydrous sodium hydroxide (NaOH) and potassium hydroxide (KOH) at concentrations exceeding 70%. The natural formation of a nickel oxide passivating film prevents caustic embrittlement and catastrophic stress corrosion cracking in high-temperature alkali evaporation plants.
For chemical processing systems operating continuously above 315°C (600°F), DLX Ni201 strictly maintains carbon levels below 0.020%. This critical threshold inhibits intergranular graphite precipitation along crystal boundaries, completely preventing post-weld embrittlement and ensuring ductile integrity across extreme thermal cycles.
In high-velocity saline and estuarine waters, DLX N6 and Ni200 round bars provide robust resistance to cavitation damage, turbulent impingement, and biological bio-fouling. Their low galvanic corrosion potential in chloride media makes them the premier alloy selection for deep-sea instrumentation shafts, seawater intake valves, and desalination pump spindles.
Using multi-pass cold drawing benches and continuous centerless grinding units, DLX round bars achieve dimensional tolerances down to Class h9 and straightness within 0.5 mm per meter. This high geometrical consistency ensures smooth automatic bar feeding, reduced vibration during turning, and tight component threading.![]()
Employed for high-load evaporator heater tubes, molten caustic transfer pump shafts, autoclave agitator spindles, and chlorine gas handling valves operating under aggressive chemical reagents.
Integrated into high-pressure reverse osmosis pump shafts, submerged valve stems, marine acoustic transducer housings, and seaworthy fastening hardware exposed to continuous chloride immersion.
Applied as heavy-duty conductive busbars, high-current terminal feedthrough rods, and corrosion-resistant electrode support pins within high-efficiency alkaline and PEM water electrolysis stacks.
Utilized in viscose rayon spinning spinneret holders, fluorochemical reactor internal rods, and organic chloride distillation components where trace metallic contamination must be eliminated.
![]()
Straight bars are bundled and protected against transit damage; longer lengths travel in export wooden cases, seaworthy-packed for container shipment. In-stock diameters can be dispatched promptly, and production lead time is 7-15 days after drawing and grade confirmation. Every order ships with the complete export documentation set: packing list, commercial invoice and mill test certificate.
Certification is how a material earns entry into chemical plants and marine projects. Changzhou DLX Alloy Co., Ltd. has built its quality system around that requirement: ISO9001 for production management, SGS verification, and EN 10204 3.1 MTC on every shipment, so buyers can trace each bar to its heat and test results. Since 2002 the company has supplied nickel alloys to export markets where documentation is part of the product — and that discipline now underpins every bar order for chemical and marine duty.![]()
A1: Ni200 is the standard commercial pure grade with high mechanical strength and exceptional corrosion resistance for operating environments below 315°C (600°F). For equipment operating continuously above 315°C or involving severe post-machining welding, Ni201 is required because its ultra-low carbon chemistry (≤0.020%) prevents intergranular graphitization and high-temperature embrittlement.
A2: We offer cold drawn and precision centerless ground round bars with diameter tolerances adhering to Class h9, h10, and h11, and surface roughness down to Ra ≤ 0.8 μm. Precision straightness within 0.5 mm to 1.0 mm per meter guarantees reliable automated CNC bar feeder operation.
A3: All forged and rough-turned nickel bars above 15 mm diameter undergo 100% full-body ultrasonic non-destructive testing (UT) to verify zero internal shrinkage cavities, micro-voids, or non-metallic inclusion clusters prior to dispatch.
A4: Every batch ships with comprehensive inspection documentation specifying melt heat numbers, exact spectral chemical composition, tensile and yield strength, elongation percentage, Brinell hardness measurements, and non-destructive test records.
A5: Our minimum order quantity for custom bar dimensions is 10 kg, which covers custom machine setup and precise heat allocation. In-stock popular diameters can be dispatched within 3 to 5 business days, while custom rolling or forging orders are completed within 7 to 15 business days.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!