View Detail Information
Explore similar products
Bright 4P Pure Nickel Strip For 18650 Battery Connection
34.5mm Wide-Pitch 2P Nickel Strip — Double-Span Series Bridge for Staggered
2P Pure Nickel Welding Strip For 18650 Battery
Customized High Purity Nickel Strip for 18650 Battery Spot Welding
Product Specification
| High Light | Premium Aluminum Nickel Composite Sheet ,Custom Thickness Al/Ni Composite Sheet ,18650 Battery Tabs Al/Ni Composite Sheet | ||
DLX Alloy’s Al/Ni (Aluminum-Nickel) composite sheet is an advanced bimetal clad material engineered specifically for 18650 lithium-ion battery tab interconnections. By metallurgically bonding battery-grade aluminum and high-purity nickel, this composite foil provides a seamless electrical bridge that eliminates galvanic corrosion and ensures superior ultrasonic and spot welding performance in high-drain cylindrical battery packs.
![]()
Connecting aluminum battery tabs to external nickel or copper terminals poses significant challenges due to fragile intermetallic compounds formed during direct welding. DLX Alloy resolves this issue with our continuous solid-phase roll-cladding technology.
Our Al/Ni bimetal composite sheets feature atomic-level metallurgical bonding across the interface. The aluminum side easily welds to the internal positive aluminum electrode/can, while the nickel side welds cleanly to nickel-plated steel strips, copper busbars, or protection circuit boards (PCBs). This ensures minimal electrical transition resistance, high shear strength, and long-term electrochemical reliability in automated battery pack assembly lines.
![]()
| Parameter | Standard Range | Custom Capability | Inspection Method |
|---|---|---|---|
| Material Combination | Al1060 + Ni201 / Al1050 + Ni200 | Al3003 + N4 / Custom Alloys | Spectral Analysis |
| Total Thickness | 0.15 mm – 0.30 mm | 0.08 mm – 1.00 mm (±0.005 mm) | Precision Micrometer |
| Cladding Layer Ratio | 50% Al / 50% Ni | 10%–90% customizable | Metallographic Microscopy |
| Strip Width | 4.0 mm, 5.0 mm, 8.0 mm, 10.0 mm | Up to 200 mm (±0.05 mm) | Optical Comparator |
| Bonding Interface Strength | No peeling after 180° bend test | Tensile shear strength ≥ Base Al | ASTM/GB Standard Bending |
| Electrical Conductivity | Optimized composite conductivity | ≥42% IACS (alloy dependent) | Eddy Current Conductivity Meter |
| Surface Finish | Bright, clean, grease-free | Anti-oxidation treated | Visual / Roughness Gauge |
![]()
![]()
![]()
![]()
Q1: Why is an Al/Ni composite sheet preferred over direct aluminum-to-nickel welding?
A: Direct fusion welding between aluminum and nickel generates brittle intermetallic compounds and high interface resistance. DLX Alloy’s roll-bonded Al/Ni composite material solves this by providing a pre-bonded atomic transition layer, allowing standard Al-to-Al ultrasonic welding on one side and Ni-to-Ni spot welding on the other.
Q2: What is the standard thickness and layer ratio for 18650 battery tabs?
A: The most common total thickness is 0.15 mm or 0.20 mm with a 1:1 thickness ratio (e.g., 0.10 mm Al + 0.10 mm Ni). However, DLX Alloy can customize the total thickness from 0.08 mm to 1.0 mm and adjust the layer ratios to meet specific current-carrying and structural requirements.
Q3: Does the Al/Ni clad material delaminate during battery tab stamping or 90°/180° bending?
A: No. Our solid-state cladding process creates a permanent metallurgical bond. Every production coil passes 180° reverse bend tests without flaking, cracking, or layer separation.
Q4: How does DLX Alloy prevent burrs and oxidation during transport?
A: All Al/Ni coils are precision-slit using tungsten carbide blades to maintain edge burrs under 0.01 mm, followed by surface cleaning, vacuum packing with desiccant, and wooden case crating for global export.
Q5: What is your Minimum Order Quantity (MOQ) and sample lead time?
A: For standard trial runs, our MOQ is as low as 5 kg. Custom dimension sample coils can be delivered within 5–7 business days.
![]()
![]()
Company Details
Business Type:
Manufacturer,Seller
Year Established:
2002
Total Annual:
1000000-120000000+
Employee Number:
100~150
Ecer Certification:
Verified Supplier
Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ... Changzhou DLX Alloy Co., Ltd. was established in 2002 and has passed ISO9001 international quality management system certification and SGS certification.We initially focused on the production of resistance alloys. Over the past 20 years, we have continued to conduct research and development and now ...
Get in touch with us
Leave a Message, we will call you back quickly!