Product Specification

ZF-R Series Universal Motor Soft Starter

A universal soft starter is an electric motor control device that integrates motor soft starting, soft stopping, light-load energy saving, and multiple protection functions. It is widely used in motor control systems across industries such as industrial manufacturing, construction, and transportation. 

I. Working Principle

A universal soft starter controls the conduction angle of three-phase thyristors to regulate the voltage applied to the motor, gradually increasing it during startup to achieve smooth acceleration. The process includes:

1. Initial Stage: The thyristor conduction angle is small, applying a low voltage to the motor and limiting the starting current within a set range.
2. Acceleration Stage: The conduction angle gradually increases, raising the motor voltage and allowing the speed to rise steadily.
3. Running Stage: When the motor speed approaches the rated value, the thyristor becomes fully conductive, and the motor operates at full voltage.
4. Stopping Stage: The conduction angle is gradually reduced to lower the motor voltage, enabling a soft stop.

II. Key Features

1. Smooth Starting: Reduces current inrush during motor startup, minimizing stress on the power grid and mechanical equipment.
2. Soft Stopping: Prevents water hammer effects in pumps and other equipment caused by sudden stops.
3. Light-Load Energy Saving: Lowers motor voltage during light-load operation to reduce energy consumption.
4. Multiple Protection Functions:
   • Overload Protection: Monitors motor current and activates protection when it exceeds the set value.
   • Overvoltage/Undervoltage Protection: Safeguards the motor from voltage anomalies.
   • Phase Loss Protection: Detects phase loss in the three-phase power supply to prevent motor damage.
   • Overheat Protection: Monitors the internal temperature of the soft starter to prevent overheating.
5. Adjustable Parameters: Allows users to customize startup time, startup voltage, current limit, and other settings.
6. Communication Capabilities: Some models support protocols like Modbus and Profibus for integration with upper-level systems or PLCs.

III. Applications

Universal soft starters are suitable for applications requiring smooth starting and stopping, particularly in the following industries and equipment:

1. Industrial Sector:
   • Fluid transport equipment such as pumps, fans, and compressors.
   • Mechanical devices like conveyors, mixers, and crushers.
   • Production lines in textiles, paper, and food processing.
2. Construction Sector:
   • Air conditioning systems, elevators, and fire pumps.
3. Transportation Sector:
   • Traction motors and auxiliary equipment in metros, light rails, and airports.
4. Energy Sector:
   • Oilfield pumping units and coal mine hoists.

IV. Selection Guidelines

1. Motor Power: Choose a soft starter model based on the motor's rated power.
2. Rated Current: Ensure the soft starter's rated current meets or exceeds the motor's rated current.
3. Load Type:
   • Light Loads: Select a standard soft starter for applications like fans and pumps.
   • Heavy Loads: Opt for a soft starter with kick-start functionality for crushers and compressors.
4. Control Mode:
   • Online Mode: The soft starter remains in the circuit continuously, suitable for frequent startups.
   • Bypass Mode: Automatically switches to a bypass contactor after startup to reduce wear on the soft starter, ideal for infrequent startups.
5. Environmental Conditions: Choose a soft starter with the appropriate protection level based on installation temperature, humidity, and altitude.
6. Communication Needs: Select a model supporting the required communication protocol if integration with upper-level systems or PLCs is necessary.

V. Installation and Maintenance

1. Installation Tips:
   • Ensure the soft starter's rated voltage and current match the motor.
   • Install in a well-ventilated environment, avoiding high temperatures, humidity, and corrosive gases.
   • Follow the manual for proper wiring, especially for power, motor, and control signal connections.
2. Routine Maintenance:
   • Regularly check the soft starter's operating status and look for abnormal alarms.
   • Clean the heat sink to prevent dust buildup and overheating.
   • Inspect terminal connections for tightness to ensure good contact.
3. Troubleshooting:
   • Refer to the manual's fault codes for diagnosis if issues arise.
   • Common faults include overload, overheat, phase loss, and communication errors.