Testech Group Co., Ltd
| Packaging Details | In Carton |
| Delivery Time | 3-7 days |
| Payment Terms | T/T, Credit Card, Paypal, Western Union |
| Supply Ability | 5000pcs/month |
| Product | Dye Penetrant Inspection of Chrome-Plated Stainless Steel |
| Application | Liquid Penetrant Testing (LPT) |
| Material | Chrome-Plated Stainless Steel |
| Standard | ASTM E1417 AS2083/BS2704 ISO 3452-3 |
| Flaw Depth | 100µm |
| Model Number | B3 Penetrant Test Block |
| Brand Name | TESTECH |
| Certification | CE; ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
GST-1200 Fluorescent Penetrant Detection Equipment Testing Solution
Penetrant Testing Specimen B3 Depth 100um Width Target Value 0.5um Calibration
Reference Block Type A Aluminum Alloy Comparator For Penetrant Testing Per BS
Type II Cracked Chrome Penetrant Testing Panels EN 10204 Certified Per ISO 3452
Product Specification
| Packaging Details | In Carton | Delivery Time | 3-7 days |
| Payment Terms | T/T, Credit Card, Paypal, Western Union | Supply Ability | 5000pcs/month |
| Product | Dye Penetrant Inspection of Chrome-Plated Stainless Steel | Application | Liquid Penetrant Testing (LPT) |
| Material | Chrome-Plated Stainless Steel | Standard | ASTM E1417 AS2083/BS2704 ISO 3452-3 |
| Flaw Depth | 100µm | Model Number | B3 Penetrant Test Block |
| Brand Name | TESTECH | Certification | CE; ISO |
| Place of Origin | CHINA | ||
| High Light | Dye liquid penetrant testing ，ASTM E1417 penetrant testing materials ，ASTM E1417 process of dye penetrant testing | ||
B3 Stainless Steel Chrome Plating Dye Penetrant Inspection AS2083/2005, BS2704/1978/1983
Main application:
Dye penerant inspection
The Type B3 penetration test block (also known as the stainless steel three-point test block) is a means to test the sensitivity of the penetrant and verify the accuracy of the operation process. This test block determines the sensitivity level by displaying the number, quantity of lines, and clarity of three groups of radial cracks in the shape of small suns. It can also be used to check the corrosiveness of the penetrant to stainless steel materials.
| Parameter | Value |
|---|---|
| Model | YM-B3 |
| Linear Dimensions | All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled |
| Material Standard | according to ISO 10474-3.1.B,JIS G 0415-3.1.B |
| Material | Stainless steel chrome plating |
| Depth | 100µm |
| Width Target Value | 0.5µm |
| Test Standard | JB/T6064-2006,NB/T47013.5-2015 |
Standard delivery:
Instructions for Use
Scope of Application
This test piece is an effective means of quality control for penetrant materials, processes, and operation levels. It is suitable for penetrant testing (fluorescent or color contrast).
Usage
There are three groups of radial cracks of different sizes on the working surface of the Type B3 chrome-plated test piece, corresponding to high, medium, and low sensitivity levels of penetrant testing respectively.
At the beginning of the penetrant testing work, the test piece should be processed according to the process requirements of the penetrant system in use (process the test piece together with the parts to be inspected), and then observe the display of artificial defects on the test piece. If the display is the same as that in the photo, the sensitivity of the testing system is normal.
This test piece can also be used separately for the selection and acceptance of new testing agents or for the assessment of the operation of testing personnel.
Reference Pictures
Each test piece is accompanied by a reference image picture, which is a record of the images obtained when the test piece is inspected by Grade II testing personnel using medium and high sensitivity testing agents and can be used for reference by the using unit.
Precautions
1. After the test piece is used, the developer powder should be removed. After scrubbing with or alcohol, soak it in a solvent for future use.
4.2. Implement the testing procedure on the test piece according to the instruction manual of the testing agent in use. Since the color contrast testing agent will affect the fluorescence effect of the fluorescent testing agent, separate test pieces should be equipped for fluorescent and color contrast testing.
4.3. When the test piece is not in use, it is advisable to soak it in a desiccator filled with a mixed solvent of 50% aceton and 50% alcohol.
4.4. The test piece should be dried before use.
Company Details
Business Type:
Manufacturer
Year Established:
18 years
Total Annual:
250 US dollar-285 US dollar
Employee Number:
30~35
Ecer Certification：
Verified Supplier
TESTECH GROUP is a high-tech company where we focus on the research, development, and manufacturing of ultrasonic equipment as well as ultrasonic probes. Our enterprise still continues to devote itself to nondestructive testing and we are the leading manufacturer of nondestructive testing instrume... TESTECH GROUP is a high-tech company where we focus on the research, development, and manufacturing of ultrasonic equipment as well as ultrasonic probes. Our enterprise still continues to devote itself to nondestructive testing and we are the leading manufacturer of nondestructive testing instrume...
Get in touch with us
Leave a Message, we will call you back quickly!