Testech Group Co., Ltd
| Packaging Details | In Carton |
| Delivery Time | 3-7 days |
| Payment Terms | T/T, Credit Card, Paypal, Western Union |
| Supply Ability | 5000pcs/month |
| Product | Aluminum Alloy Comparator Block Type A Penetrant testing |
| Material | Aluminum Alloy |
| Standard | BS 2704:1983, AS 2083:2005, ISO 3452-3 |
| Highlight | Aluminum Alloy Penetrant Testing, YM-A Penetrant Testing, Penetrant Testing With ISO Standard |
| Name | Aluminum Penetrant Comparator Block |
| Model Number | Reference Block Type A |
| Brand Name | TESTECH |
| Certification | CE; ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
GST-1200 Fluorescent Penetrant Detection Equipment Testing Solution
Penetrant Testing Specimen B3 Depth 100um Width Target Value 0.5um Calibration
Dye Penetrant Inspection Of Chrome Plated Stainless Steel Components ASTM E1417
Type II Cracked Chrome Penetrant Testing Panels EN 10204 Certified Per ISO 3452
Product Specification
| Packaging Details | In Carton | Delivery Time | 3-7 days |
| Payment Terms | T/T, Credit Card, Paypal, Western Union | Supply Ability | 5000pcs/month |
| Product | Aluminum Alloy Comparator Block Type A Penetrant testing | Material | Aluminum Alloy |
| Standard | BS 2704:1983, AS 2083:2005, ISO 3452-3 | Highlight | Aluminum Alloy Penetrant Testing, YM-A Penetrant Testing, Penetrant Testing With ISO Standard |
| Name | Aluminum Penetrant Comparator Block | Model Number | Reference Block Type A |
| Brand Name | TESTECH | Certification | CE; ISO |
| Place of Origin | CHINA | ||
| High Light | Type A reference block ，BS 2704 reference block ，Aluminum Alloy ut reference block | ||
Cracked Aluminum Test Blocks compare sensitivity of different penetrants or sensitivity of new and used penetrants. This is done by processing one half of the block with used penetrant and the other half with fresh penetrant. It is manufactured to meet the ASME Boiler Pressure Code, Section V & III, and MIL-I-23135-C. The cracked aluminum block is made from 2024 aluminum and is 3" x 2" x 3/8" thick. A 1/8" wide groove separates the blocks two sides to facilitate side-by-side penetrant comparison.
It can be supplied with a Material Certification Form stating that the block meets:
Aluminum alloy test block is composed of two parts with the same size after the same test block is cut open, and marked with the same serial number, respectively marked with A, B mark, A, B test block should have A fine relative weighing crack pattern. Other requirements of aluminum alloy test blocks shall be in accordance with the relevant provisions of JB/T 9213.
Aluminum alloy test block is mainly used in the following two situations:
Model:YM-A (type A)
Through the physical and chemical test type A block material for LY12 aluminum alloy for materials, the chemical components conform to the provisions of ASTM,GB/T3190
By means of a micrometer measurement block length is 76 + 0.1 ㎜, and the width fifty + / - 0.1 ㎜, thick and ± 1 ㎜. Cut along the length center evenly divided into two pieces, and in block A and B and unity Numbers, block length orientation and plate rolling direction. Milling, grinding the surface roughness after treatment for Ra = 1.2 u m - 2.5 u m.
Color: Visual its color is silvery white.
Oxidizing property :In -55 ℃ ~ 200 ℃ - store between three years not metamorphism, no oxidation,
Crack: In the same Numbers of the A and B block with dye penetrant inspection method measured random crack 3 μ m, 3 μ m ~ 5 μ m and more than 5 μ m open crack on one side not less than four, and there are two above width is not more than 3 μ m open crack. Block A and B on the surface crack distribution is similar.
| inspection item | Test method and condition and requirement | Check Result |
| Block Material | Through the physical and chemical test type A block material for LY12 aluminum alloy for materials, the chemical components conform to the provisions of ASTM,GB/T3190. |
pass |
|
Form and dimensions |
By means of a micrometer measurement block length is 76 + 0.1 ㎜, and the width fifty + / - 0.1 ㎜, thick and ± 1 ㎜. Cut along the length center evenly divided into two pieces, and in block A and B and unity Numbers, block length orientation and plate rolling direction. Milling, grinding the surface roughness after treatment for Ra = 1.2 u m - 2.5 u m. |
pass |
| Colour | Visual its color is silvery white. | pass |
| Oxidizing property | In -55 ℃ ~ 200 ℃ - store between three years not metamorphism, no oxidation, colour and lustre is silver | pass |
| Crack | In the same Numbers of the A and B block with dye penetrant inspection method measured random crack 3 μ m, 3 μ m ~ 5 μ m and more than 5 μ m open crack on one side not less than four, and there are two above width is not more than 3 μ m open crack. Block A and B on the surface crack distribution is similar. | pass |
Company Details
Business Type:
Manufacturer
Year Established:
18 years
Total Annual:
250 US dollar-285 US dollar
Employee Number:
30~35
Ecer Certification：
Verified Supplier
TESTECH GROUP is a high-tech company where we focus on the research, development, and manufacturing of ultrasonic equipment as well as ultrasonic probes. Our enterprise still continues to devote itself to nondestructive testing and we are the leading manufacturer of nondestructive testing instrume... TESTECH GROUP is a high-tech company where we focus on the research, development, and manufacturing of ultrasonic equipment as well as ultrasonic probes. Our enterprise still continues to devote itself to nondestructive testing and we are the leading manufacturer of nondestructive testing instrume...
Get in touch with us
Leave a Message, we will call you back quickly!