Easy Installation FM200 Gas Suppression System with 90L Cylinder and Reasonable

Red Cylinder FM200 Gas Fire Suppression System — Easy and Convenient Installation

FM200 (HFC-227ea) is a colorless, tasteless, non-corrosive, and electrically insulating gas that leaves no residue or pollution after extinguishing. Its ODP (Ozone Depletion Potential) is zero, making it an environmentally friendly extinguishing agent. Thanks to these properties, it is especially suitable for locations where electrical fires are likely to occur.

Combined with the extinguishing device and electronic accessories, the whole system can be actuated automatically. It monitors the protected region through detectors and can start the extinguishing device via a solenoid actuator automatically, achieving full automation. This eliminates the risk of a fire going unnoticed when no one is present and saves the cost of employing personnel to supervise the protected area.

Management of multiple zones is also under the safe control of the whole system. A single system can protect multiple zones through selective valves, allowing it to target different protected zones in turn. The agent is discharged directly into the zone where the fire occurs, making fire suppression highly efficient in a short time. Note that a small room should be reserved as storage space for the entire system.

Typical protected spaces include electronic computer rooms, data processing centers, telecommunications facilities, process control rooms, expensive medical equipment, industrial equipment, libraries, museums and art galleries, clean rooms, anechoic chambers, emergency power facilities, and flammable liquid storage areas.

The system is also well suited to locations where fires easily occur, such as paint-spraying production lines, aging electrical equipment, rolling machines, printing machines, oil switches, oil-immersed transformers, melt impregnating tanks, storage tanks, large generators, drying equipment, cement production processes involving pulverized coal, and ship engine rooms and cargo holds.

The pipe network FM200 fire suppression device is composed of the following components: FM200 agent, FM200 cylinders, container valves, flexible hoses, liquid flow check valves, a manifold set, a safety valve, a pressure switch, nitrogen driving device(s), a driving device frame, gas control piping, gas flow check valves (depending on configuration), selective valves (depending on configuration), a pair of elbows and flanges, and nozzles.

If one device set needs to protect multiple protected zones, its composition is as described above. However, if a system only needs to protect a single protected zone, the gas flow check valve and selective valve should be removed from its composition.

Every fire suppression system has its strong points. Below are the key advantages of the pipe network type FM200 fire suppression system.

1. Flexible application in protection zones. Thanks to its structure and the assembly of other useful components, a very large protection zone can be covered by combining multiple storage cylinders, while a very small area can be covered with a single-cylinder system.
2. Efficient gas spraying. One pipe network system can achieve an even discharge across large zones in a short time with the help of proper pipeline deployment.
3. Combined distribution system. The most distinctive and flexible advantage of this system is the combined distribution system, which can combine multiple rooms in one district or building — even with different dimensions or on different floors. It reduces cost through the safe and economical use of fire extinguishing gas. Selective valves guide the agent into the room on fire, making it relatively smarter to monitor each room and avoid accidents. Note that, in accordance with our standard, combined rooms should number no more than 8.

Guangzhou Xingjin Fire Equipment Co., Ltd. is located in Guangzhou, a key hub of communication between China and the world, surrounded by convenient transportation and a beautiful environment. As a manufacturer, we devote ourselves to the research and development of HFC-227ea (FM200) products with a professional and mature team that includes a program design team, a skilled installation team, a quality detection team, and an after-sales service team.

Our popular FM200 products are widely used and include the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher (ceiling-mounted style), the fire detecting tube suppression system, and the automatic fire suppression tube. Thanks to high-quality products and services as well as a strong reputation, our company is well received by customers in China.

• 5-year quality guarantee
• Xingjin operates under a high-efficiency management system
• Advanced equipment and professional engineers ensure all products are highly satisfactory
• 8 × 6 hours of technical support and service

• An efficient sales and after-sales team to resolve all client questions in a timely manner
• 8 × 6 hours of technical support and service