Without Pollution HFC-227ea Hanging Fire Suppression System and FM200 Hanging

The HFC-227ea/FM200 hanging fire suppression system is a self-contained unit that mounts directly to a wall or ceiling. The assembly integrates the agent container, nozzle, and automated suspension valve into a single compact device. When a fire is detected, the extinguisher activates either manually or automatically, with the solenoid sensor and temperature sensor serving as the default activation modes.

• Designed for smaller rooms and does not occupy any floor area.
• Delivers a brief spray duration and extinguishes fires with speed and accuracy.
• Requires minimal engineering expenditure for installation and construction.
• Combines automatic fire detection and suppression control in a modern intelligent system.
• Uses HFC-227ea/FM200 (Heptafluoropropane), an electrically inert, non-combustible, colorless, and odorless gas.
• No pollution from secondary gas and no chance of ozone depletion.
• Offers high electrical insulation, low toxicity, low flammability, and superior cleanliness.
• Serves as an excellent replacement for halon-based extinguishing agents.
• Capacity, extinguishing agent volume, and starting point are selected based on the size of the protected location.

The data below refers to a regular temperature of 20 ℃ and atmospheric pressure of 1 bar. Maximum coverage may vary slightly with ambient temperature and pressure in real conditions.

The following components typically make up the system:

1. Pressurized container: Stores the HFC-227ea agent under pressure. The container is typically constructed from steel and built to withstand the agent's pressure.
2. Distribution pipelines: Transport the agent from the storage container to the nozzles that release it into the protected area. Steel or other corrosion-resistant materials are typically used.
3. Nozzles: Release the agent into the protected area. Nozzles are carefully positioned to ensure uniform distribution of the agent throughout the space.
4. Detection and control system: Monitors the protected area for fires and activates the suppression system when one breaks out. The system may use heat detectors, smoke detectors, or other types of sensors.
5. Alarm system: Notifies occupants that a fire has been detected and that the suppression system has been activated. The alarm system may include both visual and auditory alarms.
6. Manual release station: Allows manual activation of the suppression system in the event of a fire. The station may be located inside or outside the protected area, depending on the specific application.
7. Discharge piping: Transports the agent from the nozzles to the protected area. Steel or other corrosion-resistant materials are typically used.

This system is suitable for a wide range of sensitive and high-value environments, including clean rooms, anechoic chambers, emergency power facilities, flammable liquid storage spaces, data processing centers, telecommunications facilities, process control rooms, pricey medical equipment areas, industrial equipment areas, libraries, museums, and art galleries.

It is also well suited to fire-prone areas such as ship engine rooms, cargo holds, rolling and printing equipment, oil switches, oil-immersed transformers, melt impregnating tanks, and equipment used in the production of cement from pulverized coal.

The automatic FM200 fire extinguisher is available in two distinct system types, both offering the same core benefits:

1. Optimized for minimal protection areas: Some relatively small spaces, such as server rooms or electrical rooms, require only a small amount of fire extinguishing agent. For these, a hanging-type method is ideal.
2. Space-efficient design: Small protection zones may have limited room for additional equipment or objects. The ceiling-mounted type is designed with the simple but crucial function of fire suppression and full room coverage without occupying floor space.
3. Simple installation and transport: The unit is relatively light and compact, allowing a single person to hold and install it to the top of a wall or ceiling. The temperature-controlled variant cannot be set up in more than one component, either theoretically or practically.

Each unit is packed with polyfoam first and then placed into a wooden case. To meet customer or safety requirements, goods can also be secured on a pallet.

Guangzhou Xingjin Fire Equipment Co., Ltd. is situated in Guangzhou, a vital hub connecting China with the rest of the globe. The company benefits from excellent transportation links and a pleasant environment. As a manufacturer, our knowledgeable and experienced team includes a program design team, a skilled installation team, a quality detection team, and an after-sale service team, all dedicated to the research and development of HFC-227ea (FM200) products.

Our current product range includes the FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automated FM200 fire extinguisher (ceiling-mounted style), the fire detecting tube suppression system, and the automatic fire suppression tube. Thanks to our high-quality products and services, as well as our reliable reputation, our company is well regarded by customers throughout China.