20L Heptafluoropropane Hanging Fire Suppression System with Enclosed Flooding

A hanging fire suppression system (also known as a suspended fire suppression system) is a fire protection system designed to detect and suppress fires in specific areas or rooms. It is typically installed in commercial and industrial settings where fire hazards are present, such as data centers, server rooms, electrical control rooms, or storage facilities. The system comprises the following key components:

1. Detection System: A variety of fire detection tools, including smoke detectors, heat detectors, and flame detectors, are included in the system. These detectors are strategically placed in the protected area to monitor for fire indicators.
2. Control Panel: The system's principal command center. It collects signals from the detectors and processes the data to identify whether a fire is present. The suppression process begins when a fire is detected.
3. Suppression Agent: Depending on the unique requirements and characteristics of the protected area, the suppression agent can vary. Common agents include water, foam, inert gases (such as nitrogen or argon), or clean agents (such as FM200 or Novec 1230). The choice depends on the type of fire, the presence of high-value equipment, and environmental considerations.
4. Sprinkler System: A sprinkler system may be included. When a fire is detected, sprinkler heads placed in strategic locations throughout the protected area are triggered, releasing water or other effective suppression chemicals to contain or extinguish the fire.
5. Piping Network: A network of pipes is installed across the protected area to carry the suppression agent to the designated locations. The pipe system ensures even distribution of the fire suppression agent, maximizing its efficiency.
6. Discharge Nozzles: Discharge nozzles are positioned and attached to the piping network to provide optimal coverage. These nozzles distribute the suppression agent in a predetermined pattern to effectively extinguish the fire.
7. Activation and Control: The suppression system is activated when the control panel detects the presence of a fire. This typically involves sounding an alarm to notify occupants and initiating the release of the suppression agent through the piping system and discharge nozzles. The control panel may also interface with other building systems, such as HVAC or access control, to assist fire response and evacuation operations.
8. Safety Features: Safety precautions are built into hanging fire suppression systems to guard against unintentional discharge or system failure. These include pressure sensors, manual activation stations, and alarms to signal system status or errors.
9. Maintenance and Inspections: Regular maintenance and inspections are essential to ensure proper functioning. This includes checking the pressure and integrity of the piping network, testing the detection devices, and verifying the functionality of the control panel.

The design and installation of a hanging fire suppression system may vary depending on specific building requirements and local fire safety regulations. Consulting with a fire protection professional is recommended to ensure compliance and the most effective system for a particular application.

Suitable for electronic computer rooms, data processing centers, telecommunications facilities, process control rooms, expensive medical equipment areas, industrial equipment zones, libraries, museums and art galleries, clean rooms, anechoic chambers, emergency power facilities, and flammable liquid storage areas.

Also ideal for locations where fire is likely to occur, including paint-spraying production lines, aging electrical equipment, rolling machines, printing machines, oil switches, oil-immersed transformers, melt impregnating tanks, large generators, drying equipment, cement production processes involving pulverized coal, and ship engine rooms and cargo holds.

• Small but effective design
• Extremely simple installation
• Minimal space required for placement
• Hangs on the ceiling or wall
• Low cost for small protective zones

There are two different types of hanging FM200 fire suppression systems: the electromagnetic hanging type and the temperature-based hanging type. They have slightly different compositions.

The FM200 cylinder, FM200 fire agent, pressure switch, solenoid actuator, container valve, and nozzle are all components of the electromagnetic hanging type FM200 fire extinguisher system.

A temperature sensor, FM200 cylinder, FM200 fire agent, and nozzle make up the temperature-based hanging type FM200 fire extinguisher.

A fire occurs → smoke/heat detectors detect the anomaly and send a signal to the control panel → the control panel receives the signal and activates the alarm bell to alert occupants to evacuate quickly → after receiving signals from both smoke and heat detectors and a few seconds' delay, the control panel activates the fire extinguishing system.

A fire occurs → the internal temperature rises high enough to break the temperature sensor → the fire agent is released and sprays from the nozzle.

Guangzhou Xingjin Fire Equipment Co., Ltd., surrounded by convenient transportation and a beautiful environment, is located in Guangzhou, a key hub for communication between China and the world. We are a manufacturer dedicated to the research and development of HFC-227ea (FM200) products, supported by a professional and mature team including a program design team, a skilled installation team, a quality detection team, and an after-sales service team.

Our popular FM200 products are widely used, including the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher (ceiling-mounted style), the fire detecting tube suppression system, and automatic fire suppression tube. As a result of high-quality products and services as well as our good reputation, our company is well-received by customers in China.

• 5-year quality guarantee
• Xingjin operates under a high-efficiency management system
• Advanced equipment and professional engineers ensure all products are highly satisfactory
• 8×6 hours technical support and service

• An efficient sales and after-sales team to resolve all client questions promptly
• 8×6 hours technical support and service