180L Low Maintenance FM200 Gas Suppression System with Totally Flooding HFC

The 180L Type HFC-227ea (FM200) fire suppression system delivers fast, clean, and reliable fire protection for critical facilities. Designed for multi-zone control and long-term durability, it extinguishes fires in seconds while leaving no residue behind.

FM200 (HFC-227ea) is a colorless, odorless, non-corrosive, and electrically insulating gas that leaves no residue or pollution after extinguishing. Its Ozone Depletion Potential (ODP) is zero, making it an environmentally friendly extinguishing agent. These properties also make it suitable for special locations where electrical fires are likely to occur.

Combined with the extinguishing device and electronic accessories, the whole system can be actuated automatically. It monitors the protected area through detectors and can start the extinguishing device via a solenoid actuator automatically, achieving full automation. This avoids the risk of an unnoticed fire and reduces the cost of employing personnel to supervise the protected area.

An FM200 fire extinguishing system is a type of gaseous fire suppression system that uses FM200 gas to extinguish fires quickly and effectively. FM200 is a clean agent that is colorless, odorless, electrically non-conductive, and leaves no residue after discharge. The system is commonly used in critical facilities such as data centers, museums, archives, and other areas containing important assets and sensitive equipment or materials where water-based fire suppression systems would cause damage.

The FM200 system comprises FM200 cylinders, release valves, detection and control panels, piping, and discharge nozzles. The detection and control panels include heat detectors, smoke detectors, manual call points, and pre-action systems.

When a fire is detected, the FM200 system is activated to release FM200 gas into the protected area, extinguishing the fire by reducing the oxygen concentration to a level where combustion cannot occur. The FM200 gas is distributed through the piping system and nozzles to the protected area, which is designed to provide fast and effective fire suppression with minimal disruption to the protected area, occupants, and assets.

One of the main advantages of the FM200 system is its effectiveness in suppressing fires within just a few seconds after activation. The gas is also safe for use in occupied spaces and leaves no residue, making it ideal for areas with sensitive electronic equipment. FM200 gas is environmentally friendly, with a low global warming potential and no ozone depletion potential.

FM200 fire extinguishing systems are common in high-value asset protection applications, such as data centers, server rooms, archives, museums, and clean rooms. The system is a reliable and efficient solution for fire protection, minimizing production downtime and protecting high-value assets from fire damage.

• Electronic computer rooms, data processing centers, and telecommunications facilities
• Process control rooms and expensive medical equipment areas
• Industrial equipment, libraries, museums, and art galleries
• Clean rooms and anechoic chambers
• Fire-prone locations such as paint-spraying production lines, aging electrical equipment, rolling machines, printing machines, oil switches, oil-immersed transformers, melt impregnating tanks, large generators, and drying equipment
• Cement production processes involving pulverized coal
• Ship engine rooms and cargo holds

One of the key advantages of this agent is that it can be used for all classes of fire except metal fires. It is a clean agent, leaving no residue or pollution after extinguishing.

The system is highly efficient for protecting your assets. Because it is a complete system, it includes an extinguishing device that puts out fire in a short time — specifically, in less than 10 seconds. This means the entire agent is discharged in that short window, flooding the protected area completely. In addition, the system features a time-delay mechanism of approximately 2 minutes, providing enough time to evacuate people from the hazardous area when a fire occurs.

Unlike piped network type FM200 automatic fire suppression systems, this system is simple to install. Because there is no pipeline installation required, it saves considerable cost when the protected zone is relatively small and involves no more than three zones.

The illustration below shows the working principle of the whole system.

Below is a mimic diagram of the single cabinet type FM200 automatic fire suppression system.

Guangzhou Xingjin Fire Equipment Co., Ltd. is located in Guangzhou, surrounded by convenient transportation and a beautiful environment, and plays an important role in communication between China and the world. We are a manufacturer dedicated to the study and development of HFC-227ea (FM200) products, supported by a professional and mature team that includes a program design team, a skilled installation team, a quality detection team, and an after-sales service team.

Our popular FM200 products are widely used and include the pipe network FM200 fire suppression system, the cabinet type FM200 fire suppression system, the automatic FM200 fire extinguisher (ceiling-mounted style), the fire detecting tube suppression system, and the automatic fire suppression tube. As a result of high-quality products and services as well as our good reputation, our company is well received by customers in China.

• 5-year quality guarantee
• High-efficiency management system
• Advanced equipment and professional engineers ensuring all products are highly satisfactory
• 8×6 hours of technical support and service

• An efficient sales and after-sales team to resolve all client questions promptly
• 8×6 hours of technical support and service