Industrial Steel Walkway Grating 824mm Pre Painted Steel Coil Frame Lattice

Product Specification

Industrial Steel Walkway Grating 824mm Pre Painted Steel Coil Frame Lattice

1.Product Overview

Industrial steel walkway grating is used where load-bearing support, drainage opening, and safe foot traffic are required in one component. This product is suitable for steel floor platforms, catwalks, service walkways, step frames, and other structural access areas where open-grid design is preferred over solid plate flooring.

The listed configuration includes a 30x20 grating size and a minimum width of 824mm. The product is supplied as hot dipped galvanized steel grating and is intended for industrial environments where corrosion resistance, anti-slip performance, ventilation, and drainage all matter in daily operation.

2.Technical Solution

The grating is built from flat bearing bars combined with cross bars to form a rigid open-grid panel. In practical use, the final performance depends on four main factors: bearing bar size, bearing bar pitch, cross bar pitch, and support span.

The webpage lists bearing bar sizes from 25x3mm up to 75x10mm, which means the product family can be selected for different platform loads and span conditions. Bearing bar pitch options from 12.5mm to 60mm and cross bar pitch options from 38mm to 101.6mm allow the grid opening to be adjusted according to drainage requirement, pedestrian comfort, and structural demand.

Material options include Q235, A36, and SS304. Surface treatment options include black, hot dipped galvanising, and paint. For outdoor walkways and plant platforms, hot dipped galvanising is generally the more practical choice because it protects exposed steel surfaces and welded areas after fabrication.

3.Specifications

4.Application

This material is suitable for industrial steel floor grating, walkways, service platforms, step frames, and access routes inside factories, plants, and structural steel buildings.

It can also be used in municipal and utility projects where open-grid flooring is needed for drainage, ventilation, and easier cleaning. Typical uses include catwalks, equipment service areas, step panels, and structural maintenance platforms.

Because the open-grid structure allows water and debris to pass through, it is also suitable for wet operating areas where anti-slip surface performance is important.

5.Processing

• The grating can be selected by bearing bar size and pitch according to project load and span requirement. For walkway use, the bearing bar direction should follow the support span.
• Standard export packing is available, and the webpage also lists packaging with plastic film inside and woven bag or hessian bag outside, or according to customer requirement.
• Before ordering, the actual support spacing, load direction, opening requirement, and surface treatment should be confirmed so the grating panel matches the working condition instead of only the overall panel size.

6.Advantages

• The open-grid structure provides good drainage, air circulation, and light transmission in one panel.
• The listed bearing bar range from 25x3mm to 75x10mm makes the product adaptable to different load and span conditions.
• Hot dipped galvanising improves corrosion resistance for outdoor and industrial environments.
• The product offers anti-slip performance, easy installation and removal, and a high strength-to-weight balance for service walkway use.
• Multiple material options including Q235, A36, and SS304 help match cost target and service environment.

7.How to Choose

• Choose the bearing bar size according to actual span and service load. Smaller bars are more suitable for lighter pedestrian access, while larger bars are more suitable for higher loads or longer spans.
• Choose the bearing bar pitch according to the balance required between load support and open area. Tighter pitch gives a denser walking surface, while wider pitch gives more drainage and ventilation.
• Choose hot dipped galvanising for outdoor, wet, or industrial environments where corrosion protection is important.
• Choose SS304 when the application requires stainless steel material instead of carbon steel.

8.FAQ

Q1. What is the main use of this steel walkway grating
It is mainly used for industrial walkways, floor platforms, catwalks, service areas, and step frames.

Q2. What is the minimum width on this page
The listed minimum width is 824mm.

Q3. What materials are available
The webpage lists Q235, A36, and SS304.

Q4. Is hot dipped galvanising available
Yes. Hot dipped galvanising is one of the listed surface treatment options and is the main featured finish for this product.

Q5. How should the grating size be selected
It should be selected according to support span, load requirement, bearing bar size, and pitch rather than by panel width alone.