CS100 Portable Electrochemical Work Station Analyzer For Battery Lab 10V

The CS100 portable volt ampere analyzer has excellent stability and accuracy, advanced hardware, and fully functional software, providing an excellent research platform for scientific and technological workers in fields such as energy materials, environmental protection, biosensing, food and drug, and corrosion protection. Specifically applied to:
⚫ The instrument is compact and convenient, and can be used for testing the performance of battery materials in glove boxes;
⚫ Ultra low detection limit for heavy metal ions, suitable for water quality testing in the field of environmental protection;
⚫ High current accuracy, suitable for detecting small currents in biosensing directions;
⚫ Fully functional and suitable for effective ingredient detection in the food and drug industry;
⚫ Easy to carry, suitable for detecting outdoor bridge corrosion, soil corrosion, etc.
Technical advantages:
⚫ Compact and lightweight;
⚫ Equipment installation is simple and easy to operate;
⚫ High precision, with a current resolution of 100fA and a measurement accuracy of 0.1% of the range;
⚫ When conducting outdoor on-site measurements, directly use the USB port of the laptop for communication and power supply, which is fast and portable;
⚫ The circuit adopts a floating design and does not require an isolation transformer to measure the electrochemical parameters of the grounding system.

1. Hardware parameter indicators
Constant potential control range: ± 10V,

potential range range: ± 10V, ± 5V, ± 2.5V;

Minimum potential resolution: 10uV,

potential measurement accuracy: ± 0.1% @ Fullscale  1 mV;

Slot pressure: ± 11V;
Constant current control range: ± 45mA;
Current range: 50mA, 20mA, 2mA, 200 μ A, 20 μ A, 2 μ A, 200nA, 20nA, 2nA, 200pA, a total of 10
Range range;
Minimum current resolution: 10pA, current control accuracy: 0.1% @ Fullscale; Reference electrode input impedance: 1013 μ | | 8pF;
CV and LSV scanning speed: 0.001mV~10V/s;

Signal response bandwidth: 1MHz;
Impedance sweep frequency range: 10 μ Hz~1MHz;
Electrode wire type: three electrodes, CE, RE, WE;
Chassis design: aluminum alloy chassis;
Power supply method: Built in lithium battery power supply, 6000mAH@3.7V USB charging; Communication methods: USB communication, Bluetooth communication.

 

Rise time of potentiostat: less than 1ms, usually 0.8ms	Constant potential meter bandwidth (-3 decibels): 1MHz
Input bias current:<20pA	Potential noise:<10mV root mean square root
Pulse width of DPV and NPV: 0.001 to 10s	SWV frequency: 1 to 1kHz
Size and weight: 150 * 90 * 30mm, weight 220g	Minimum sampling interval for i-t: 1ms

 

2. Main functions of measurement and control software
Steady-state polarization
Open circuit potential measurement (OCP), constant potential polarization (i-t curve), constant current polarization, dynamic potential scanning (TAFEL curve), dynamic current scanning (DGP)
Transient polarization
Any constant potential step wave, any constant current step wave, constant potential step (VSTEP), constant current step (ISTEP)
Timing analysis
Chronopotentiometry (CP), chronoamperometry (CA), chronoamperometry (CC)
I-V Analyzer
Linear sweep voltammetry (LSV), linear cyclic voltammetry (CV), step cyclic voltammetry (SCV), square wave voltammetry (SWV), differential pulse voltammetry (DPV), conventional pulse voltammetry (NPV), conventional differential pulse voltammetry (DNPV), differential pulse current detection (DPA), double differential pulse current detection (DDPA), triple pulse current detection (TPA), integrated pulse current detection (iPad), alternating current voltammetry (ACV), second harmonic alternating current voltammetry (SHACV), Fourier transform alternating current voltammetry (FTACV)
Dissolution voltammetry
Constant potential stripping voltammetry, linear stripping voltammetry, stepwise stripping voltammetry, square wave stripping voltammetry, differential pulse stripping voltammetry, conventional pulse stripping voltammetry, conventional differential pulse stripping voltammetry, AC stripping voltammetry
AC impedance
Electrochemical impedance spectroscopy (EIS) - frequency scan, electrochemical impedance spectroscopy (EIS) - time scan, electrochemical impedance spectroscopy (EIS) - potential scan (Mott Schottky curve)
Corrosion measurement
Cyclic polarization curve (CPP), linear polarization curve (LPR), potentiodynamic reactivation method (EPR), electrochemical noise (EN), galvanic corrosion measurement (ZRA), hydrogen diffusion test
Battery testing
Battery charge and discharge testing, constant current charge and discharge, constant potential charge and discharge, constant potential intermittent titration technology (PITT), constant current intermittent titration technology (GITT)
Extended measurement
Disk ring electrode testing, digital recorder, waveform generator, and other peripheral expansion ports (customized)