Beijing Silk Road Enterprise Management Services Co., Ltd.
| Power Dissipation | 145mW |
| Load Voltage | 30V |
| Output Current | 15mA |
| Low Level Delay Time | 550ns |
| High Level Delay Time | 400ns |
| Reverse Voltage | 5V |
| Current transfer ratio | 44% |
| Voltage - Forward(Vf) | 1.5V |
| Voltage - Supply | 4.5V~30V |
| Forward Current(If) | 25mA |
| Operating Temperature | -40℃~+100℃ |
| CMTI(kV/us) | 30kV/us |
| Number of Channels | 1 |
| Input threshold current | 5mA |
| Isolation Voltage(Vrms) | 3.75kV |
| Input Type | DC |
| Description | 30V 15mA 5V 1.5V 4.5V~30V DC SO-5 Logic Output Optoisolators RoHS |
| Mfr. Part # | HCPL-M456-C5H0 |
| Package | SO-5 |
| Model Number | HCPL-M456-C5H0 |
View Detail Information
Explore similar products
Dual output intelligent optocoupler Broadcom ACPL-339J-500E for driving IGBT and
optocoupler Broadcom ACPL-P480-500E for intelligent power modules featuring
IGBT gate drive optocoupler Broadcom HCPL-3120-000E with low output voltage and
Low threshold input optocoupler Broadcom HCPL-0300-500E designed for RS-232-C
Product Specification
| Power Dissipation | 145mW | Load Voltage | 30V |
| Output Current | 15mA | Low Level Delay Time | 550ns |
| High Level Delay Time | 400ns | Reverse Voltage | 5V |
| Current transfer ratio | 44% | Voltage - Forward(Vf) | 1.5V |
| Voltage - Supply | 4.5V~30V | Forward Current(If) | 25mA |
| Operating Temperature | -40℃~+100℃ | CMTI(kV/us) | 30kV/us |
| Number of Channels | 1 | Input threshold current | 5mA |
| Isolation Voltage(Vrms) | 3.75kV | Input Type | DC |
| Description | 30V 15mA 5V 1.5V 4.5V~30V DC SO-5 Logic Output Optoisolators RoHS | Mfr. Part # | HCPL-M456-C5H0 |
| Package | SO-5 | Model Number | HCPL-M456-C5H0 |
The HCPL-M456 is an intelligent power module interface optocoupler that uses a GaAsP LED optically coupled to a high-gain photodetector. Its minimal propagation delay difference makes it ideal for improving inverter efficiency by reducing switching dead-time in general IPM applications. It operates within an industrial temperature range of -40C to 100C.
| Parameter | Symbol | Min | Typical | Max | Unit | Test Condition |
|---|---|---|---|---|---|---|
| Electrical Characteristics (Unless otherwise specified, TA=-40C to +100C, VCC=4.5V to 30V, IF(on)=10mA to 20mA, VF(off)=-5V to 0.8V. Typical values are measured at TA=25, VCC=15V.) | ||||||
| Current Transfer Ratio | CTR | 44 | 90 | % | IF=10mA, VO=0.6V | |
| Low Level Output Current | IOL | 4.4 | 9.0 | mA | IF=10mA, VO=0.6V | |
| Low Level Output Voltage | VOL | 0.3 | 0.6 | V | IO=2.4mA | |
| Input Threshold Current | ITH | 1.5 | 5.0 | mA | VO=0.8V, IO=0.75mA | |
| High Level Output Current | IOH | 5 | 50 | uA | VF=0.8V | |
| High Level Supply Current | ICCH | 0.6 | 1.3 | mA | VF=0.8V, VO=Open | |
| Low Level Supply Current | ICCL | 0.6 | 1.3 | mA | IF=10mA, VO=Open | |
| Input Forward Voltage | VF | 1.5 | 1.8 | V | IF=10mA | |
| Forward Voltage Temp. Coefficient | VF/TA | -1.6 | mV/ | IF=10mA | ||
| Input Breakdown Voltage | BVR | 5 | V | IR=10uA | ||
| Input Capacitance | CIN | 60 | pF | f=1MHz, VF=0V | ||
| Switching Characteristics (RL=20K, Unless otherwise specified, TA=-40C to +100C, VCC=4.5V to 30V, IF(on)=10mA to 20mA, VF(off)=-5V to 0.8V. Typical values are measured at TA=25, VCC=15V.) | ||||||
| Low Level Output Delay Time | tPHL | 30 | 200 | 400 | ns | CL=100pF |
| High Level Output Delay Time | tPLH | 130 | 270 | 550 | ns | CL=100pF |
| Pulse Width Distortion | PWD | 200 | 450 | ns | ||
| Propagation Delay Difference (Any two paths) | tPLH-tPHL | -150 | 200 | 450 | ns | CL=100pF |
| High Level Output Common Mode Transient Rejection | CMH | 15 | 30 | kV/us | IF=0mA, VO3.0V | |
| Low Level Output Common Mode Transient Rejection | CML | 15 | 30 | kV/us | IF=10mA, VO1.0V | |
| Package Characteristics | ||||||
| Input-Output Isolation Breakdown Voltage | VISO | 3750 | Vrms | RH<50%, t=1min, TA=25C | ||
| Input-Output Resistance | RI-O | 1012 | VI-O=500Vdc | |||
| Input-Output Capacitance | CI-O | 0.6 | pF | f=1MHz | ||
| Maximum Ratings | ||||||
| Storage Temperature | TS | -55 | 125 | |||
| Operating Temperature | TA | -40 | 100 | |||
| Average Input Current | IF(AVG) | 25 | mA | |||
| Peak Input Current (50% duty cycle, 1us pulse width) | IF(PEAK) | 50 | mA | |||
| Transient Input Current (Pulse width <1us, 300pps) | IF(TRAN) | 1 | A | |||
| Reverse Input Voltage (Pin 3-1) | VR | 5 | V | |||
| Average Output Current (Pin 5) | IO(AVG) | 15 | mA | |||
| Output Voltage (Pin 5-4) | VO | -0.5 | 30 | V | ||
| Supply Voltage (Pin 6-4) | VCC | -0.5 | 30 | V | ||
| Output Dissipation Power | PO | 100 | mW | |||
| Total Dissipation Power | PT | 145 | mW | |||
| Recommended Operating Conditions | ||||||
| Supply Voltage | VCC | 4.5 | 30 | V | ||
| Output Voltage | VO | 0 | 30 | V | ||
| Forward Input Current (ON) | IF(ON) | 10 | 20 | mA | ||
| Forward Input Voltage (OFF) | VF(OFF) | -5 | 0.8 | V | ||
| Operating Temperature | TA | -40 | 100 | |||
Conventional electrostatic discharge (ESD) precautions are recommended when handling and assembling this device to prevent damage or degradation due to ESD.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun... Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun...
Get in touch with us
Leave a Message, we will call you back quickly!