| Load Voltage | 20V |
| Power Dissipation | 75mW |
| Output Current | 25mA |
| Low Level Delay Time | 250ns |
| High Level Delay Time | 250ns |
| Reverse Voltage | 5V |
| Voltage - Forward(Vf) | 1.57V |
| Voltage - Supply | 4.5V~20V |
| Forward Current(If) | 10mA |
| Operating Temperature | -40℃~+100℃ |
| CMTI(kV/us) | 10kV/us |
| Number of Channels | 1 |
| Input threshold current | 1.6mA |
| Isolation Voltage(Vrms) | 3.75kV |
| Input Type | DC |
| Description | 20V 25mA 5V 1.57V 4.5V~20V DC SOP-5-175mil Logic Output Optoisolators RoHS |
| Mfr. Part # | TLP105(TPL,F) |
| Package | SOP-5-175mil |
| Model Number | TLP105(TPL,F) |
View Detail Information
Explore similar products
Dual output intelligent optocoupler Broadcom ACPL-339J-500E for driving IGBT and
optocoupler Broadcom ACPL-P480-500E for intelligent power modules featuring
IGBT gate drive optocoupler Broadcom HCPL-3120-000E with low output voltage and
Low threshold input optocoupler Broadcom HCPL-0300-500E designed for RS-232-C
Product Specification
| Load Voltage | 20V | Power Dissipation | 75mW |
| Output Current | 25mA | Low Level Delay Time | 250ns |
| High Level Delay Time | 250ns | Reverse Voltage | 5V |
| Voltage - Forward(Vf) | 1.57V | Voltage - Supply | 4.5V~20V |
| Forward Current(If) | 10mA | Operating Temperature | -40℃~+100℃ |
| CMTI(kV/us) | 10kV/us | Number of Channels | 1 |
| Input threshold current | 1.6mA | Isolation Voltage(Vrms) | 3.75kV |
| Input Type | DC | Description | 20V 25mA 5V 1.57V 4.5V~20V DC SOP-5-175mil Logic Output Optoisolators RoHS |
| Mfr. Part # | TLP105(TPL,F) | Package | SOP-5-175mil |
| Model Number | TLP105(TPL,F) |
The Toshiba TLP105 is a high-speed photo coupler featuring an infrared emitting diode optically coupled to a high-gain, high-speed photodetector. Housed in a 6-pin MFSOP, it offers a totem-pole output capable of both sinking and sourcing current. Its internal Faraday shield provides a guaranteed common-mode transient immunity of 10 kV/s. The TLP105 has a non-inverting output, with an inverting-output version, the TLP108, also available. It is suitable for isolated bus drivers, high-speed line receivers, and microprocessor system interfaces.
| Characteristic | Symbol | Condition | Min | Typ. | Max | Unit |
|---|---|---|---|---|---|---|
| Recommended Operating Conditions | ||||||
| Input Current, ON | IF(ON) | 2 | 10 | mA | ||
| Input Voltage, OFF | VF(OFF) | 0 | 0.8 | V | ||
| Supply Voltage* | VCC | 4.5 | 20 | V | ||
| Operating Temperature | Topr | -40 | 100 | C | ||
| Fan-out (TTL Load) | N | 4 | ||||
| Absolute Maximum Ratings | ||||||
| LED Forward Current | IF | (Ta = 25C) | 20 | mA | ||
| Forward Current Derating (Ta 83C) | IF/C | -0.48 | mA/C | |||
| Peak Transient Forward Current (Note1) | IFPT | Pulse width 1 s, 300 pps | 1 | A | ||
| Reverse Voltage | VR | 5 | V | |||
| Input Power Dissipation | PD | (Ta = 25C) | 40 | mW | ||
| Input Power Dissipation derating (Ta 83C) | PD/C | -0.95 | mW/C | |||
| Output Current 1 | IO1 | (Ta 25C) | 25/-15 | mA | ||
| Output Current 2 | IO2 | (Ta 100C) | 5/-5 | mA | ||
| Output Current Derating (Ta 25C) | IO1/C | -0.26/-0.13 | mA/C | |||
| Peak Output Current (Note2) | IOP | Pulse width 5 s, duty cycle 0.025 | 50/-50 | mA | ||
| Output Voltage | VO | -0.5 | 20 | V | ||
| Output Power Dissipation | PO | (Ta = 25C) | 75 | mW | ||
| Output Power Dissipation Derating (Ta 25C) | PO /C | -0.75 | mW/C | |||
| Supply Voltage | VCC | -0.5 | 20 | V | ||
| Operating Temperature Range | Topr | -40 | 100 | C | ||
| Storage Temperature Range | Tstg | -55 | 125 | C | ||
| Lead Solder Temperature (10 s) | Tsol | 260 | C | |||
| Isolation Voltage (AC, 60 s, R.H. 60 %) (Note3) | BVs | 3750 | Vrms | |||
| Electrical Characteristics | ||||||
| Input Forward Voltage | VF | IF = 10 mA, Ta = 25 C | 1.45 | 1.57 | 1.75 | V |
| Temperature Coefficient of Forward Voltage | VF/Ta | IF=10 mA | -2.0 | mV/C | ||
| Input Reverse Current | IR | VR = 5 V, Ta = 25 C | 10 | A | ||
| Input Capacitance | CT | V = 0 V, f = 1 MHz, Ta = 25 C | 100 | pF | ||
| Logic Low Output Voltage | VOL | IOL = 3.5 mA, VF = 0.8 V | 0.2 | 0.6 | V | |
| Logic High Output Voltage | VOH | IOL = -2.6 mA, IF = 5 mA, VCC = 4.5 V | 2.7 | 4.0 | V | |
| Logic High Output Voltage | VOH | IOL = -2.6 mA, IF = 5 mA, VCC = 20 V | 17.4 | 19.0 | V | |
| Logic Low Supply Current | ICCL | VF = 0 V, VCC = 20 V | 3.0 | mA | ||
| Logic Low Supply Current | ICCL | VF = 0 V, VCC = 5.5 V | 3.0 | mA | ||
| Logic High Supply Current | ICCH | IF = 5 mA, VCC = 20 V | 3.0 | mA | ||
| Logic High Supply Current | ICCH | IF = 5 mA, VCC = 5.5 V | 3.0 | mA | ||
| Logic Low Short Circuit Output Current (Note 1) | IOSL | VCC = VO = 5.5 V | 15 | 80 | mA | |
| Logic Low Short Circuit Output Current (Note 1) | IOSL | VCC = VO = 20 V | 20 | 90 | mA | |
| Logic High Short Circuit Output Current (Note 1) | IOSH | IF = 5 mA, VO = GND, VCC = 5.5 V | -5 | -15 | mA | |
| Logic High Short Circuit Output Current (Note 1) | IOSH | IF = 5 mA, VO = GND, VCC = 20 V | -10 | -20 | mA | |
| Input Current Logic High Output | IFLH | IO = -2.6 mA, VO > 2.4 V | 0.4 | 1.6 | mA | |
| Input Voltage Logic Low Output | VFHL | IO = 3.5 mA, VO < 0.4 V | 0.8 | V | ||
| Input Current Hysteresis | IHYS | VCC = 5 V | 0.05 | mA | ||
| Isolation Characteristics | ||||||
| Capacitance input to output | CS | VS = 0 V, f = 1 MHz | 0.8 | pF | ||
| Isolation resistance | RS | R.H. 60 %, VS = 500 V | 11012 | 1014 | ||
| Isolation voltage | BVs | AC,60 s | 3750 | Vrms | ||
| Switching Characteristics | ||||||
| Propagation Delay Time to Logic High output | tpLH | IF = 03 mA | 30 | 150 | 250 | ns |
| Propagation Delay Time to Logic Low output | tpHL | IF = 30 mA | 30 | 150 | 250 | ns |
| Switching Time Dispersion between ON and OFF | |tpHLtpLH| | 220 | ns | |||
| Rise Time (10 90 %) | tr | IF = 03 mA , VCC = 5 V | 30 | 75 | ns | |
| Fall Time (90 10 %) | tf | IF = 30 mA , VCC =5 V | 30 | 75 | ns | |
| Common Mode transient Immunity at High Level Output | CMH | VCM = 1000 Vp-p, IF = 5 mA, VCC =20 V, Ta = 25 C | -10000 | V/s | ||
| Common Mode transient Immunity at Low Level Output | CML | VCM = 1000 Vp-p, IF = 0 mA, VCC = 20 V, Ta = 25 C | 10000 | V/s | ||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification:
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun... Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun...
Get in touch with us
Leave a Message, we will call you back quickly!