Beijing Silk Road Enterprise Management Services Co., Ltd.
| Data Rate | - |
| Operating Temperature | -40℃~+110℃ |
| Propagation Delay(tpd) | 150ns;150ns |
| Input threshold current | 6mA |
| Isolation voltage(Vrms) | 5kV |
| Voltage - Supply | 15V~30V |
| Voltage - Forward(Vf) | 1.7V |
| CMTI(kV/us) | 35kV/us |
| Number of Channels | 2 |
| Input Type | DC |
| Description | 15V~30V 1.7V DC SOIC-16-300mil Isolators - Gate Drivers RoHS |
| Mfr. Part # | TLP5214A(D4,E |
| Package | SOIC-16-300mil |
| Model Number | TLP5214A(D4,E |
View Detail Information
Explore similar products
High Speed Gate Drive Optocoupler KTP HCPL-3120-C1LO with Low Input Current and
IGBT Gate Driver Optocoupler KTP ACPL-W341-C5L0 with High Voltage Output and 3A
Robust optocoupler KTP HCPL-3120-C5LO designed for power device driving and high
Gate Drive Optocoupler KTP HCPL-3150-C5L0 Featuring 1.0A Output Current for
Product Specification
| Data Rate | - | Operating Temperature | -40℃~+110℃ |
| Propagation Delay(tpd) | 150ns;150ns | Input threshold current | 6mA |
| Isolation voltage(Vrms) | 5kV | Voltage - Supply | 15V~30V |
| Voltage - Forward(Vf) | 1.7V | CMTI(kV/us) | 35kV/us |
| Number of Channels | 2 | Input Type | DC |
| Description | 15V~30V 1.7V DC SOIC-16-300mil Isolators - Gate Drivers RoHS | Mfr. Part # | TLP5214A(D4,E |
| Package | SOIC-16-300mil | Model Number | TLP5214A(D4,E |
The TLP5214A is a highly integrated 4.0 A output current IGBT gate drive photocoupler housed in a long creepage and clearance SO16L package. This smart gate driver photocoupler includes functions of IGBT desaturation detection, isolated fault status feedback, soft IGBT turn-off, active Miller cramping, and under voltage lockout (UVLO). It features desaturation leading edge blanking time, filtering time, and optimized soft-shutdown performance for secure operation. Suitable for driving IGBT and power MOSFET in inverter applications, it consists of two infrared LEDs and two high-gain, high-speed ICs for high current, high-speed output control and fault status feedback.
| Characteristic | Symbol | Min | Typ. | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Absolute Maximum Ratings | ||||||
| LED Input forward current | IF | 25 | mA | |||
| Input forward current derating (Ta 95C) | IF/Ta | -1 | mA/C | |||
| Peak transient input forward current | IFPT | 1 | A | Pulse width PW 1 s, 300 pps | ||
| Peak transient input forward current derating (Ta 95C) | IFPT/Ta | -25 | mA/C | |||
| Reverse input voltage | VR | 6 | V | |||
| Input power dissipation | PD | 145 | mW | |||
| Input power dissipation derating (Ta 95C) | PD /Ta | -5.0 | mW/C | |||
| Detector Positive input supply voltage | VCC1 | -0.5 | 7 | V | ||
| H peak output current | IOPH | -4.0 | A | Ta = -40 to 110 C | ||
| L peak output current | IOPL | +4.0 | A | Ta = -40 to 110 C | ||
| FAULT output current | IFAULT | 8 | mA | |||
| FAULT pin voltage | VFAULT | -0.5 | VCC1 | V | ||
| Total output supply voltage (VCC2-VEE) | -0.5 | 35 | V | |||
| Negative output supply voltage (VE-VEE) | -0.5 | 15 | V | |||
| Positive output supply voltage (VCC2-VE) | -0.5 | 35 - (VE-VEE) | V | |||
| Output voltage | VO | -0.5 | VCC2 | V | ||
| Peak clamping sinking current | IClamp | 1.7 | A | |||
| Miller clamping pin voltage | VClamp | -0.5 | VCC2 | V | ||
| DESAT voltage | VDESAT | VE | VE + 10 | V | ||
| Output power dissipation | PO | 410 | mW | |||
| Output power dissipation derating (Ta 95C) | PO /Ta | -14.0 | mW/C | |||
| Operating temperature range | Topr | -40 | 110 | C | ||
| Storage temperature range | Tstg | -55 | 125 | C | ||
| Lead soldering temperature (10 s) | Tsol | 260 | C | For the effective lead soldering area. | ||
| Isolation voltage (AC, 60 s, R.H. 60%) | BVS | 5000 | Vrms | Considered a two-terminal device. | ||
| Recommended Operating Conditions | ||||||
| Total output supply voltage (Note 1) | (VCC2-VEE) | 15 | 30 | V | VCC2 rise slope under 3.0 V / s. | |
| Negative output supply voltage | (VE-VEE) | 0 | 15 | V | ||
| Positive output supply voltage | (VCC2-VE) | 15 - (VE-VEE) | 30 - (VE-VEE) | V | ||
| Positive input supply voltage | VCC1 | 3.3 | 5.5 | V | ||
| Input on-state current (Note 2) | IF(ON) | 7.5 | 10 | mA | Input signal rise time (fall time) 0.5 s. | |
| Input off-state voltage | VF(OFF) | 0 | 0.8 | V | ||
| Operating frequency (Note 3) | f | 50 | kHz | Exponential waveform. IOPH -4.0 A ( 90 ns), IOPL 4.0 A ( 90 ns), Ta = 110 C | ||
| Electrical Characteristics | ||||||
| Input forward voltage | VF | 1.4 | 1.7 | V | IF = 10 mA, Ta = 25C | |
| Input reverse current | IR | 10 | A | VR = 5 V | ||
| Input capacitance | Ct | 95 | pF | V = 0 V, f = 1 MHz, Ta = 25 C | ||
| FAULT low level output voltage | VFAULTL | 0.2 | 0.4 | V | IFAULT = 1.1 mA, VCC1 = 5.5 V / 3.3 V | |
| FAULT high level output current | IFAULTH | 0.5 | A | VFAULT = 5.5 V, VCC1 = 5.5 V / 3.3 V, Ta = 25 C | ||
| High level output current (Note 1) | IOPH | -1.2 | -4.0 | A | VO = VCC2 - 4 V | |
| Low level output current (Note 1) | IOPL | 3.5 | 5.5 | A | VO = VEE + 2.5 V / VEE + 7 V | |
| Low level output current during fault condition | IOLF | 90 | 150 | 230 | mA | VO - VEE = 14 V |
| High level output voltage | VOH | VCC2-0.3 | VCC2-0.1 | V | IO = -100 mA | |
| Low level output voltage | VOL | 0.1 | 0.2 | V | IO = 100 mA | |
| Clamp pin threshold voltage | VtClamp | 2.5 | V | |||
| Clamp low level sinking current | ICL | 0.56 | 1.8 | A | VO = VEE + 2.5 V | |
| High level supply current | ICC2H | 2.4 | 3.8 | mA | IO = 0 mA | |
| Low level supply current | ICC2L | 2.3 | 3.8 | mA | IO = 0 mA | |
| Blanking capacitor charging current | ICHG | -0.33 | -0.24 | -0.13 | VDESAT = 2 V | |
| Blanking capacitor discharge current | IDSCHG | 10 | 49 | VDESAT = 7 V | ||
| DESAT threshold voltage | VDESAT | 5.9 | 6.5 | 7.5 | V | VCC2 - VE VUVLO- |
| UVLO threshold voltage (Upper) | VUVLO+ | 10.5 | 11.6 | 13.5 | V | VO 5 V |
| UVLO threshold voltage (Lower) | VUVLO- | 9.2 | 10.3 | 11.1 | V | VO 5 V |
| UVLO hysteresis | UVLOHYS | 1.3 | ||||
| Threshold input current (L/H) | IFLH | 2.6 | 6 | mA | VCC2 = 30 V, VO < 5 V | |
| Threshold input voltage (H/L) | VFHL | 0.8 | V | VCC2 = 30 V, VO > 5 V | ||
| Isolation Characteristics | ||||||
| Capacitance input to output | CS | 1.0 | pF | Vs = 0 V, f = 1 MHz | ||
| Isolation resistance | RS | 1012 | 1014 | R.H. 60 %, VS = 500 V | ||
| Isolation voltage | BVS | 5000 | Vrms | AC, 60 s | ||
| Switching Characteristics | ||||||
| Propagation delay time (L H) | tpLH | 50 | 85 | 150 | ns | Rg = 10 , Cg = 25 nF, VCC2 = 30 V, IF = 0 10 mA |
| Propagation delay time (H L) | tpHL | 50 | 90 | 150 | ns | IF = 10 0 mA |
| Output rise time (10-90 %) | tr | 32 | IF = 0 10 mA | |||
| Output fall time (90-10 %) | tf | 18 | IF = 10 0 mA | |||
| Pulse width distortion | | tpHL-tpLH | | 50 | IF = 0 10 mA | |||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun... Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun...
Get in touch with us
Leave a Message, we will call you back quickly!