Beijing Silk Road Enterprise Management Services Co., Ltd.
| Rise time | 50ns |
| Fall time | 50ns |
| Output Current | 2.5A |
| Operating Temperature | -40℃~+105℃ |
| Reverse Voltage | 5V |
| Forward Current(If) | 25mA |
| Input type | DC |
| Isolation Voltage(Vrms) | 5kV |
| Pd - Power Dissipation | 150mW |
| Description | 2.5A 5V DC SMD Transistor, Photovoltaic Output Optoisolators RoHS |
| Mfr. Part # | LTV-330J-TP1 |
| Package | SMD |
| Model Number | LTV-330J-TP1 |
View Detail Information
Explore similar products
High Voltage Dual Channel Photovoltaic Mosfet Driver Broadcom ASSR-V621-002E for
Signal Isolation Photocoupler Dual Inline Package LITEON LTV-817S-TA1 with
Optocoupler With High AC Isolation Voltage VISHAY TCMD4000 Suitable For
Single Channel Half Pitch Phototransistor Optocoupler Broadcom ACPL 214 500E for
Product Specification
| Rise time | 50ns | Fall time | 50ns |
| Output Current | 2.5A | Operating Temperature | -40℃~+105℃ |
| Reverse Voltage | 5V | Forward Current(If) | 25mA |
| Input type | DC | Isolation Voltage(Vrms) | 5kV |
| Pd - Power Dissipation | 150mW | Description | 2.5A 5V DC SMD Transistor, Photovoltaic Output Optoisolators RoHS |
| Mfr. Part # | LTV-330J-TP1 | Package | SMD |
| Model Number | LTV-330J-TP1 |
The LTV-330J is an advanced 2.5 A output current, intelligent gate driver designed for IGBT VCE fault protection. It offers integrated VCE detection, under voltage lockout (UVLO), "soft" IGBT turn-off, isolated open collector fault feedback, and active Miller clamping for design flexibility and circuit protection. This optocoupler is ideal for driving power IGBTs and MOSFETs in motor control inverter applications, suitable for directly driving IGBTs up to 1200 V and 150 A, or for driving discrete power stages for higher-rated IGBTs. It operates within a temperature range of -40C to +105C with an insulation voltage of VIORM = 1414 VPEAK.
| Parameter | Symbol | Min | Max | Unit | Notes |
| Absolute Maximum Ratings | |||||
| Storage Temperature | Tstg | -55 | +125 | C | |
| Operating Temperature | Topr | -40 | +105 | C | |
| Output IC Junction Temperature | TJ | 125 | C | ||
| Average Forward Input Current | IF | 25 | mA | 3 | |
| Reverse Input Voltage | VR | 5 | V | ||
| Peak Transient Input Current | IF(TRAN) | 1 | A | 1 | |
| High Peak Output Current | IOH(PEAK) | 2.5 | A | 2 | |
| Low Peak Output Current | IOL(PEAK) | 2.5 | A | 2 | |
| Positive Input Supply Voltage | VCC1 | -0.5 | 7 | V | |
| FAULT Output Current | Ifault | 8 | mA | ||
| FAULT Pin Voltage | VFAULT | -0.5 | VCC1 | V | |
| Total Output Supply Voltage (VCC2 VEE) | -0.5 | 35 | V | ||
| Negative Output Supply Voltage (VE-VEE) | -0.5 | 15 | V | ||
| Positive Output Supply Voltage (VCC2 VE) | -0.5 | 30-(VE-VEE) | V | ||
| Output Voltage | VO(PEAK) | -0.5 | 35 | V | |
| Peak Clamping Sinking Current | IClamp | 1.7 | A | ||
| Miller Clamping Pin Voltage | VClamp | -0.5 | VCC2 | V | |
| DESAT Voltage | VDESAT | VE | VE+10 | V | |
| Power Dissipation | PI | 150 | mW | ||
| Output Power Dissipation | PO | 600 | mW | ||
| Lead Solder Temperature (10s) | Tsol | 260 | C | ||
| Recommended Operating Conditions | |||||
| Operating Temperature | TA | -40 | 105 | C | |
| Total Output Supply Voltage (VCC2-VEE) | 15 | 30 | V | ||
| Negative Output Supply Voltage (VE-VEE) | 0(-0.5) | 15 | V | ||
| Positive Output Supply Voltage (VCC2-VE) | 15(-0.5) | 30- (VE-VEE) | V | ||
| Input Current (ON) | IFL(ON) | 8 | 12 | mA | |
| Input Voltage (OFF) | VF(OFF) | -3.6(0) | 0.8 | V | |
| Features | |||||
| Maximum Peak Output Current | 2.5 | A | |||
| Maximum Propagation Delay | 200 | ns | |||
| Maximum Pulse Width Distortion (PWD) | 100 | ns | |||
| Minimum Common Mode Rejection (CMR) at VCM = 1500 V | 50 | kV/us | |||
| Maximum Supply Current | ICC | 4.5 | mA | ||
| Wide VCC Operating Range | VCC | 15 | 30 | Volts | |
| Guaranteed Performance over Temperature | -40 | +105 | C | ||
| MSL Level | 1 | ||||
| Insulation Voltage | VIORM | 1414 | Vpeak | ||
| IEC/EN/DIN EN 60747-5-5 Insulation Characteristics | |||||
| Maximum Working Insulation Voltage | VIORM | 1414 | Vpeak | ||
| Input-to-Output Test Voltage, Method b (Production Test) | VPR | 2651 | Vpeak | tm = 1 sec, Partial Discharge < 5 pC | |
| Input-to-Output Test Voltage, Method a (Type and Sample Test) | VPR | 2262 | Vpeak | tm = 10 sec, Partial Discharge < 5 pC | |
| Highest Allowable Overvoltage | VIOTM | 8000 | Vpeak | tini = 60 sec | |
| Insulation Resistance at TS, VIO = 500 V | RS | 109 | |||
| Insulation and Safety Related Specifications | |||||
| Minimum External Air Gap (External Clearance) | L(101) | 8.3 | mm | Measured from input terminals to output terminals, shortest distance through air. | |
| Minimum External Tracking (External Creepage) | L(102) | 8.3 | mm | Measured from input terminals to output terminals, shortest distance path along body. | |
| Minimum Internal Plastic Gap (Internal Clearance) | 0.5 | mm | Through insulation distance, conductor to conductor. | ||
| Tracking Resistance (Comparative Tracking Index) | CTI | >175 | V | DIN IEC 112/VDE 0303 Part 1 | |
| Material Group | IIIa | (DIN VDE 0110, 1/89, Table 1) | |||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun... Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun...
Get in touch with us
Leave a Message, we will call you back quickly!