Beijing Silk Road Enterprise Management Services Co., Ltd.
| Fall time | 35ns |
| Rise time | 35ns |
| Output Current | 3A |
| Operating Temperature | -40℃~+105℃ |
| Load Voltage | - |
| Load Type | - |
| Reverse Voltage | 5V |
| Current transfer ratio | -;- |
| Forward Current(If) | 25mA |
| Input type | DC |
| Isolation Voltage(Vrms) | 5kV |
| Pd - Power Dissipation | 745mW |
| Number of Channels | 1 |
| Description | 3A 5V DC SMD-6P Transistor, Photovoltaic Output Optoisolators RoHS |
| Mfr. Part # | LTV-341W-TA1-H |
| Package | SMD-6P |
| Model Number | LTV-341W-TA1-H |
View Detail Information
Explore similar products
High Voltage Dual Channel Photovoltaic Mosfet Driver Broadcom ASSR-V621-002E for
Signal Isolation Photocoupler Dual Inline Package LITEON LTV-817S-TA1 with
Optocoupler With High AC Isolation Voltage VISHAY TCMD4000 Suitable For
Single Channel Half Pitch Phototransistor Optocoupler Broadcom ACPL 214 500E for
Product Specification
| Fall time | 35ns | Rise time | 35ns |
| Output Current | 3A | Operating Temperature | -40℃~+105℃ |
| Load Voltage | - | Load Type | - |
| Reverse Voltage | 5V | Current transfer ratio | -;- |
| Forward Current(If) | 25mA | Input type | DC |
| Isolation Voltage(Vrms) | 5kV | Pd - Power Dissipation | 745mW |
| Number of Channels | 1 | Description | 3A 5V DC SMD-6P Transistor, Photovoltaic Output Optoisolators RoHS |
| Mfr. Part # | LTV-341W-TA1-H | Package | SMD-6P |
| Model Number | LTV-341W-TA1-H |
The LTV-341 series Photocoupler is designed for driving power IGBTs and MOSFETs in motor control inverter applications and power supply inverters. It features an AlGaAs LED coupled to an integrated circuit with a power output stage, capable of delivering 2.5A peak output current to directly drive IGBTs up to 1200 V/200 A. For higher-rated IGBTs, it can drive a discrete power stage. The device offers rail-to-rail output voltage, fast propagation delays, and Under Voltage Lock-Out (UVLO) protection with hysteresis. Its operational parameters are guaranteed over a wide temperature range of -40C to +105C.
| Parameter | Symbol | LTV-341P | LTV-341W | Unit | Test Condition | Note | |
| Insulation and Safety Related Specification | |||||||
| Climatic Classification | 55/100/21 | 55/100/21 | |||||
| Pollution Degree (DIN VDE 0110/1.89) | 2 | 2 | |||||
| Maximum Working Insulation Voltage | VIORM | 891 | 1140 | Vpeak | |||
| Input to Output Test Voltage, Method b* | VPR | 1671 | 2137 | Vpeak | VIORM x 1.875 = VPR, 100% Production Test with tm = 1 sec, Partial discharge < 5 pC | ||
| Input to Output Test Voltage, Method a* | VPR | 1426 | 1824 | Vpeak | VIORM x 1.6 = VPR, Type and Sample Test, tm = 10 sec, Partial discharge < 5 pC | ||
| Highest Allowable Overvoltage (Transient Overvoltage tini = 60 sec) | VIOTM | 6000 | 8000 | Vpeak | |||
| Case Temperature | TS | 175 | 175 | C | |||
| Input Current | IS, INPUT | 150 | 150 | mA | |||
| Output Power | PS, OUTPUT | 600 | 600 | mW | |||
| Insulation Resistance at TS, VIO = 500 V | RS | >109 | >109 | ||||
| Minimum External Air Gap (External Clearance) | L(101) | 7.0 | 8.0 | mm | Measured from input terminals to output terminals, shortest distance through air. | ||
| Minimum External Tracking (External Clearance) | L(102) | 8.0 | 8.0 | mm | Measured from input terminals to output terminals, shortest distance | ||
| Tracking Resistance (Comparative Tracking Index) | CTI | >175 | >175 | V | DIN EN 60112 (VDE 0303 Teil 11) | ||
| Absolute Maximum Ratings | |||||||
| Storage Temperature | Tstg | -55 to +125 | C | ||||
| Operating Temperature | Topr | -40 to +105 | C | ||||
| Output IC Junction Temperature | TJ | to 125 | C | ||||
| Total Output Supply Voltage (VCC VEE) | 0 to 35 | V | |||||
| Average Forward Input Current | IF | to 25 | mA | ||||
| Reverse Input Voltage | VR | to 5 | V | ||||
| Peak Transient Input Current | IF(TRAN) | to 1.0 | A | PW 1 s, 300 pps | 1 | ||
| High Peak Output Current | IOH(PEAK) | to 3.0 | A | Exponential waveform. Pulse width 0.3 s, f 15 kHz | 2 | ||
| Low Peak Output Current | IOL(PEAK) | to 3.0 | A | Exponential waveform. Pulse width 0.3 s, f 15 kHz | 2 | ||
| Input Current (Rise/Fall Time) | tr(IN) /tf(IN) | to 500 | ns | 3 | |||
| Output Voltage | VO(PEAK) | to VCC | V | ||||
| Power Dissipation | PI | to 45 | mW | ||||
| Output IC Power Dissipation | PO | to 700 | mW | ||||
| Total Power Dissipation | PT | to 745 | mW | ||||
| Lead Solder Temperature | Tsol | to 260 | C | ||||
| Recommended Operating Conditions | |||||||
| Operating Temperature | TA | -40 to 105 | C | ||||
| Supply Voltage | VCC | 15 to 30 | V | ||||
| Input Current (ON) | IFL(ON) | 7 to 16 | mA | ||||
| Input Voltage (OFF) | VF(OFF) | -3.0 to 0.8 | V | 6 | |||
| Electrical Optical Characteristics | |||||||
| Input Forward Voltage | VF | 1.2 | 1.37 | V | IF = 10mA | 13 | |
| Input Forward Voltage Temperature Coefficient | VF/ T | -1.237 | mV/C | IF = 10mA | |||
| Input Reverse Voltage | BVR | 5 | V | IR = 10A | |||
| Input Threshold Current (Low to High) | IFLH | 1.8 | mA | VCC = 30 V, VO > 5V | 6, 7, 18 | ||
| Input Threshold Voltage (High to Low) | VFHL | 0.8 | V | VCC = 30 V, VO < 5V | |||
| Input Capacitance | CIN | 33 | pF | f = 1 MHz, VF = 0 V | |||
| Output High Level Supply Current | ICCH | 2.4 to 3.5 | mA | IF = 10 mA, VCC = 30V, VO = Open | 4, 5 | ||
| Low Level Supply Current | ICCL | 2.5 to 3.5 | mA | IF = 0 mA, VCC = 30V, VO = Open | |||
| High level output current | IOH | -1.0 | A | VO = (VCC 1.5 V) | 16 | ||
| Low level output current | IOL | 1.0 | A | VO = (VEE + 1.5 V) | 17 | ||
| High level output voltage | VOH | VCC - 0.3 | VCC - 0.1 | V | IF = 10mA, IO = -100mA | 1, 2, 14 | |
| Low level output voltage | VOL | VEE + 0.1 | VEE + 0.25 | V | IF = 0mA, IO = 100mA | 3, 15 | |
| UVLO Threshold | VUVLO+ | 11.0 | 12.7 to 13.5 | V | VO > 5V, IF = 10 mA | 19 | |
| UVLO Threshold | VUVLO- | 9.5 | 11.2 to 12.0 | V | VO < 5V, IF = 10 mA | ||
| UVLO Hysteresis | UVLOHYS | 1.5 | V | ||||
| Switching Specification | |||||||
| Propagation Delay Time to High Output Level | tPLH | 50 | 130 to 200 | ns | Rg = 10, Cg = 25nF, f = 10 kHz, Duty Cycle = 50% IF = 7 to 16 mA, VCC = 15 to 30V VEE = ground | 8, 9, 10, 11, 12, 20 | |
| Propagation Delay Time to Low Output Level | tPHL | 50 | 130 to 200 | Rg = 10, Cg = 25nF, f = 10 kHz, Duty Cycle = 50% IF = 7 to 16 mA, VCC = 15 to 30V VEE = ground | 8, 9, 10, 11, 12, 20 | ||
| Pulse Width Distortion | PWD | 5 to 70 | |||||
| Propagation delay difference between any two parts or channels | PDD | -100 | 100 | 3 | |||
| Output Rise Time (10 to 90%) | Tr | 35 | 20 | ns | |||
| Output Fall Time (90 to 10%) | Tf | 35 | |||||
| Common mode transient immunity at high level output | |CMH| | 35 | 50 | kV/s | TA = 25C, IF = 10 to 16 mA, VCM = 1500 V, VCC = 30 V | 21 | |
| Common mode transient immunity at low level output | |CML| | 35 | 50 | kV/s | TA = 25C, VF = 0 V, VCM = 1500 V, VCC = 30 V | 2 | |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun... Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun...
Get in touch with us
Leave a Message, we will call you back quickly!