Beijing Silk Road Enterprise Management Services Co., Ltd.
| Rise time | 50ns |
| Fall time | 50ns |
| Output Current | 5A |
| Operating Temperature | -40℃~+105℃ |
| Load Voltage | 35V |
| Reverse Voltage | 5V |
| Load Type | - |
| Current transfer ratio | -;- |
| Forward Current(If) | 25mA |
| Input type | DC |
| Isolation Voltage(Vrms) | 5kV |
| Pd - Power Dissipation | 150mW |
| Number of Channels | - |
| Description | 5A 35V 5V DC SMD Transistor, Photovoltaic Output Optoisolators RoHS |
| Mfr. Part # | LTV-333J-TP1 |
| Package | SMD |
| Model Number | LTV-333J-TP1 |
View Detail Information
Explore similar products
High Voltage Dual Channel Photovoltaic Mosfet Driver Broadcom ASSR-V621-002E for
Signal Isolation Photocoupler Dual Inline Package LITEON LTV-817S-TA1 with
Optocoupler With High AC Isolation Voltage VISHAY TCMD4000 Suitable For
Single Channel Half Pitch Phototransistor Optocoupler Broadcom ACPL 214 500E for
Product Specification
| Rise time | 50ns | Fall time | 50ns |
| Output Current | 5A | Operating Temperature | -40℃~+105℃ |
| Load Voltage | 35V | Reverse Voltage | 5V |
| Load Type | - | Current transfer ratio | -;- |
| Forward Current(If) | 25mA | Input type | DC |
| Isolation Voltage(Vrms) | 5kV | Pd - Power Dissipation | 150mW |
| Number of Channels | - | Description | 5A 35V 5V DC SMD Transistor, Photovoltaic Output Optoisolators RoHS |
| Mfr. Part # | LTV-333J-TP1 | Package | SMD |
| Model Number | LTV-333J-TP1 |
The LTV-333J series is an advanced, intelligent 5.0 A output current IGBT gate driver optocoupler designed for compact and affordable fault protection. It integrates VCE desaturation detection, under-voltage lockout (UVLO), soft IGBT turn-off, isolated open collector fault feedback, and active Miller clamping for enhanced design flexibility and circuit protection. Utilizing an AlGaAs LED optically coupled to an integrated circuit with a power output stage, it is ideal for driving power IGBTs and MOSFETs in motor control inverter applications, capable of directly driving IGBTs up to 1200 V and 150 A, or driving discrete power stages for higher-rated IGBTs. The optocoupler offers an insulation voltage of VIORM = 1414 VPEAK and guarantees operational parameters over a temperature range of -40C to +105C.
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Test Condition | Note |
| Electrical Characteristics | |||||||
| Input Forward Voltage | VF | 1.2 | 1.37 | 1.8 | V | IF = 10mA | |
| Input Forward Voltage Temperature Coefficient | VF/ T | -1.237 | mV/C | IF = 10mA | |||
| Input Reverse Voltage | VR | 5 | V | ||||
| Input Current (ON) | IFL(ON) | 8 | 12 | mA | |||
| Input Voltage (OFF) | VF(OFF) | -3.6(0) | 0.8 | V | |||
| Maximum Supply Current | ICC | 4.5 | mA | ||||
| Peak Output Current (Maximum) | IOH(PEAK) | 5 | A | 1 | |||
| Peak Output Current (Minimum) | IOL(PEAK) | 4.0 | A | 2 | |||
| Propagation Delay (Maximum) | 200 | ns | |||||
| Pulse Width Distortion (Maximum) | PWD | 100 | ns | ||||
| Common Mode Rejection (Minimum) | CMR | 50 | kV/us | VCM = 1500 V | |||
| Wide VCC Operating Range | VCC | 15 | 30 | Volts | |||
| Total Output Supply Voltage (VCC2-VEE) | 15 | 30 | V | ||||
| Negative Output Supply Voltage (VE-VEE) | 0(-0.5) | 15 | V | ||||
| Positive Output Supply Voltage (VCC2-VE) | 15(-0.5) | 30-(VE-VEE) | V | ||||
| Fault Output Current | IFAULT | 8 | mA | ||||
| Peak Clamping Sinking Current | IClamp | 1.7 | A | ||||
| Insulation Characteristics | |||||||
| Maximum Working Insulation Voltage | VIORM | 1414 | Vpeak | ||||
| Input-to-Output Test Voltage (Method b) | VPR | 2651 | Vpeak | tm = 1 sec, Partial Discharge < 5 pC | *a | ||
| Input-to-Output Test Voltage (Method a) | VPR | 2262 | Vpeak | tm = 10 sec, Partial Discharge < 5 pC | *a | ||
| Highest Allowable Overvoltage | VIOTM | 8000 | Vpeak | tini = 60 sec | |||
| Safety Limiting Values | |||||||
| Case Temperature | TS | 175 | C | ||||
| Input Current | IS, INPUT | 400 | mA | ||||
| Output Power | PS, OUTPUT | 1200 | mW | ||||
| Insulation Resistance | RS | 109 | TS, VIO = 500 V | ||||
| External Insulation | |||||||
| Minimum External Air Gap | L(101) | 8.3 | mm | ||||
| Minimum External Tracking | L(102) | 8.3 | mm | ||||
| Minimum Internal Plastic Gap | 0.5 | mm | |||||
| Tracking Resistance (CTI) | CTI | >175 | V | DIN IEC 112/VDE 0303 Part 1 | |||
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
300~500
Ecer Certification：
Verified Supplier
Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun... Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining and manufacture. Foun...
Get in touch with us
Leave a Message, we will call you back quickly!