Beijing Silk Road Enterprise Management Services Co., Ltd.
| Normal temperature Frequency Tolerance | ±20ppm |
| Frequency Stability | ±20ppm |
| Operating Temperature | -20℃~+75℃ |
| Load Capacitance | 12pF |
| Frequency | 28.63636MHz |
| Description | 12pF SMD2520-4P Crystals RoHS |
| Mfr. Part # | X2B02863ADC1H-W |
| Package | SMD2520-4P |
| Model Number | X2B02863ADC1H-W |
View Detail Information
Explore similar products
Quartz Crystal Resonator with 25 MHz Frequency KYX K2B250001010 SMD 2.0 by 1.6
Crystal Oscillator Liming 49MD-5.1302-20-10-10/B for Automotive Applications and
Crystal oscillator 38 megahertz frequency muRata XRCGB38M400FXH17R0 suitable for
crystal oscillator CREC 01XMD122JLVF026298200 for GPS Bluetooth mobile phones
Product Specification
| Normal temperature Frequency Tolerance | ±20ppm | Frequency Stability | ±20ppm |
| Operating Temperature | -20℃~+75℃ | Load Capacitance | 12pF |
| Frequency | 28.63636MHz | Description | 12pF SMD2520-4P Crystals RoHS |
| Mfr. Part # | X2B02863ADC1H-W | Package | SMD2520-4P |
| Model Number | X2B02863ADC1H-W |
The HSX221SA is a quartz crystal unit manufactured by HARMONY ELECTRONICS CORP. Designed for various product applications, this crystal operates at a nominal frequency of 28.636360 MHz. It features a holder type of HSX221SA and is suitable for integration into electronic devices requiring stable frequency generation. The product is available from factories located in Taiwan, Thailand, and China.
| Specification | Value | Notes |
|---|---|---|
| Nominal Frequency | 28.636360 MHz | |
| Holder Type | HSX221SA | Seam type |
| Frequency Tolerance | +/-20 ppm | at 25C +/-3C |
| Equivalent Resistance | 80 ohms Max. | / SERIES |
| Storage Temperature Range | -40C To +125C | |
| Operable Temperature Range | -20C To +70C | |
| Temperature Drift | +/-20ppm | -20C To +70C |
| Loading Capacitance (CL) | 12.0 pF | |
| Drive Level | 10 W | (100W Max.) |
| Shunt Capacitance | 2.0 pF Max. | |
| Insulation Resistance | More than 500M ohms | at DC 100V |
| Mode of Oscillation | Fundamental | |
| Shock Test (Frequency Variation) | Less than +/-5 ppm | Dropping from 120 cm height 3 times on Concrete floor |
| Shock Test (Resistance Variation) | Less than +/- 15 % or 2ohms max. | Dropping from 120 cm height 3 times on Concrete floor |
| Aging | Less than +/- 3 ppm/Year | |
| Dimensions | Refer to page 4 | |
| Marking | Refer to page 4 | Laser marking |
| Emboss Carrier Tape & Reel | Refer to page 6 and 7 | |
| Standard Packing Quantity | 3,000 PCS / REEL | |
| Carrier Tape Material | PS | |
| Top Tape Material | Polyester | Conductive |
| Cover Tape Release Strength | 0.1N to 0.7N | Pulling direction 165 to 180, Speed 300mm/min |
| Mechanical Endurance - Natural Drop | Refer to JIS C 60068-2-6 A | Dropping from 120 cm height 3 times on Concrete floor |
| Mechanical Endurance - Vibration | Refer to MIL-HDBK-781A 6.5.2/ JIS C 60068-2-6 A | Frequency 10-55Hz, Sine Wave full amplitude of 0.8mm to X, Y and Z 3 axes, Duration of 2 hours to each axis. |
| Mechanical Endurance - Sealing Tightness | 1.0x10-8 Pa-m/sec. Max. | Measured by Helium leak detector. |
| Mechanical Endurance - Solder Ability | Refer to JIS C 60068-2-20 B | Applying ROSIN Flux, dipping in solder bath at 245C+/-5C for 3+/-0.5 sec. |
| Mechanical Endurance - Substrate Bending | Refer to EIAJ ET-7403 A | Apply Pressure to the center of board until it is bent to 3 mm and hold for 5 1 sec. Pressure speed :0.5 mm / sec |
| Mechanical Endurance - Adhesion | Refer to EIAJ ET-7403 A | Apply pressure vertically to the side of specimen attached to the circuit board with the pressure jig. Pressure : 5N for 101 sec |
| Mechanical Endurance - Body Strength | Refer to EIAJ ET-7403 A | Apply pressure to the center of body with the R0.5 pressure jig. pressure :10N for 101sec |
| Environmental Performance - Humidity | Refer to JIS C 60068-2-3 A | Temperature 60 +/- 2 , RH 90~95%, Duration of 240 hours. |
| Environmental Performance - Storage in Low Temperature | Refer to JIS C 60068-2-1 A | -40C +/-2C, Duration of 240 hours. |
| Environmental Performance - Storage in High Temperature | Refer to JIS C 60068-2-2 A | +85C +/-2C, Duration of 240 hours. |
| Environmental Performance - Temperature Cycles | Refer to JIS C 0025 A | -40C +/-2C (30min) +85C +/-2C (30min) 25 cycles. |
| Soldering Condition (Reflow) | Refer to page 12 | Available for Lead Free Soldering |
| Soldering Condition (Solder Iron) | Bit temp.: 350max., Time:3sec max. | Each terminal solder a 1 time max. |
| Mounting | Designed for automatic insertion | Avoid mounting and processing by Ultrasonic welding. |
| Cleaning | Cleaning liquid which corrodes Nickel shall not be used. Ultra-sonic cleaning is possible, but check on your board. | |
| Storage | Keep away from high temperature and high humidity, direct sunlight, No dew. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer
Year Established:
2009
Employee Number:
>>300
Ecer Certification：
Verified Supplier
Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an... Company Profile Beijing Silk Road Enterprise Management Services Co.,Ltd. is a professional company focus on integrated circuit ic business. Beijing Silk Road will also responsible with exporting and logistic business. there is professional factory Beijing Silk Road which focus on desigining an...
Get in touch with us
Leave a Message, we will call you back quickly!